diff --git a/source/_components/binary_sensor.wirelesstag.markdown b/source/_components/binary_sensor.wirelesstag.markdown
new file mode 100644
index 00000000000..efe3eae81f4
--- /dev/null
+++ b/source/_components/binary_sensor.wirelesstag.markdown
@@ -0,0 +1,48 @@
+---
+layout: page
+title: "WirelessTag Binary Sensor"
+description: "Instructions on how to integrate Wireless Tags sensors within Home Assistant."
+date: 2018-03-26 21:49
+comments: false
+sidebar: true
+sharing: true
+footer: true
+logo: wirelesstag.png
+ha_category: Binary Sensor
+ha_iot_class: "Local Push and Cloud Polling"
+ha_release: 0.68
+---
+
+To get your [wirelesstag.net](http://wirelesstag.net) binary sensors working within Home Assistant, please follow the instructions for the general [WirelessTag component](/components/wirelesstag).
+
+To enable tags set up with your [wirelesstag.net](http://wirelesstag.net) account, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+  - platform: wirelesstag
+    monitored_conditions:
+      - presence
+      - door
+      - low_battery
+```
+
+{% configuration %}
+  monitored_conditions:
+    description: The conditions types to monitor; valid values are specified below
+    required: true
+    type: list
+{% endconfiguration %}
+
+The following conditions can be monitored:
+
+* (`presence`): On means in range, Off means out of range.
+* (`motion`): On when a movement was detected, Off when clear.
+* (`door`): On when a door is open, Off when the door is closed.
+* (`cold`): On means temperature become too cold, Off means normal.
+* (`heat`): On means hot, Off means normal.
+* (`dry`): On means too dry (humidity), Off means normal.
+* (`wet`): On means too wet (humidity), Off means normal.
+* (`light`): On means light detected, Off means no light.
+* (`moisture`): On means moisture detected (wet), Off means no moisture (dry).
+* (`low_battery`): On means tag battery is low, Off means normal.
diff --git a/source/_components/sensor.wirelesstag.markdown b/source/_components/sensor.wirelesstag.markdown
new file mode 100644
index 00000000000..5b811d400a8
--- /dev/null
+++ b/source/_components/sensor.wirelesstag.markdown
@@ -0,0 +1,41 @@
+---
+layout: page
+title: "WirelessTag Sensor"
+description: "Instructions on how to integrate your Wireless Tags sensors within Home Assistant."
+date: 2018-03-26 21:50
+comments: false
+sidebar: true
+sharing: true
+footer: true
+logo: wirelesstag.png
+ha_category: Sensor
+ha_iot_class: "Local Push and Cloud Polling"
+ha_release: 0.68
+---
+
+To get your [wirelesstag.net](http://wirelesstag.net) sensors working within Home Assistant, please follow the instructions for the general [WirelessTag component](/components/wirelesstag).
+
+To enable tags set up with your [wirelesstag.net](http://wirelesstag.net) account, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+sensor:
+  - platform: wirelesstag
+    monitored_conditions:
+      - temperature
+      - humidity
+```
+
+{% configuration %}
+  monitored_conditions:
+    description: The metrics types to monitor; valid values are specified below
+    required: true
+    type: list
+{% endconfiguration %}
+
+The following metrics can be monitored:
+
+* (`temperature`): Value is in Celsius or Fahrenheit (according to your settings at Tag Manager).
+* (`humidity`): Humidity level in %.
+* (`moisture`): Water level/soil moisture in % (applicable for Water Tag only).
+* (`light`): Brightness in lux (if supported by tag).
diff --git a/source/_components/switch.wirelesstag.markdown b/source/_components/switch.wirelesstag.markdown
new file mode 100644
index 00000000000..f9239b3d11d
--- /dev/null
+++ b/source/_components/switch.wirelesstag.markdown
@@ -0,0 +1,45 @@
+---
+layout: page
+title: "WirelessTag Switch"
+description: "Instructions on how to integrate your Wireless Tags sensors within Home Assistant."
+date: 2018-03-26 21:52
+comments: false
+sidebar: true
+sharing: true
+footer: true
+logo: wirelesstag.png
+ha_category: Switch
+ha_iot_class: "Local Push and Cloud Polling"
+ha_release: 0.68
+---
+
+To get your [wirelesstag.net](http://wirelesstag.net) switches working within Home Assistant, please follow the instructions for the general [WirelessTag component](/components/wirelesstag).
+
+To enable tags set up with your [wirelesstag.net](http://wirelesstag.net) account, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+switch:
+  - platform: wirelesstag
+    monitored_conditions:
+      - motion
+      - humidity
+```
+
+{% configuration %}
+  monitored_conditions:
+    description: The metrics types to control; valid values are specified below
+    required: true
+    type: list
+{% endconfiguration %}
+
+The following metrics can be controlled:
+
+* (`temperature`): Control arm/disarm temperature monitoring.
+* (`humidity`): Control arm/disarm humidity monitoring.
+* (`motion`): Control arm/disarm motion and door open/close events monitoring.
+* (`light`): Control monitoring of light changes.
+* (`moisture`): Control monitoring of water level/soil moisture for water sensor.
+
+Arm/Disarm of motion switch is required to receive motion and door binary sensors events.
+Others are only needed if you want to receive push notifications from tags on a specific range of changes in temperature, humidity, light or moisture.
diff --git a/source/_components/wirelesstag.markdown b/source/_components/wirelesstag.markdown
new file mode 100644
index 00000000000..d4e229d4a16
--- /dev/null
+++ b/source/_components/wirelesstag.markdown
@@ -0,0 +1,47 @@
+---
+layout: page
+title: "WirelessTag"
+description: "Instructions on how to integrate your Wireless Tags sensors within Home Assistant."
+date: 2018-03-26 21:32
+comments: false
+sidebar: true
+sharing: true
+footer: true
+logo: wirelesstag.png
+ha_category: Hub
+ha_iot_class: "Local Push and Cloud Polling"
+ha_release: 0.68
+---
+
+The `wirelesstag` implementation allows you to integrate your [wirelesstag.net](http://wirelesstag.net) sensors tags in Home Assistant.
+
+To enable tags set up with your [wirelesstag.net](http://wirelesstag.net) account, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+wirelesstag:
+  username: you@example.com
+  password: secret
+```
+
+{% configuration %}
+  username:
+    description: Username for your [wirelesstag.net](http://wirelesstag.net) account.
+    required: true
+    type: string
+  password:
+    description: Password for your [wirelesstag.net](http://wirelesstag.net) account.
+    required: true
+    type: string
+{% endconfiguration %}
+
+Finish your configuration by visiting the [WirelessTag binary sensor](/components/binary_sensor.wirelesstag/), [WirelessTag sensor](/components/sensor.wirelesstag/), or [WirelessTag switch](/components/switch.wirelesstag/) documentation.
+
+<p class='note'>
+  To enable local push notifications from the Tags Manager, you need to add the IP address of the Tags Manager into whitelist in `http` component; i.e., add it to `trusted_networks`. See the [HTTP](/components/http/) for details.
+  Additionally, you need add at least one [WirelessTag binary sensor](/components/binary_sensor.wirelesstag/) in config to start receiving local push notifications.
+</p>
+
+<p class='note warning'>
+  Tags Manager supports local push notifications for `http` schema only. So if your hass uses `https`, local push notifications are disabled and data is received via cloud polling.
+</p>
\ No newline at end of file
diff --git a/source/images/supported_brands/wirelesstag.png b/source/images/supported_brands/wirelesstag.png
new file mode 100644
index 00000000000..42f5ac48d59
Binary files /dev/null and b/source/images/supported_brands/wirelesstag.png differ