Addition of flipr hub with switch and select platform (#34586)

* Addition of flipr hub with switch platform

* addition of select platform for flipr hub

* tiny tweak

* Review correction

* tiny tweaks

* tiny tweaks

---------

Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>

source/_integrations/flipr.markdown

@@ -11,24 +11,20 @@ ha_codeowners:
 ha_domain: flipr
 ha_platforms:
   - binary_sensor
+  - select
   - sensor
+  - switch
 ha_integration_type: integration
 ---
 
-[Flipr](https://www.goflipr.com) is a smart pool monitor that publishes data to the cloud via SigFox.
+[Go flipr](https://www.goflipr.com) company sells smart pool monitor and management devices. The Flipr and Flipr Hub devices publish data to the cloud via Wi-Fi and SigFox.
-Flipr sends data like pH, chlorine or temperature to a cloud server on a regular basis in order to monitor your pool.
+This {% term integration %} gives you access on Home Assistant to the information measured by your Flipr with the same data as the vendor's smartphone application.
-This integration gives you access to this information on Home Assistant in addition to the vendor's smartphone application.
+This {% term integration %} gives you also access to the Flipr Hub to control your pool equipments like pump, heater, light, etc.
 
-There is currently support for the following information within Home Assistant:
+There is currently support for the following device types within Home Assistant:
 
-- Chlorine Level
+- [Flipr](#flipr)
-- pH
+- [Hub](#hub)
-- Water Temperature
-- Red OX Level
-- Last measure date
-- pH Status Indicator
-- Chlorine Status Indicator
-- Battery Level
 
 ## Prerequisites
 
@@ -39,6 +35,39 @@ You will need to use the standalone app for this device to register a username a
 
 {% include integrations/config_flow.md %}
 
+## Flipr
+
+Flipr sends data like pH, chlorine or temperature to a cloud server on a regular basis in order to monitor your pool.
+
+There is currently support for the following information within Home Assistant via **sensors** and **binary_sensors** :
+
+## Entities
+
+### Sensors
+
+- **Chlorine**: the chlorine level
+- **pH**: the pH level of the water
+- **Water temperature**: the temperature of the water
+- **Red OX**: the redox level of the water in mV
+- **Last measure date**: the date of the last measure taken by the flipr
+- **Battery level**: the battery level of the flipr in percentage
+
+### Binary sensors
+
+- **pH Status**: an indicator if the pH level is normal, too low, or too high
+- **Chlorine status**: an indicator if the chlorine level is normal, too low, or too high
+
+## Hub
+
+The Hub lets you handle your equipment (pump, heater, light, etc.) from Home Assistant and all of the automation you can imagine.
+
+- **Turn on/off** the switch inside the Hub and automatically set the Hub in manual mode.
+- **Choose** the mode of the Hub between auto, planning and manual.
+
+## Actions
+
+The cloud data is polled every 15 minutes. If you want to force a refresh of the data, you can use the `homeassistant.update_entity` action.
+
 ## Tips
 
 It is recommended that you create your own card with the following sensors where \[fliprid\] is the id of your flipr: