mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-19 07:17:14 +00:00
typo / grammar fixes for zwave (#3717)
This commit is contained in:
parent
433b884356
commit
23f9641572
@ -16,17 +16,16 @@ zwave:
|
|||||||
usb_path: /dev/ttyACM0
|
usb_path: /dev/ttyACM0
|
||||||
```
|
```
|
||||||
|
|
||||||
If you need GPIO on raspberry-pi3 for you Z-Wave module add follow line into `config.txt`:
|
If you need GPIO on raspberry-pi3 for your Z-Wave module, add the following line into `config.txt`:
|
||||||
```
|
```
|
||||||
dtoverlay=pi3-miniuart-bt
|
dtoverlay=pi3-miniuart-bt
|
||||||
```
|
```
|
||||||
|
|
||||||
For some exceptional devices, the `/dev/ttyAMA0` will not be detected by udev and are therefor not mapped with docker.
|
For some devices the `/dev/ttyAMA0` device is not detected by udev and is therefore not mapped by Docker. To explicitly set this device for mapping to Home-Assistant, execute the following command using the ssh add-on:
|
||||||
So you need explicit set this device for mapping to Home-Assistant. Execute this command on ssh add-on:
|
|
||||||
```bash
|
```bash
|
||||||
$ curl -d '{"devices": ["ttyAMA0"]}' http://hassio/homeassistant/options
|
$ curl -d '{"devices": ["ttyAMA0"]}' http://hassio/homeassistant/options
|
||||||
```
|
```
|
||||||
After that, you need change `usb_path` to `/dev/ttyAMA0`.
|
After that, you need to change `usb_path` to `/dev/ttyAMA0`.
|
||||||
|
|
||||||
### HUSBZB-1:
|
### HUSBZB-1:
|
||||||
```yaml
|
```yaml
|
||||||
|
Loading…
x
Reference in New Issue
Block a user