diff --git a/source/_integrations/zha.markdown b/source/_integrations/zha.markdown index b42998f555c..d62517ae1dc 100644 --- a/source/_integrations/zha.markdown +++ b/source/_integrations/zha.markdown @@ -460,7 +460,7 @@ Using a Philips Hue Dimmer Switch or Lutron Connected Bulb Remote is probably th 1. Turn on your Hue bulb/light you want to reset. (It is important that the bulb has just been turned). 2. Hold the Philips Hue Dimmer Switch near your bulb (closer than 10 centimeters / 4 inches). 3. Press and hold the (I)/(ON) and (O)/(OFF) buttons on the Philips Hue Dimmer Switch. The bulb should start blinking in 10-20 seconds. The bulb will blink, then turn off, then turn on. You can now release the dimmer buttons. -4. Your bulb is now factor resey and ready for pairing. A green light on the top left of the dimmer remote indicates that your bulb has been successfully reset to factory default settings. +4. Your bulb is now factor reset and ready for pairing. A green light on the top left of the dimmer remote indicates that your bulb has been successfully reset to factory default settings. Note: If you are unable to reset the bulb, remove it from the Hue Bridge and retry the procedure.