Fixed markdown and added logo (#551)

This commit is contained in:
Jacob Tomlinson 2016-06-12 12:23:31 +01:00 committed by Fabian Affolter
parent 35b2c34c9d
commit 2764b4bc3d
5 changed files with 22 additions and 18 deletions

View File

@ -7,6 +7,7 @@ sidebar: true
comments: false
sharing: true
footer: true
logo: rfxtrx.png
ha_category: Light
ha_release: 0.7.5
---
@ -29,14 +30,14 @@ Push your remote and your device should be added:
<img src='/images/components/rfxtrx/switch.png' />
</p>
Here the name is 0b11000102ef9f210010f70 and you can verify that it works from the frontend.
Here the name is 0b11000102ef9f210010f70 and you can verify that it works from the frontend.
Then you should update your configuration to:
```yaml
light:
platform: rfxtrx
devices:
0b11000102ef9f210010f70:
0b11000102ef9f210010f70:
name: device_name
```

View File

@ -7,6 +7,7 @@ sidebar: true
comments: false
sharing: true
footer: true
logo: rfxtrx.png
ha_category: Hub
ha_release: pre 0.7
---

View File

@ -2,11 +2,12 @@
layout: page
title: "RFXtrx Rollershutter"
description: "Instructions how to integrate RFXtrx roller shutters into Home Assistant."
date: 2016-06-02 22:10
date: 2016-06-11 22:40
sidebar: true
comments: false
sharing: true
footer: true
logo: rfxtrx.png
ha_category: Rollershutter
ha_release: 0.21
---
@ -30,6 +31,7 @@ Push your remote and your device should be added.
Once added it will show an id (e.g `0b11000102ef9f210010f70`) and you can verify that it works from the frontend.
Then you should update your configuration to:
```yaml
rollershutter:
platform: rfxtrx
@ -38,8 +40,8 @@ rollershutter:
name: device_name
```
#####RFY
The RFXtrx433e is required for RFY support, however it does not support receive for the RFY protocol - as such devices cannot be automatically added. Instead, configure the device in the [rfxmngr](http://www.rfxcom.com/downloads.htm) tool. Make a note of the assigned ID and Unit Code and then add a device to the configuration with the following id `071a0000[id][unit_code]`. Eg, if the id was `a` (`0a`) `00` `01`, and the unit code was `1` (`01`) then the fully qualified id would be `071a00000a000101`.
##### RFY
The RFXtrx433e is required for RFY support, however it does not support receive for the RFY protocol - as such devices cannot be automatically added. Instead, configure the device in the [rfxmngr](http://www.rfxcom.com/downloads.htm) tool. Make a note of the assigned ID and Unit Code and then add a device to the configuration with the following id `071a0000[id][unit_code]`. Eg, if the id was `0a` `00` `01`, and the unit code was `01` then the fully qualified id would be `071a00000a000101`.
#####Common
@ -64,4 +66,3 @@ Configuration variables:
- **automatic_add** (*Optional*): To enable the automatic addition of new roller shutters (Siemens/LightwaveRF only).
- **signal_repetitions** *Optional*: Because the rxftrx device sends its actions via radio and from most receivers it's impossible to know if the signal was received or not. Therefore you can configure the roller shutter to try to send each signal repeatedly.
- **fire_event** *Optional*: Fires an event even if the state is the same as before. Can be used for automations.

View File

@ -7,6 +7,7 @@ sidebar: true
comments: false
sharing: true
footer: true
logo: rfxtrx.png
ha_category: Sensor
---
@ -16,7 +17,7 @@ First you have to set up your [rfxtrx hub.](/components/rfxtrx/)
The easiest way to find your sensors is to add this to your `configuration.yaml`:
```yaml
sensor:
sensor:
platform: rfxtrx
automatic_add: True
```
@ -27,26 +28,26 @@ Then when the sensor emits a signal it will be automatically added:
<img src='/images/components/rfxtrx/sensor.png' />
</p>
Here the name is 0a52080000301004d240259 and you can verify that it works from the frontend.
Here the name is 0a52080000301004d240259 and you can verify that it works from the frontend.
Then you should update your configuration to:
```yaml
sensor:
platform: rfxtrx
devices:
0a52080000301004d240259:
0a52080000301004d240259:
name: device_name
```
If you want to display several data types from one sensor:
```yaml
sensor:
sensor:
platform: rfxtrx
devices:
0a520802060100ff0e0269:
0a520802060100ff0e0269:
name: Bath
data_type:
data_type:
- Humidity
- Temperature
```
@ -57,7 +58,7 @@ Example configuration:
```yaml
# Example configuration.yaml entry
sensor:
sensor:
platform: rfxtrx
automatic_add: True
devices:
@ -65,7 +66,7 @@ sensor:
name: Lving
0a520802060100ff0e0269:
name: Bath
data_type:
data_type:
- Humidity
- Temperature
```
@ -75,4 +76,3 @@ Configuration variables:
- **devices** (*Optional*): A list of devices with their name to use in the frontend.
- **automatic_add** (*Optional*): To enable the automatic addition of new lights.
- **data_type** (*Optional*): Which data type the sensor should show

View File

@ -7,6 +7,7 @@ sidebar: true
comments: false
sharing: true
footer: true
logo: rfxtrx.png
ha_category: Switch
ha_release: 0.7.5
---
@ -29,14 +30,14 @@ Push your remote and your device should be added:
<img src='/images/components/rfxtrx/switch.png' />
</p>
Here the name is 0b11000102ef9f210010f70 and you can verify that it works from the frontend.
Here the name is 0b11000102ef9f210010f70 and you can verify that it works from the frontend.
Then you should update your configuration to:
```yaml
switch:
platform: rfxtrx
devices:
0b11000102ef9f210010f70:
0b11000102ef9f210010f70:
name: device_name
```
@ -44,7 +45,7 @@ Example configuration:
```yaml
# Example configuration.yaml entry
switch:
switch:
platform: rfxtrx
automatic_add: False
signal_repetitions: 2