Merge branch 'next' into feature/openai-conversion-service

CODEOWNERS

@@ -33,8 +33,8 @@ source/_integrations/airvisual.markdown @bachya
 source/_integrations/airvisual_pro.markdown @bachya
 source/_integrations/airzone.markdown @Noltari
 source/_integrations/airzone_cloud.markdown @Noltari
-source/_integrations/aladdin_connect.markdown @swcloudgenie
 source/_integrations/alarm_control_panel.markdown @home-assistant/core
+source/_integrations/alarm_control_panel.template.markdown @home-assistant/core
 source/_integrations/alert.markdown @home-assistant/core @frenck
 source/_integrations/alexa.markdown @home-assistant/cloud @ochlocracy @jbouwh
 source/_integrations/alexa.smart_home.markdown @home-assistant/cloud @ochlocracy @jbouwh
@@ -80,6 +80,7 @@ source/_integrations/august_ble.markdown @bdraco
 source/_integrations/aurora.markdown @djtimca
 source/_integrations/aurora_abb_powerone.markdown @davet2001
 source/_integrations/aussie_broadband.markdown @nickw444 @Bre77
+source/_integrations/autarco.markdown @klaasnicolaas
 source/_integrations/auth.markdown @home-assistant/core
 source/_integrations/automation.markdown @home-assistant/core
 source/_integrations/avea.markdown @pattyland
@@ -105,13 +106,13 @@ source/_integrations/bloc_blinds.markdown @starkillerOG
 source/_integrations/blue_current.markdown @Floris272 @gleeuwen
 source/_integrations/bluemaestro.markdown @bdraco
 source/_integrations/blueprint.markdown @home-assistant/core
-source/_integrations/bluesound.markdown @thrawnarn
+source/_integrations/bluesound.markdown @thrawnarn @LouisChrist
 source/_integrations/bluetooth.markdown @bdraco
 source/_integrations/bluetooth_adapters.markdown @bdraco
 source/_integrations/bmw_connected_drive.markdown @gerard33 @rikroe
 source/_integrations/bond.markdown @bdraco @prystupa @joshs85 @marciogranzotto
 source/_integrations/bosch_shc.markdown @tschamm
-source/_integrations/brandt.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/brandt.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/braviatv.markdown @bieniu @Drafteed
 source/_integrations/brel_home.markdown @starkillerOG
 source/_integrations/bring.markdown @miaucl @tr4nt0r
@@ -119,6 +120,7 @@ source/_integrations/broadlink.markdown @danielhiversen @felipediel @L-I-Am @eif
 source/_integrations/brother.markdown @bieniu
 source/_integrations/brottsplatskartan.markdown @gjohansson-ST
 source/_integrations/brunt.markdown @eavanvalkenburg
+source/_integrations/bryant_evolution.markdown @danielsmyers
 source/_integrations/bsblan.markdown @liudger
 source/_integrations/bswitch.markdown @jafar-atili
 source/_integrations/bt_smarthub.markdown @typhoon2099
@@ -132,6 +134,7 @@ source/_integrations/camera.markdown @home-assistant/core
 source/_integrations/cast.markdown @emontnemery
 source/_integrations/ccm15.markdown @ocalvo
 source/_integrations/cert_expiry.markdown @jjlawren
+source/_integrations/chacon_dio.markdown @cnico
 source/_integrations/cisco_ios.markdown @fbradyirl
 source/_integrations/cisco_mobility_express.markdown @fbradyirl
 source/_integrations/cisco_webex_teams.markdown @fbradyirl
@@ -155,7 +158,8 @@ source/_integrations/conversation.markdown @home-assistant/core @synesthesiam
 source/_integrations/coolmaster.markdown @OnFreund
 source/_integrations/counter.markdown @fabaff
 source/_integrations/cover.markdown @home-assistant/core
-source/_integrations/cozytouch.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/cover.template.markdown @home-assistant/core
+source/_integrations/cozytouch.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/cpuspeed.markdown @fabaff
 source/_integrations/cribl.markdown @Bre77
 source/_integrations/crownstone.markdown @Crownstone @RicArch97
@@ -207,7 +211,7 @@ source/_integrations/eastron.markdown @DCSBL
 source/_integrations/easyenergy.markdown @klaasnicolaas
 source/_integrations/ecoforest.markdown @pjanuario
 source/_integrations/econet.markdown @w1ll1am23
-source/_integrations/ecovacs.markdown @OverloadUT @mib1185 @edenhaus @Augar
+source/_integrations/ecovacs.markdown @mib1185 @edenhaus @Augar
 source/_integrations/ecowitt.markdown @pvizeli
 source/_integrations/efergy.markdown @tkdrob
 source/_integrations/egardia.markdown @jeroenterheerdt
@@ -230,7 +234,7 @@ source/_integrations/energyzero.markdown @klaasnicolaas
 source/_integrations/enigma2.markdown @autinerd
 source/_integrations/enmax.markdown @tronikos
 source/_integrations/enocean.markdown @bdurrer
-source/_integrations/enphase_envoy.markdown @bdraco @cgarwood @dgomes @joostlek @catsmanac
+source/_integrations/enphase_envoy.markdown @bdraco @cgarwood @joostlek @catsmanac
 source/_integrations/entur_public_transport.markdown @hfurubotten
 source/_integrations/environment_canada.markdown @gwww @michaeldavie
 source/_integrations/ephember.markdown @ttroy50
@@ -249,7 +253,9 @@ source/_integrations/evohome.markdown @zxdavb
 source/_integrations/ezviz.markdown @RenierM26 @baqs
 source/_integrations/faa_delays.markdown @ntilley905
 source/_integrations/fan.markdown @home-assistant/core
+source/_integrations/fan.template.markdown @home-assistant/core
 source/_integrations/fastdotcom.markdown @rohankapoorcom @erwindouna
+source/_integrations/feedreader.markdown @mib1185
 source/_integrations/fibaro.markdown @rappenze
 source/_integrations/file.markdown @fabaff
 source/_integrations/file_upload.markdown @home-assistant/core
@@ -262,7 +268,7 @@ source/_integrations/fitbit.markdown @allenporter
 source/_integrations/fivem.markdown @Sander0542
 source/_integrations/fjaraskupan.markdown @elupus
 source/_integrations/flexit_bacnet.markdown @lellky @piotrbulinski
-source/_integrations/flexom.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/flexom.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/flick_electric.markdown @ZephireNZ
 source/_integrations/flipr.markdown @cnico
 source/_integrations/flo.markdown @dmulcahey
@@ -328,8 +334,8 @@ source/_integrations/heatmiser.markdown @andylockran
 source/_integrations/heiwa.markdown @cmroche
 source/_integrations/heos.markdown @andrewsayre
 source/_integrations/here_travel_time.markdown @eifinger
-source/_integrations/hexaom.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
-source/_integrations/hi_kumo.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/hexaom.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
+source/_integrations/hi_kumo.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/hikvision.markdown @mezz64
 source/_integrations/hikvisioncam.markdown @fbradyirl
 source/_integrations/hisense_aehw4a1.markdown @bannhead
@@ -394,13 +400,16 @@ source/_integrations/intellifire.markdown @jeeftor
 source/_integrations/intesishome.markdown @jnimmo
 source/_integrations/ios.markdown @robbiet480
 source/_integrations/iotawatt.markdown @gtdiehl @jyavenard
+source/_integrations/iotty.markdown @pburgio
 source/_integrations/iperf3.markdown @rohankapoorcom
 source/_integrations/ipma.markdown @dgomes
 source/_integrations/iqvia.markdown @bachya
 source/_integrations/irish_rail_transport.markdown @ttroy50
+source/_integrations/iron_os.markdown @tr4nt0r
 source/_integrations/isal.markdown @bdraco
 source/_integrations/islamic_prayer_times.markdown @engrbm87 @cpfair
 source/_integrations/ismartwindow.markdown @starkillerOG
+source/_integrations/israel_rail.markdown @shaiu
 source/_integrations/iss.markdown @DurgNomis-drol
 source/_integrations/ista_ecotrend.markdown @tr4nt0r
 source/_integrations/isy994.markdown @bdraco @shbatm
@@ -421,7 +430,7 @@ source/_integrations/keyboard_remote.markdown @bendavid @lanrat
 source/_integrations/keymitt_ble.markdown @spycle
 source/_integrations/kitchen_sink.markdown @home-assistant/core
 source/_integrations/kmtronic.markdown @dgomes
-source/_integrations/knocki.markdown @joostlek @jgatto1
+source/_integrations/knocki.markdown @joostlek @jgatto1 @JakeBosh
 source/_integrations/knx.markdown @Julius2342 @farmio @marvin-w
 source/_integrations/kodi.markdown @OnFreund
 source/_integrations/konnected.markdown @heythisisnate
@@ -445,7 +454,9 @@ source/_integrations/legrand.markdown @cgtobi
 source/_integrations/leviton_z_wave.markdown @home-assistant/z-wave
 source/_integrations/lg_netcast.markdown @Drafteed @splinter98
 source/_integrations/lidarr.markdown @tkdrob
+source/_integrations/lifx.markdown @Djelibeybi
 source/_integrations/light.markdown @home-assistant/core
+source/_integrations/light.template.markdown @home-assistant/core
 source/_integrations/linear_garage_door.markdown @IceBotYT
 source/_integrations/linux_battery.markdown @fabaff
 source/_integrations/litejet.markdown @joncar
@@ -455,6 +466,7 @@ source/_integrations/local_calendar.markdown @allenporter
 source/_integrations/local_ip.markdown @issacg
 source/_integrations/local_todo.markdown @allenporter
 source/_integrations/lock.markdown @home-assistant/core
+source/_integrations/lock.template.markdown @home-assistant/core
 source/_integrations/logbook.markdown @home-assistant/core
 source/_integrations/logger.markdown @home-assistant/core
 source/_integrations/london_underground.markdown @jpbede
@@ -468,6 +480,7 @@ source/_integrations/lutron_caseta.markdown @swails @bdraco @danaues @eclair4151
 source/_integrations/luxaflex.markdown @bdraco @kingy444 @trullock
 source/_integrations/lyric.markdown @timmo001
 source/_integrations/madeco.markdown @starkillerOG
+source/_integrations/madvr.markdown @iloveicedgreentea
 source/_integrations/marantz.markdown @ol-iver @starkillerOG
 source/_integrations/martec.markdown @starkillerOG
 source/_integrations/mastodon.markdown @fabaff @andrew-codechimp
@@ -483,6 +496,7 @@ source/_integrations/mediaroom.markdown @dgomes
 source/_integrations/melcloud.markdown @erwindouna
 source/_integrations/melissa.markdown @kennedyshead
 source/_integrations/melnor.markdown @vanstinator
+source/_integrations/mercury_nz.markdown @tronikos
 source/_integrations/met.markdown @danielhiversen
 source/_integrations/met_eireann.markdown @DylanGore
 source/_integrations/meteo_france.markdown @hacf-fr @oncleben31 @Quentame
@@ -495,10 +509,10 @@ source/_integrations/mikrotik.markdown @engrbm87
 source/_integrations/mill.markdown @danielhiversen
 source/_integrations/min_max.markdown @gjohansson-ST
 source/_integrations/minecraft_server.markdown @elmurato
+source/_integrations/mini_connected.markdown @gerard33 @rikroe
 source/_integrations/minio.markdown @tkislan
 source/_integrations/moat.markdown @bdraco
 source/_integrations/mobile_app.markdown @home-assistant/core
-source/_integrations/modbus.markdown @janiversen
 source/_integrations/modem_callerid.markdown @tkdrob
 source/_integrations/modern_forms.markdown @wonderslug
 source/_integrations/moehlenhoff_alpha2.markdown @j-a-n
@@ -530,7 +544,7 @@ source/_integrations/netgear.markdown @hacf-fr @Quentame @starkillerOG
 source/_integrations/netgear_lte.markdown @tkdrob
 source/_integrations/network.markdown @home-assistant/core
 source/_integrations/nexia.markdown @bdraco
-source/_integrations/nexity.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/nexity.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/nextbus.markdown @vividboarder
 source/_integrations/nextcloud.markdown @mib1185
 source/_integrations/nextdns.markdown @bieniu
@@ -561,7 +575,6 @@ source/_integrations/octoprint.markdown @rfleming71
 source/_integrations/ohmconnect.markdown @robbiet480
 source/_integrations/ollama.markdown @synesthesiam
 source/_integrations/ombi.markdown @larssont
-source/_integrations/omnilogic.markdown @oliver84 @djtimca @gentoosu
 source/_integrations/onboarding.markdown @home-assistant/core
 source/_integrations/oncue.markdown @bdraco @peterager
 source/_integrations/ondilo_ico.markdown @JeromeHXP
@@ -586,7 +599,7 @@ source/_integrations/oru_opower.markdown @tronikos
 source/_integrations/osoenergy.markdown @osohotwateriot
 source/_integrations/otbr.markdown @home-assistant/core
 source/_integrations/ourgroceries.markdown @OnFreund
-source/_integrations/overkiz.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/overkiz.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/ovo_energy.markdown @timmo001
 source/_integrations/p1_monitor.markdown @klaasnicolaas
 source/_integrations/panel_custom.markdown @home-assistant/frontend
@@ -602,6 +615,7 @@ source/_integrations/philips_js.markdown @elupus
 source/_integrations/pi_hole.markdown @shenxn
 source/_integrations/picnic.markdown @corneyl
 source/_integrations/pilight.markdown @trekky12
+source/_integrations/pinecil.markdown @tr4nt0r
 source/_integrations/ping.markdown @jpbede
 source/_integrations/piper.markdown @balloob @synesthesiam
 source/_integrations/plaato.markdown @JohNan
@@ -665,7 +679,7 @@ source/_integrations/reolink.markdown @starkillerOG
 source/_integrations/repairs.markdown @home-assistant/core
 source/_integrations/repetier.markdown @ShadowBr0ther
 source/_integrations/rest_command.markdown @jpbede
-source/_integrations/rexel.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/rexel.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/rflink.markdown @javicalle
 source/_integrations/rfxtrx.markdown @danielhiversen @elupus @RobBie1221
 source/_integrations/rhasspy.markdown @balloob @synesthesiam
@@ -683,6 +697,7 @@ source/_integrations/rpi_power.markdown @shenxn @swetoast
 source/_integrations/rss_feed_template.markdown @home-assistant/core
 source/_integrations/rtsp_to_webrtc.markdown @allenporter
 source/_integrations/ruckus_unleashed.markdown @lanrat @ms264556 @gabe565
+source/_integrations/russound_rio.markdown @noahhusby
 source/_integrations/ruuvi_gateway.markdown @akx
 source/_integrations/ruuvitag_ble.markdown @akx
 source/_integrations/rympro.markdown @OnFreund @elad-bar @maorcc
@@ -723,10 +738,11 @@ source/_integrations/shodan.markdown @fabaff
 source/_integrations/sia.markdown @eavanvalkenburg
 source/_integrations/sighthound.markdown @robmarkcole
 source/_integrations/signal_messenger.markdown @bbernhard
+source/_integrations/simplefin.markdown @scottg489 @jeeftor
 source/_integrations/simplepush.markdown @engrbm87
 source/_integrations/simplisafe.markdown @bachya
 source/_integrations/simply_automated.markdown @gwww
-source/_integrations/simu.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/simu.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/sinch.markdown @bendikrb
 source/_integrations/siren.markdown @home-assistant/core @raman325
 source/_integrations/sisyphus.markdown @jkeljo
@@ -755,7 +771,7 @@ source/_integrations/solaredge_local.markdown @drobtravels @scheric
 source/_integrations/solarlog.markdown @Ernst79 @dontinelli
 source/_integrations/solax.markdown @squishykid
 source/_integrations/soma.markdown @ratsept @sebfortier2288
-source/_integrations/somfy.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/somfy.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/sonarr.markdown @ctalkington
 source/_integrations/songpal.markdown @rytilahti @shenxn
 source/_integrations/sonos.markdown @jjlawren @peterager
@@ -788,6 +804,7 @@ source/_integrations/swepco.markdown @tronikos
 source/_integrations/swiss_hydrological_data.markdown @fabaff
 source/_integrations/swiss_public_transport.markdown @fabaff @miaucl
 source/_integrations/switch.markdown @home-assistant/core
+source/_integrations/switch.template.markdown @home-assistant/core
 source/_integrations/switch_as_x.markdown @home-assistant/core
 source/_integrations/switchbee.markdown @jafar-atili
 source/_integrations/switchbot.markdown @danielhiversen @RenierM26 @murtas @Eloston @dsypniewski
@@ -814,6 +831,7 @@ source/_integrations/technove.markdown @Moustachauve
 source/_integrations/tedee.markdown @patrickhilker @zweckj
 source/_integrations/tellduslive.markdown @fredrike
 source/_integrations/template.markdown @PhracturedBlue @tetienne @home-assistant/core
+source/_integrations/tesla_fleet.markdown @Bre77
 source/_integrations/tesla_wall_connector.markdown @einarhauks
 source/_integrations/teslemetry.markdown @Bre77
 source/_integrations/tessie.markdown @Bre77
@@ -852,7 +870,7 @@ source/_integrations/tuya.markdown @Tuya @zlinoliver @frenck
 source/_integrations/twentemilieu.markdown @frenck
 source/_integrations/twinkly.markdown @dr1rrb @Robbie1221 @Olen
 source/_integrations/twitch.markdown @joostlek
-source/_integrations/ubiwizz.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117
+source/_integrations/ubiwizz.markdown @imicknl @vlebourl @tetienne @nyroDev @tronix117 @alexfp14
 source/_integrations/ukraine_alarm.markdown @PaulAnnekov
 source/_integrations/unifi.markdown @Kane610
 source/_integrations/unifi_direct.markdown @tofuSCHNITZEL
@@ -870,6 +888,7 @@ source/_integrations/usgs_earthquakes_feed.markdown @exxamalte
 source/_integrations/utility_meter.markdown @dgomes
 source/_integrations/v2c.markdown @dgomes
 source/_integrations/vacuum.markdown @home-assistant/core
+source/_integrations/vacuum.template.markdown @home-assistant/core
 source/_integrations/vallox.markdown @andre-richter @slovdahl @viiru- @yozik04
 source/_integrations/valve.markdown @home-assistant/core
 source/_integrations/velbus.markdown @Cereal2nd @brefra
@@ -899,6 +918,7 @@ source/_integrations/watson_tts.markdown @rutkai
 source/_integrations/watttime.markdown @bachya
 source/_integrations/waze_travel_time.markdown @eifinger
 source/_integrations/weather.markdown @home-assistant/core
+source/_integrations/weather.template.markdown @home-assistant/core
 source/_integrations/weatherflow.markdown @natekspencer @jeeftor
 source/_integrations/weatherflow_cloud.markdown @jeeftor
 source/_integrations/weatherkit.markdown @tjhorner

Gemfile

@@ -10,8 +10,8 @@ group :development do
   gem 'stringex', '2.8.6'
   # > 2.1.0 causes slowdowns https://github.com/sass/sassc-ruby/issues/189
   gem 'sassc', '2.1.0'
-  gem 'rubocop', '1.65.0'
-  gem 'ruby-lsp', '0.17.10'
+  gem 'rubocop', '1.65.1'
+  gem 'ruby-lsp', '0.17.11'
   gem 'rackup', '2.1.0'
 end
 

Gemfile.lock

@@ -28,7 +28,7 @@ GEM
     eventmachine (1.2.7)
     ffi (1.17.0-x86_64-linux-gnu)
     forwardable-extended (2.6.0)
-    google-protobuf (4.27.2-x86_64-linux)
+    google-protobuf (4.27.3-x86_64-linux)
       bigdecimal
       rake (>= 13)
     http_parser.rb (0.8.0)
@@ -75,12 +75,12 @@ GEM
     logger (1.6.0)
     mercenary (0.4.0)
     multi_json (1.15.0)
-    mustermann (3.0.0)
+    mustermann (3.0.1)
       ruby2_keywords (~> 0.0.1)
     nokogiri (1.16.7-x86_64-linux)
       racc (~> 1.4)
     parallel (1.25.1)
-    parser (3.3.4.0)
+    parser (3.3.4.1)
       ast (~> 2.4.1)
       racc
     pathutil (0.16.2)
@@ -105,10 +105,10 @@ GEM
     rbs (3.5.2)
       logger
     regexp_parser (2.9.2)
-    rexml (3.3.2)
+    rexml (3.3.4)
       strscan
     rouge (4.3.0)
-    rubocop (1.65.0)
+    rubocop (1.65.1)
       json (~> 2.3)
       language_server-protocol (>= 3.17.0)
       parallel (~> 1.10)
@@ -119,9 +119,9 @@ GEM
       rubocop-ast (>= 1.31.1, < 2.0)
       ruby-progressbar (~> 1.7)
       unicode-display_width (>= 2.4.0, < 3.0)
-    rubocop-ast (1.31.3)
+    rubocop-ast (1.32.0)
       parser (>= 3.3.1.0)
-    ruby-lsp (0.17.10)
+    ruby-lsp (0.17.11)
       language_server-protocol (~> 3.17.0)
       prism (>= 0.29.0, < 0.31)
       rbs (>= 3, < 4)
@@ -142,7 +142,7 @@ GEM
       rack-protection (= 4.0.0)
       rack-session (>= 2.0.0, < 3)
       tilt (~> 2.0)
-    sorbet-runtime (0.5.11501)
+    sorbet-runtime (0.5.11514)
     stringex (2.8.6)
     strscan (3.1.0)
     terminal-table (3.0.2)
@@ -168,8 +168,8 @@ DEPENDENCIES
   nokogiri (= 1.16.7)
   rackup (= 2.1.0)
   rake (= 13.2.1)
-  rubocop (= 1.65.0)
-  ruby-lsp (= 0.17.10)
+  rubocop (= 1.65.1)
+  ruby-lsp (= 0.17.11)
   sass-globbing (= 1.1.5)
   sassc (= 2.1.0)
   sinatra (= 4.0.0)

_config.yml

@@ -107,9 +107,9 @@ social:
 
 # Home Assistant release details
 current_major_version: 2024
-current_minor_version: 7
-current_patch_version: 4
-date_released: 2024-07-30
+current_minor_version: 8
+current_patch_version: 0
+date_released: 2024-08-07
 
 # Either # or the anchor link to latest release notes in the blog post.
 # Must be prefixed with a # and have double quotes around it.

package-lock.json

@@ -20,7 +20,7 @@
         "remark-lint-prohibited-strings": "^4.0.0",
         "remark-lint-unordered-list-marker-style": "^4.0.0",
         "remark-stringify": "^11.0.0",
-        "textlint": "^14.0.4",
+        "textlint": "^14.0.5",
         "textlint-filter-rule-comments": "^1.2.2",
         "textlint-rule-common-misspellings": "^1.0.1",
         "textlint-rule-terminology": "^5.0.13"
@@ -416,65 +416,65 @@
       "dev": true
     },
     "node_modules/@textlint/ast-tester": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-tester/-/ast-tester-14.0.4.tgz",
-      "integrity": "sha512-SQ/2DjxVlDVeCEjVlD8c8R2Sl3VGDZEx8o9+i8bV8NUdY8qsSHbo29/BfiUZf/uaX6eeNpZsurtstJ25hbVrsQ==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-tester/-/ast-tester-14.0.5.tgz",
+      "integrity": "sha512-fXIffKbOXwULZwMib9BtGf+IkARXs/CnEmFhAGwLhzPjLTB9YgNftjTyxmVvNbpKA02KTMdK3JFpgZ5Vyxsykg==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4",
+        "@textlint/ast-node-types": "^14.0.5",
         "debug": "^4.3.4"
       }
     },
     "node_modules/@textlint/ast-tester/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/@textlint/ast-traverse": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-traverse/-/ast-traverse-14.0.4.tgz",
-      "integrity": "sha512-bzFC7UJ2FvhjH5ekXGQ0i9vjK+xzMT69gHBsYVEl+TtbplnH2YY3+sbw6B1j3LocJuo6xngZ2YWXXqmQlKgzLg==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-traverse/-/ast-traverse-14.0.5.tgz",
+      "integrity": "sha512-5q/7vifbG8mqDEpByaUjAfHHjJlFiS737axziNQ8qXVswyrMdmRIRE9Wv0unvrs0W9mLKHcsPHh8JQd1RGpfIg==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4"
+        "@textlint/ast-node-types": "^14.0.5"
       }
     },
     "node_modules/@textlint/ast-traverse/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/@textlint/config-loader": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/config-loader/-/config-loader-14.0.4.tgz",
-      "integrity": "sha512-qgAvZ1RcTq58+yNbzhaKHsb52yHRxt8SRpG7S4WFjYj2DEStjIxzssSQvlZtEBjSUQ7RZNJ93d+pL0YK8MIVoA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/config-loader/-/config-loader-14.0.5.tgz",
+      "integrity": "sha512-nZZGwXei1kizl8+3uvahfHcMg2npMnuE2WWQ8z8c8seNsnHLitoTNoSR8IQYZ0XDQ9Iy3ROOkRX2qUvKCQPgQQ==",
       "dev": true,
       "dependencies": {
-        "@textlint/kernel": "^14.0.4",
-        "@textlint/module-interop": "^14.0.4",
-        "@textlint/types": "^14.0.4",
-        "@textlint/utils": "^14.0.4",
+        "@textlint/kernel": "^14.0.5",
+        "@textlint/module-interop": "^14.0.5",
+        "@textlint/types": "^14.0.5",
+        "@textlint/utils": "^14.0.5",
         "debug": "^4.3.4",
         "rc-config-loader": "^4.1.3",
         "try-resolve": "^1.0.1"
       }
     },
     "node_modules/@textlint/feature-flag": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/feature-flag/-/feature-flag-14.0.4.tgz",
-      "integrity": "sha512-1FMZqnjOA4KVpt/aloI1fNs46P0rUeHWcCRKl33/08wRHHMdcbaN4EsHkq7UfriuSfFgUuiyeo0bPjCpv15hhQ==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/feature-flag/-/feature-flag-14.0.5.tgz",
+      "integrity": "sha512-hTlCE+cyJ6BxsXgDJfe/mF/b/GVKrPUMzgqbd6n5bbGuhdTYO0hDrl/nCAbasQz4oJh6TGq4WH2dNts38TlZng==",
       "dev": true
     },
     "node_modules/@textlint/fixer-formatter": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/fixer-formatter/-/fixer-formatter-14.0.4.tgz",
-      "integrity": "sha512-HkMxzGPo/pgA9UvddqJG6qm62ICNgil3AmBVp0QpOv5uTV1u9gCSQ5jOdb/aOJBw7W8fd+CcnEsEBYn9HT8e6A==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/fixer-formatter/-/fixer-formatter-14.0.5.tgz",
+      "integrity": "sha512-fRXWUQVBbg4Gp2k254YLbEzn42GwBcmAmRUODSJkXkF8oAu91uEQJ6uJlOE0/plQfZUOgQebco9KPmeL8+Jb+A==",
       "dev": true,
       "dependencies": {
-        "@textlint/module-interop": "^14.0.4",
-        "@textlint/types": "^14.0.4",
+        "@textlint/module-interop": "^14.0.5",
+        "@textlint/types": "^14.0.5",
         "chalk": "^4.1.2",
         "debug": "^4.3.4",
         "diff": "^5.2.0",
@@ -485,39 +485,39 @@
       }
     },
     "node_modules/@textlint/kernel": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/kernel/-/kernel-14.0.4.tgz",
-      "integrity": "sha512-6WNoEBZ4lYTYOGK4EEEdjp+kgxSSC1nIFwN6tY9XGVkd4OACzDNothVTvJBwaX73FWFG5zoSjnNQxBDPUHMc8g==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/kernel/-/kernel-14.0.5.tgz",
+      "integrity": "sha512-AfCGRSq4XuH1UCAcKKurbBRxxypTJzdWmG3Netpa/cGmkdI4tcL+kfaimG3hSnXvQfv6VIzHASBB6u2WpUAGXg==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4",
-        "@textlint/ast-tester": "^14.0.4",
-        "@textlint/ast-traverse": "^14.0.4",
-        "@textlint/feature-flag": "^14.0.4",
-        "@textlint/source-code-fixer": "^14.0.4",
-        "@textlint/types": "^14.0.4",
-        "@textlint/utils": "^14.0.4",
+        "@textlint/ast-node-types": "^14.0.5",
+        "@textlint/ast-tester": "^14.0.5",
+        "@textlint/ast-traverse": "^14.0.5",
+        "@textlint/feature-flag": "^14.0.5",
+        "@textlint/source-code-fixer": "^14.0.5",
+        "@textlint/types": "^14.0.5",
+        "@textlint/utils": "^14.0.5",
         "debug": "^4.3.4",
         "fast-equals": "^4.0.3",
         "structured-source": "^4.0.0"
       }
     },
     "node_modules/@textlint/kernel/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/@textlint/linter-formatter": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/linter-formatter/-/linter-formatter-14.0.4.tgz",
-      "integrity": "sha512-EQZJPydExEIvBARkdmkoGsKWie1ekNAiqerQgIqwPb3SqOzKnlaDGrZOMy40HufTcacZrrvlbByDyai6m30+Lw==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/linter-formatter/-/linter-formatter-14.0.5.tgz",
+      "integrity": "sha512-Ht9/FNwoZuW95rsgJ4aR+d0LSkVqw5dC+wp5Hab4HtPhdSsDcTEA1Q53JUubjhcpKnwNxv/aNxh1iXMBiNrSqA==",
       "dev": true,
       "dependencies": {
         "@azu/format-text": "^1.0.2",
         "@azu/style-format": "^1.0.1",
-        "@textlint/module-interop": "^14.0.4",
-        "@textlint/types": "^14.0.4",
+        "@textlint/module-interop": "^14.0.5",
+        "@textlint/types": "^14.0.5",
         "chalk": "^4.1.2",
         "debug": "^4.3.4",
         "js-yaml": "^3.14.1",
@@ -531,26 +531,26 @@
       }
     },
     "node_modules/@textlint/markdown-to-ast": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/markdown-to-ast/-/markdown-to-ast-14.0.4.tgz",
-      "integrity": "sha512-D9UUxnRJoNROVjOa9bhoQPDdRvlvS/xP3MJo0Kl6b/mJFi0dOlW31WUfpOFjZkp4uXkL+oo0ji7AMnmV6JORsQ==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/markdown-to-ast/-/markdown-to-ast-14.0.5.tgz",
+      "integrity": "sha512-m6EIJL/qhvGuB5zXCQNHBF8MdhPpN4s2F2WPxfwFunXb/K58murSEkUTCviuHiDG/7XOFT030dY9eck3Pez0gg==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4",
+        "@textlint/ast-node-types": "^14.0.5",
         "debug": "^4.3.4",
         "mdast-util-gfm-autolink-literal": "^0.1.3",
+        "neotraverse": "^0.6.15",
         "remark-footnotes": "^3.0.0",
         "remark-frontmatter": "^3.0.0",
         "remark-gfm": "^1.0.0",
         "remark-parse": "^9.0.0",
-        "traverse": "^0.6.8",
         "unified": "^9.2.2"
       }
     },
     "node_modules/@textlint/markdown-to-ast/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/@textlint/markdown-to-ast/node_modules/bail": {
@@ -780,73 +780,73 @@
       }
     },
     "node_modules/@textlint/module-interop": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/module-interop/-/module-interop-14.0.4.tgz",
-      "integrity": "sha512-okv52pRSQ1aeC8rim8qp2D2Fmj/oKDYGY2itdeZhj9E/vdkU9/r7OpdcxyuNiuqLEd/sWw03EAwt3S6mlfNIOw==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/module-interop/-/module-interop-14.0.5.tgz",
+      "integrity": "sha512-naK1z6omW/1C0UF8kLlnmtx0Ikmnp2DUUm5C2mEt5dpEqpXF39/dKFNbMOrac0nLh/65QCpj8m9GlpbbrKKjHw==",
       "dev": true
     },
     "node_modules/@textlint/source-code-fixer": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/source-code-fixer/-/source-code-fixer-14.0.4.tgz",
-      "integrity": "sha512-gIUeWjF0WdSwgCUhW310hKJsWOyRyFe6PGaqqCk7Mhc+vVcePfmC8mmmhVgeuyys/Dhe+0iaP4M1eJf4COaIQw==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/source-code-fixer/-/source-code-fixer-14.0.5.tgz",
+      "integrity": "sha512-JNSBVFQ09LXxeiebQ4PI72N1XTW/CZb3gVewnojL/un39oAo3yGjzFox/59TL5rdrGAqsijOq4CrWkJ+3Xb2kg==",
       "dev": true,
       "dependencies": {
-        "@textlint/types": "^14.0.4",
+        "@textlint/types": "^14.0.5",
         "debug": "^4.3.4"
       }
     },
     "node_modules/@textlint/text-to-ast": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/text-to-ast/-/text-to-ast-14.0.4.tgz",
-      "integrity": "sha512-r2KSnKzhsCIvX72yX+7sEuu9nDQIS4+xRsSffuXYB0etRQUI6VTTsE6Ibd6yMbEsMDUF4BfKWzNGn+bQ8U7oHA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/text-to-ast/-/text-to-ast-14.0.5.tgz",
+      "integrity": "sha512-3dq1OL6gU522H+/b+NmE4z8OXMG5aLgKAlBu1zBbcXGAjgtIEdplYn6XGvpkGRM2FnypMzsDIUjzwUS8bjbpWw==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4"
+        "@textlint/ast-node-types": "^14.0.5"
       }
     },
     "node_modules/@textlint/text-to-ast/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/@textlint/textlint-plugin-markdown": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/textlint-plugin-markdown/-/textlint-plugin-markdown-14.0.4.tgz",
-      "integrity": "sha512-mqQieI9U5GTRTjkK4Cj57Axl6fVloaA8g0+sCsp3TjmNWyEgGBvt3aw+FIUiFTvheg9L3RGe/aXgvp5ORADOAA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/textlint-plugin-markdown/-/textlint-plugin-markdown-14.0.5.tgz",
+      "integrity": "sha512-QjfATGYKuPkLVT+GsG8WjwrkgNpksKED6Qd4TDL/q2LwNVEZ6ULFLZmufL9z9ENCeBs6y0YDE7IbE26Vhq5zww==",
       "dev": true,
       "dependencies": {
-        "@textlint/markdown-to-ast": "^14.0.4"
+        "@textlint/markdown-to-ast": "^14.0.5"
       }
     },
     "node_modules/@textlint/textlint-plugin-text": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/textlint-plugin-text/-/textlint-plugin-text-14.0.4.tgz",
-      "integrity": "sha512-HwTQyOcwDRrPPHyD8lwSMyGR1ETasR2WK6BLO0PRbowRe6K/K4b9OBBd6+nJcRFa+9Nd6p7nxPzA2WxDi1X/Zg==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/textlint-plugin-text/-/textlint-plugin-text-14.0.5.tgz",
+      "integrity": "sha512-OJJP5WXo3rqqL7bXYy44f8z9s1Ssb/2/nmTStbTepSOujQjOoEwehtwV+QBwdzwRkzbQFcZ0HS+dJ/yNdneKWA==",
       "dev": true,
       "dependencies": {
-        "@textlint/text-to-ast": "^14.0.4"
+        "@textlint/text-to-ast": "^14.0.5"
       }
     },
     "node_modules/@textlint/types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/types/-/types-14.0.4.tgz",
-      "integrity": "sha512-SNdFG/GB6utYeHmNfoAMlI+K1NykPxK9TtilkEfhr/fF9TqmeeJ+6CMk5NLQzEvfKm6jUbv2pp5DPS27vo6GKg==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/types/-/types-14.0.5.tgz",
+      "integrity": "sha512-scrY5Zzz/SSAXaxw6OspbgFuiyQpHq88iK7OhUYE3BMnM90ijKzSohGMUHHK872zenzGTTOepE2sdjkIyXr1pA==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4"
+        "@textlint/ast-node-types": "^14.0.5"
       }
     },
     "node_modules/@textlint/types/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/@textlint/utils": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/utils/-/utils-14.0.4.tgz",
-      "integrity": "sha512-/ThtVZCB/vB2e8+MnKquCFNO2cKXCPEGxFlkdvJ5g9q9ODpVyFcf2ogYoIlvR7cNotvq67zVjENS7dsGDNFEmw==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/utils/-/utils-14.0.5.tgz",
+      "integrity": "sha512-+EDQlPx4t/DcH4EYXB62J+5mTRdJaMlFEyzCK7QUfZ9u2JeIE+AFt4D7xDAeiXcdxYTAm2ASdJ+lw7z3Z+vasQ==",
       "dev": true
     },
     "node_modules/@types/concat-stream": {
@@ -898,12 +898,12 @@
       "dev": true
     },
     "node_modules/@types/mdast": {
-      "version": "3.0.11",
-      "resolved": "https://registry.npmjs.org/@types/mdast/-/mdast-3.0.11.tgz",
-      "integrity": "sha512-Y/uImid8aAwrEA24/1tcRZwpxX3pIFTSilcNDKSPn+Y2iDywSEachzRuvgAYYLR3wpGXAsMbv5lvKLDZLeYPAw==",
+      "version": "3.0.15",
+      "resolved": "https://registry.npmjs.org/@types/mdast/-/mdast-3.0.15.tgz",
+      "integrity": "sha512-LnwD+mUEfxWMa1QpDraczIn6k0Ee3SMicuYSSzS6ZYl2gKS09EClnJYGd8Du6rfc5r/GZEk5o1mRb8TaTj03sQ==",
       "dev": true,
       "dependencies": {
-        "@types/unist": "*"
+        "@types/unist": "^2"
       }
     },
     "node_modules/@types/ms": {
@@ -952,15 +952,15 @@
       }
     },
     "node_modules/ajv": {
-      "version": "8.12.0",
-      "resolved": "https://registry.npmjs.org/ajv/-/ajv-8.12.0.tgz",
-      "integrity": "sha512-sRu1kpcO9yLtYxBKvqfTeh9KzZEwO3STyX1HT+4CaDzC6HpTGYhIhPIzj9XuKU7KYDwnaeh5hcOwjy1QuJzBPA==",
+      "version": "8.17.1",
+      "resolved": "https://registry.npmjs.org/ajv/-/ajv-8.17.1.tgz",
+      "integrity": "sha512-B/gBuNg5SiMTrPkC+A2+cW0RszwxYmn6VYxB/inlBStS5nx6xHIt/ehKRhIMhqusl7a8LjQoZnjCs5vhwxOQ1g==",
       "dev": true,
       "dependencies": {
-        "fast-deep-equal": "^3.1.1",
+        "fast-deep-equal": "^3.1.3",
+        "fast-uri": "^3.0.1",
         "json-schema-traverse": "^1.0.0",
-        "require-from-string": "^2.0.2",
-        "uri-js": "^4.2.2"
+        "require-from-string": "^2.0.2"
       },
       "funding": {
         "type": "github",
@@ -1417,6 +1417,12 @@
       "integrity": "sha512-DCXu6Ifhqcks7TZKY3Hxp3y6qphY5SJZmrWMDrKcERSOXWQdMhU9Ig/PYrzyw/ul9jOIyh0N4M0tbC5hodg8dw==",
       "dev": true
     },
+    "node_modules/fast-uri": {
+      "version": "3.0.1",
+      "resolved": "https://registry.npmjs.org/fast-uri/-/fast-uri-3.0.1.tgz",
+      "integrity": "sha512-MWipKbbYiYI0UC7cl8m/i/IWTqfC8YXsqjzybjddLsFjStroQzsHXkc73JutMvBiXmOvapk+axIl79ig5t55Bw==",
+      "dev": true
+    },
     "node_modules/fault": {
       "version": "2.0.1",
       "resolved": "https://registry.npmjs.org/fault/-/fault-2.0.1.tgz",
@@ -3630,6 +3636,15 @@
       "integrity": "sha512-sGkPx+VjMtmA6MX27oA4FBFELFCZZ4S4XqeGOXCv68tT+jb3vk/RyaKWP0PTKyWtmLSM0b+adUTEvbs1PEaH2w==",
       "dev": true
     },
+    "node_modules/neotraverse": {
+      "version": "0.6.15",
+      "resolved": "https://registry.npmjs.org/neotraverse/-/neotraverse-0.6.15.tgz",
+      "integrity": "sha512-HZpdkco+JeXq0G+WWpMJ4NsX3pqb5O7eR9uGz3FfoFt+LYzU8iRWp49nJtud6hsDoywM8tIrDo3gjgmOqJA8LA==",
+      "dev": true,
+      "engines": {
+        "node": ">= 10"
+      }
+    },
     "node_modules/nopt": {
       "version": "7.2.0",
       "resolved": "https://registry.npmjs.org/nopt/-/nopt-7.2.0.tgz",
@@ -3918,15 +3933,6 @@
         "node": "^14.17.0 || ^16.13.0 || >=18.0.0"
       }
     },
-    "node_modules/punycode": {
-      "version": "2.3.1",
-      "resolved": "https://registry.npmjs.org/punycode/-/punycode-2.3.1.tgz",
-      "integrity": "sha512-vYt7UD1U9Wg6138shLtLOvdAu+8DsC/ilFtEVHcH+wydcSpNE20AfSOduf6MkRFahL5FY7X1oU7nKVZFtfq8Fg==",
-      "dev": true,
-      "engines": {
-        "node": ">=6"
-      }
-    },
     "node_modules/quotation": {
       "version": "2.0.3",
       "resolved": "https://registry.npmjs.org/quotation/-/quotation-2.0.3.tgz",
@@ -5999,9 +6005,9 @@
       }
     },
     "node_modules/table": {
-      "version": "6.8.1",
-      "resolved": "https://registry.npmjs.org/table/-/table-6.8.1.tgz",
-      "integrity": "sha512-Y4X9zqrCftUhMeH2EptSSERdVKt/nEdijTOacGD/97EKjhQ/Qs8RTlEGABSJNNN8lac9kheH+af7yAkEWlgneA==",
+      "version": "6.8.2",
+      "resolved": "https://registry.npmjs.org/table/-/table-6.8.2.tgz",
+      "integrity": "sha512-w2sfv80nrAh2VCbqR5AK27wswXhqcck2AhfnNW76beQXskGZ1V12GwS//yYVa3d3fcvAip2OUnbDAjW2k3v9fA==",
       "dev": true,
       "dependencies": {
         "ajv": "^8.0.1",
@@ -6021,23 +6027,23 @@
       "dev": true
     },
     "node_modules/textlint": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/textlint/-/textlint-14.0.4.tgz",
-      "integrity": "sha512-xPQkC/BftPjizjs31wci/791EjwfN11iRLrNKiPVBogYd1r+6TnSxbCERZhgXCGcD9tEHss0kOYc0+vPEEG8jg==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/textlint/-/textlint-14.0.5.tgz",
+      "integrity": "sha512-k2x1itoYuUPE6FCodxV7cW0Rcnycx8DVYMGQd8G/iFGPaT8As3XdXMfATTGRQIkMR5TkbCeBVVrWKTNHotCx2g==",
       "dev": true,
       "dependencies": {
-        "@textlint/ast-node-types": "^14.0.4",
-        "@textlint/ast-traverse": "^14.0.4",
-        "@textlint/config-loader": "^14.0.4",
-        "@textlint/feature-flag": "^14.0.4",
-        "@textlint/fixer-formatter": "^14.0.4",
-        "@textlint/kernel": "^14.0.4",
-        "@textlint/linter-formatter": "^14.0.4",
-        "@textlint/module-interop": "^14.0.4",
-        "@textlint/textlint-plugin-markdown": "^14.0.4",
-        "@textlint/textlint-plugin-text": "^14.0.4",
-        "@textlint/types": "^14.0.4",
-        "@textlint/utils": "^14.0.4",
+        "@textlint/ast-node-types": "^14.0.5",
+        "@textlint/ast-traverse": "^14.0.5",
+        "@textlint/config-loader": "^14.0.5",
+        "@textlint/feature-flag": "^14.0.5",
+        "@textlint/fixer-formatter": "^14.0.5",
+        "@textlint/kernel": "^14.0.5",
+        "@textlint/linter-formatter": "^14.0.5",
+        "@textlint/module-interop": "^14.0.5",
+        "@textlint/textlint-plugin-markdown": "^14.0.5",
+        "@textlint/textlint-plugin-text": "^14.0.5",
+        "@textlint/types": "^14.0.5",
+        "@textlint/utils": "^14.0.5",
         "debug": "^4.3.4",
         "file-entry-cache": "^5.0.1",
         "get-stdin": "^5.0.1",
@@ -6163,9 +6169,9 @@
       }
     },
     "node_modules/textlint/node_modules/@textlint/ast-node-types": {
-      "version": "14.0.4",
-      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.4.tgz",
-      "integrity": "sha512-O7L1pgle030Co9ou1+6e2/6GgcIpKgqwEc0XiBabokc22Yl0QEkrf00K/usBDmSx+wo1ficWBux2mfBEF0jnDA==",
+      "version": "14.0.5",
+      "resolved": "https://registry.npmjs.org/@textlint/ast-node-types/-/ast-node-types-14.0.5.tgz",
+      "integrity": "sha512-pOMQX9MGee9VYKYVsmQzJpZxllEiTHUgZgpRxorHDNqojrlU6cBKWDX1+cQhptpP+Ry/wS2VsWK6kHx6u1v7CQ==",
       "dev": true
     },
     "node_modules/to-regex-range": {
@@ -6180,18 +6186,6 @@
         "node": ">=8.0"
       }
     },
-    "node_modules/traverse": {
-      "version": "0.6.8",
-      "resolved": "https://registry.npmjs.org/traverse/-/traverse-0.6.8.tgz",
-      "integrity": "sha512-aXJDbk6SnumuaZSANd21XAo15ucCDE38H4fkqiGsc3MhCK+wOlZvLP9cB/TvpHT0mOyWgC4Z8EwRlzqYSUzdsA==",
-      "dev": true,
-      "engines": {
-        "node": ">= 0.4"
-      },
-      "funding": {
-        "url": "https://github.com/sponsors/ljharb"
-      }
-    },
     "node_modules/trough": {
       "version": "2.1.0",
       "resolved": "https://registry.npmjs.org/trough/-/trough-2.1.0.tgz",
@@ -6206,6 +6200,7 @@
       "version": "1.0.1",
       "resolved": "https://registry.npmjs.org/try-resolve/-/try-resolve-1.0.1.tgz",
       "integrity": "sha512-yHeaPjCBzVaXwWl5IMUapTaTC2rn/eBYg2fsG2L+CvJd+ttFbk0ylDnpTO3wVhosmE1tQEvcebbBeKLCwScQSQ==",
+      "deprecated": "Package no longer supported. Contact Support at https://www.npmjs.com/support for more info.",
       "dev": true
     },
     "node_modules/type-check": {
@@ -6748,15 +6743,6 @@
         "url": "https://opencollective.com/unified"
       }
     },
-    "node_modules/uri-js": {
-      "version": "4.4.1",
-      "resolved": "https://registry.npmjs.org/uri-js/-/uri-js-4.4.1.tgz",
-      "integrity": "sha512-7rKUyy33Q1yc98pQ1DAmLtwX109F7TIfWlW1Ydo8Wl1ii1SeHieeh0HHfPeL2fMXK6z0s8ecKs9frCuLJvndBg==",
-      "dev": true,
-      "dependencies": {
-        "punycode": "^2.1.0"
-      }
-    },
     "node_modules/util-deprecate": {
       "version": "1.0.2",
       "resolved": "https://registry.npmjs.org/util-deprecate/-/util-deprecate-1.0.2.tgz",

package.json

@@ -15,7 +15,7 @@
     "remark-lint-prohibited-strings": "^4.0.0",
     "remark-lint-unordered-list-marker-style": "^4.0.0",
     "remark-stringify": "^11.0.0",
-    "textlint": "^14.0.4",
+    "textlint": "^14.0.5",
     "textlint-filter-rule-comments": "^1.2.2",
     "textlint-rule-common-misspellings": "^1.0.1",
     "textlint-rule-terminology": "^5.0.13"

source/_dashboards/button.markdown

@@ -140,8 +140,8 @@ type: button
 name: Turn Off Lights
 show_state: false
 tap_action:
-  action: call-service
-  service: script.turn_on
+  action: perform-action
+  perform_action: script.turn_on
   data:
     entity_id: script.turn_off_lights
 ```

source/_dashboards/entities.markdown

@@ -426,8 +426,8 @@ entities:
     name: Bed light transition
     action_name: Toggle light
     tap_action:
-      action: call-service
-      service: light.toggle
+      action: perform-action
+      perform_action: light.toggle
       data:
         entity_id: light.bed_light
         transition: 10
@@ -458,8 +458,8 @@ entities:
     name: Power cycle LibreELEC
     icon: mdi:power-cycle
     tap_action:
-      action: call-service
+      action: perform-action
       confirmation:
         text: Are you sure you want to restart?
-      service: script.libreelec_power_cycle
+      perform_action: script.libreelec_power_cycle
 ```

source/_dashboards/picture-entity.markdown

@@ -135,8 +135,8 @@ type: picture-entity
 entity: camera.backdoor
 camera_view: live
 tap_action:
-  action: call-service
-  service: camera.snapshot
+  action: perform-action
+  perform_action: camera.snapshot
   data:
     entity_id: camera.backdoor
     filename: '/shared/backdoor-{{ now().strftime("%Y-%m-%d-%H%M%S") }}.jpg'

source/_dashboards/picture-glance.markdown

@@ -197,35 +197,35 @@ If your camera supports <abbr title="pan, tilt, and zoom">PTZ</abbr> (can be mov
       - entity: button.camera1_ptz_left
         icon: mdi:pan-left
         tap_action:
-          action: call-service
-          service: button.press
+          action: perform-action
+          perform_action: button.press
           data:
             entity_id: button.camera1_ptz_left
       - entity: button.camera1_ptz_right
         icon: mdi:pan-right
         tap_action:
-          action: call-service
-          service: button.press
+          action: perform-action
+          perform_action: button.press
           data:
             entity_id: button.camera1_ptz_right
       - entity: button.camera1_ptz_up
         icon: mdi:pan-up
         tap_action:
-          action: call-service
-          service: button.press
+          action: perform-action
+          perform_action: button.press
           data:
             entity_id: button.camera1_ptz_up
       - entity: button.camera1_ptz_down
         icon: mdi:pan-down
         tap_action:
-          action: call-service
-          service: button.press
+          action: perform-action
+          perform_action: button.press
           data:
             entity_id: button.camera1_ptz_down
     camera_image: camera.camera1_sub
     tap_action:
-      action: call-service
-      service: light.toggle
+      action: perform-action
+      perform_action: light.toggle
       target:
         entity_id: light.philips_929003052501_01_huelight
     ```

source/_dashboards/picture.markdown

@@ -80,8 +80,8 @@ Toggle entity using an action:
 type: picture
 image: /local/light.png
 tap_action:
-  action: call-service
-  service: light.toggle
+  action: perform-action
+  perform_action: light.toggle
   data:
     entity_id: light.ceiling_lights
 ```

source/_dashboards/sections.markdown

@@ -64,7 +64,7 @@ Once you have created a sections view, you can populate it with sections and car
 
 ## Deleting a section
 
-1. To delete a section, go to the dashboard and in the top right corner, select the pencil icon.
+1. To delete a section, go to the dashboard and in the top right corner, select the edit {% icon "mdi:edit" %} button.
 2. Open the view with the section you want to delete.
 3. Select the delete {% icon "mdi:trash" %} button.
 
@@ -72,7 +72,7 @@ Once you have created a sections view, you can populate it with sections and car
 
 In the sections view, you can rearrange sections and cards by dragging them to a new location. This is not yet possible in other views.
 
-1. To edit your dashboard, in the top right corner, select the pencil icon.
+1. To edit your dashboard, in the top right corner, select the edit {% icon "mdi:edit" %} button.
 2. To rearrange sections, hold the move {% icon "mdi:cursor-move" %} button and move the card.
 
     <p class='img'>

source/_docs/authentication.markdown

@@ -51,6 +51,10 @@ _Make sure to choose a secure password!_ At some time in the future, you will pr
 
 As an extra level of security, you can turn on [multi-factor authentication](/docs/authentication/multi-factor-auth/).
 
+## Adding a person to Home Assistant
+
+If you have administrator rights, you can [add a person to Home Assistant](/integrations/person/#adding-a-person-to-home-assistant) and create them a user account.
+
 ## Changing display or user name
 
 To learn how to change a display or user name, refer to [setting up basic information](/docs/configuration/basic/).

source/_docs/organizing/areas.markdown

@@ -44,7 +44,7 @@ Follow these steps to create a new area from the **Areas** view.
 If an area has not yet been assigned to a floor, it is shown in the **Unassigned areas** section. Follow these steps to assign an area to a floor.
 
 1. Go to {% my areas title="**Settings** > **Areas, labels & zones**" %} and select **Create area**.
-2. On the area card, select the pencil icon.
+2. On the area card, select the edit {% icon "mdi:edit" %} button.
 3. In the dialog, select the floor and add labels, if you like.
 
 ## Assigning an area to multiple items
@@ -64,7 +64,7 @@ You can assign an area to multiple items at once in the automation, scene, scrip
 
 Follow these steps to edit an area.
 
-1. Go to {% my areas title="**Settings** > **Areas, labels & zones**" %} and on the area card, select the pencil icon.
+1. Go to {% my areas title="**Settings** > **Areas, labels & zones**" %} and on the area card, select the edit {% icon "mdi:edit" %} button.
 2. In the dialog, adjust the area details you want to change:
    - Edit the area **Name**.
    - Add an icon (We use [Material icons](https://pictogrammers.com/library/mdi/)).

source/_docs/organizing/labels.markdown

@@ -38,7 +38,7 @@ Follow these steps to apply a label
 
 1. To apply a label to an area:
    - Go to {% my areas title="**Settings** > **Areas, labels & zones**" %}.
-   - On the area card, select the pencil icon.
+   - On the area card, select the edit {% icon "mdi:edit" %} button.
    - Select one or more labels or select **Add new label** to create a new one.
 2. To apply a label to a device, entity, or helper:
    - Go to **{% my integrations title="Settings > Devices & Services" %}** and open the respective tab.

source/_docs/organizing/tables.markdown

@@ -74,5 +74,6 @@ To customize columns, follow these steps:
 1. In the top right corner of the table, select the cog wheel.
 2. To hide a column, deselect it.
 3. To rearrange the order, grab the column and move it to its new position.
+4. To sort, select the column header of interest.
 
    ![Screencast showing how to show, hide, and rearrange columns](/images/organizing/customize_columns.webp)

source/_docs/z-wave/controllers.markdown

@@ -9,9 +9,29 @@ You need to have a compatible Z-Wave stick or module installed. The following de
 
 {% warning %}
 
-Until recently, 700 series Z-Wave Controllers had a bug that could cause the mesh to be flooded on some networks and the controller to become unresponsive. At present, all 700 series controllers share the same firmware and are subject to this bug. It appears that this bug is largely, if not completely, resolved as of firmware version 7.17.2.
+The firmwares of 700 and 800 series Z-Wave controllers have several bugs which impact the stability of the mesh and can cause the controller to become unresponsive. Because there is no known firmware version that is completely fixed, it is recommended to choose a firmware based on the following criteria:
 
-Users should upgrade the firmware on all 700 series controllers to version 7.17.2 or greater. Firmware can be upgraded using the below directions:
+- 700 series:
+  - prefer SDK versions 7.17.2 to 7.18.x
+  - SDK versions 7.19.x are okay
+  - avoid SDK versions before 7.17.2
+  - avoid SDK versions 7.20 to 7.21.3
+
+- 800 series
+  - prefer SDK versions 7.22.x
+  - SDK versions 7.17.2 to 7.19.x are okay
+  - avoid SDK versions before 7.17.2
+  - avoid SDK versions 7.20 to 7.21.3
+
+{% note %}
+The SDK version does not have to match the firmware version. If you are unsure which SDK versions a firmware is based on, contact the manufacturer of your device.
+{% endnote %}
+
+{% important %}
+You should upgrade the firmware on all 700 and 800 series controllers to a recommended version.
+{% endimportant %}
+
+Firmware can be upgraded using the below directions:
 
 - [Upgrade instructions using Linux](https://github.com/kpine/zwave-js-server-docker/wiki/700-series-Controller-Firmware-Updates-(Linux))
 - [Upgrade instructions using Windows (Aeotec)](https://aeotec.freshdesk.com/support/solutions/articles/6000252296-update-z-stick-7-with-windows)
@@ -21,8 +41,9 @@ Users should upgrade the firmware on all 700 series controllers to version 7.17.
 {% endwarning %}
 
 - 800 series controllers (with some caveats, see notes)
-  - Zooz 800 Series Z-Wave Long Range S2 Stick (ZST39 LR)
+  - Z-Wave.Me Z-Station
   - HomeSeer SmartStick G8
+  - Zooz 800 Series Z-Wave Long Range S2 Stick (ZST39 LR)
 
 - 700 series controllers
   - Aeotec Z-Stick 7 USB stick (ZWA010) (the EU version is not recommended due to RF performance issues)
@@ -141,9 +162,9 @@ If you've installed the Z-Wave.Me Z-Way software. In order to use Z-Wave JS inst
 
 This procedure has been tested with the following modules:
 
-  - Aeotec Z-Pi 7 Raspberry Pi HAT/Shield
-  - Z-Wave.Me RaZberry 7
-  - Z-Wave.Me RaZberry 7 Pro
+- Aeotec Z-Pi 7 Raspberry Pi HAT/Shield
+- Z-Wave.Me RaZberry 7
+- Z-Wave.Me RaZberry 7 Pro
 
 1. Make sure the module is properly seated on the Home Assistant Yellow.
    ![Aeotec Z-Pi 7 on Home Assistant Yellow](/images/docs/z-wave/zpi-7-yellow.jpg).

source/_includes/common-tasks/data_disk.md

@@ -64,7 +64,7 @@ This can be an option if the following elements apply to your use case:
 
 - You already have a functioning Home Assistant instance (system 1) that is using an external data disk.
 - You have another, new, Home Assistant instance (system 2).
-- You want now want to use the data disk of system 1 on system 2 instead.
+- You now want to use the data disk of system 1 on system 2 instead.
 
 The aim is to migrate the data from system 1 to system 2. One way to do this is by [restoring a backup](/common-tasks/os/#restoring-a-backup). The other way is to move the data disk. This can be an interesting option if you have a large amount of data on your external disk or if your external disk has more storage capacity than your new system.
 

source/_includes/common-tasks/third-party-addons.md

@@ -1,25 +1,33 @@
-##  Installing third-party add-ons
+## Installing a third-party add-on repository
 
-Home Assistant allows anyone to create add-on repositories to share their add-ons easily. To try this locally, you can use our example add-on repository at
+Home Assistant allows anyone to create an add-on repository to share their own add-ons with the community.
 
-```text
-https://github.com/home-assistant/hassio-addons-example
-```
-
-{% caution %}
+{% warning %}
 Home Assistant cannot guarantee the quality or security of third-party add-ons. Use at your own risk.
-{% endcaution %}
+{% endwarning %}
 
-<p class='img'>
-<img src='/images/hassio/screenshots/dashboard.png' />
-From {% my supervisor title="Settings > Add-ons" %} open the add-on store.
-</p>
+To add an add-on repository, follow these steps:
 
-<p class='img'>
-<img src='/images/hassio/screenshots/adding_repositories.png' />
-Add the URL of the repository and then press "Add". A new card for the repository will appear.
-</p>
+1. Copy the URL of the repository.
+   - The URL is the git repository clone URL (on GitHub, use the Code button and copy the HTTPS URL).
+   - This documentation uses an example add-on repository. It is not practically useful but follows the same steps. 
+   - If you are interested in add-on development, refer to our [add-on development documentation](https://developers.home-assistant.io/docs/add-ons).
 
-### Help: Repository is not showing up
+        ```text
+        https://github.com/home-assistant/hassio-addons-example
+        ```
+2. Go to {% my supervisor title="**Settings** > **Add-ons**" %} and select **Add-on store**.
+   ![Screenshot of the add-on store](/images/getting-started/add-ons.png)
+3. In the top-right corner, select the three dots {% icon "mdi:dots-vertical" %} menu, and select **Repositories**.
+4. Add the URL of the repository and select **Add**.
+   ![Screenshot of the add-on store](/images/hassio/screenshots/adding_repositories.png)
+   - **Result**: A new card for the repository will appear.
+   ![Screenshot of the add-on store](/images/hassio/screenshots/add-ons-community_example.png)
 
-If you have added a repository, but it's not showing up, it means that the repository contains invalid configuration. Go to {% my logs title="Settings > System > Logs" %} to find the System log. It should tell you what went wrong. Report this information to the repository author.
+### Troubleshooting: Repository is not showing up
+
+If you have added an add-on repository, but it's not showing up, make sure to refresh your browser. If it still doesn't show up, the add-on repository may contain invalid configuration data.
+
+1. Go to {% my logs title="**Settings** > **System** > **Logs**" %} and select Supervisor in the top right corner to get the Supervisor log.
+   - It should tell you what went wrong.
+2. Report this information to the add-on repository author.

source/_includes/dashboard/edit_dashboard.md

@@ -4,7 +4,7 @@
 
 To add the {{ title | downcase }} to your user interface:
 
-1. In the top right of the screen, select the pencil icon.
+1. In the top right of the screen, select the edit {% icon "mdi:edit" %} button.
    - If this is your first time editing a dashboard, the **Edit dashboard** dialog appears.
      - By editing the dashboard, you are taking over control of this dashboard.
      - This means that it is no longer automatically updated when new dashboard elements become available.

source/_includes/installation/container.md

@@ -41,7 +41,7 @@ Once the Home Assistant Container is running Home Assistant should be accessible
 If you change the configuration, you have to restart the server. To do that you have 3 options.
 
 1. In your Home Assistant UI, go to the **Settings** > **System** and click the **Restart** button.
-2. You can go to the **Developer Tools** > **Actions**, select the service `homeassistant.restart` and select **Perform action**.
+2. You can go to the **Developer Tools** > **Actions**, select `homeassistant.restart` and select **Perform action**.
 3. Restart it from a terminal.
 
 {% tabbed_block %}

source/_integrations/alarm_control_panel.mqtt.markdown

@@ -135,6 +135,10 @@ device:
       description: "The model of the device."
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: "The name of the device."
       required: false

source/_integrations/alexa.smart_home.markdown

@@ -149,7 +149,7 @@ The first thing you need to do after signing into the [AWS console](https://cons
 Next you need create a Lambda function.
 
 - Click `Services` in top navigation bar, expand the menu to display all AWS services, then under `Compute` section click `Lambda` to navigate to Lambda console. Or you may use this [link](https://console.aws.amazon.com/lambda/home)
-- **IMPORTANT - Alexa Skills are only supported in certain AWS regions** Your current server location will be displayed on the top right corner (for example, Ohio), make sure you select the server closest to your location / region based on your Amazon account's country, whilst also ensuring that it is within one of the supported regions for Alexa Skills otherwise this will not work!
+- **IMPORTANT - Alexa Skills are only supported in certain AWS regions.** Your current server location will be displayed in the top-right corner (for example, Ohio). Select an available server below that is closest to your location and in your region, based on your Amazon account’s country. Alexa Lambda functions created on other servers will not work properly and may prevent account linking!
   - **US East (N.Virginia)** region for English (US) or English (CA) skills
   - **EU (Ireland)** region for English (UK), English (IN), German (DE), Spanish (ES) or French (FR) skills
   - **US West (Oregon)** region for Japanese and English (AU) skills.
@@ -245,6 +245,10 @@ Alexa needs to link your Amazon account to your Home Assistant account. Therefor
 
     Read [more from the Alexa developer documentation](https://developer.amazon.com/en-US/docs/alexa/account-linking/requirements-account-linking.html) about requirements for account linking.
 
+    {% note %}
+    Despite the Alexa documentation's disclaimer, however, [Let's Encrypt](https://letsencrypt.org/) certificates are still accepted.
+    {% endnote %}
+
 {% important %}
 You must use a valid/trusted SSL certificate for account linking to work.
 Self signed certificates will not work, but you can use a free Let's Encrypt certificate.

source/_integrations/anthropic.markdown

@@ -0,0 +1,77 @@
+---
+title: Anthropic Conversation
+description: Instructions on how to integrate Anthropic Claude as a conversation agent
+ha_category:
+  - Voice
+ha_release: 2024.9
+ha_iot_class: Cloud Polling
+ha_config_flow: true
+ha_codeowners:
+  - '@Shulyaka'
+ha_domain: anthropic
+ha_integration_type: service
+ha_platforms:
+  - conversation
+related:
+  - docs: /voice_control/voice_remote_expose_devices/
+    title: Exposing entities to Assist
+  - docs: /voice_control/assist_create_open_ai_personality/
+    title: Create an AI personality
+  - url: https://console.anthropic.com/settings/keys
+    title: Anthropic API key
+  - url: https://www.anthropic.com
+    title: Anthropic
+  - url: https://claude.ai
+    title: Claude
+---
+
+The **Anthropic** {% term integrations %} adds a conversation agent powered by [Anthropic](https://www.anthropic.com), such as Claude 3.5 Sonnet, in Home Assistant.
+
+Controlling Home Assistant is done by providing the AI access to the Assist API of Home Assistant. You can control what devices and entities it can access from the {% my voice_assistants title="exposed entities page" %}. The AI can provide you information about your devices and control them.
+
+Legal note: Anthropic currently limits the API usage to organizations only, more info here: [Can I use the Claude API for individual use?](https://support.anthropic.com/en/articles/8987200-can-i-use-the-claude-api-for-individual-use)
+
+This integration does not integrate with [sentence triggers](/docs/automation/trigger/#sentence-trigger).
+
+## Prerequisites
+
+- This integration requires an API key to use, [which you can generate here.](https://console.anthropic.com/settings/keys). 
+- This is a paid service, we advise you to monitor your costs in the [Anthropic portal](https://console.anthropic.com/settings/cost) closely.
+
+### Generating an API Key
+
+The Anthropic API key is used to authenticate requests to the Anthropic API. To generate an API key, take the following steps:
+
+1. Log in to the [Anthropic portal](https://console.anthropic.com) or sign up for an account.
+2. Enable billing with a valid credit card on the [plans page](https://console.anthropic.com/settings/plans).
+3. Visit the [API Keys page](https://console.anthropic.com/settings/keys) to retrieve the API key you'll use to configure the integration.
+
+{% include integrations/config_flow.md %}
+
+{% include integrations/option_flow.md %}
+{% configuration_basic %}
+Instructions:
+  description: Instructions for the AI on how it should respond to your requests. It is written using [Home Assistant Templating](/docs/configuration/templating/).
+
+Control Home Assistant:
+  description: If the model is allowed to interact with Home Assistant. It can only control or provide information about entities that are [exposed](/voice_control/voice_remote_expose_devices/) to it.
+
+Recommended settings:
+  description: If enabled, the recommended model and settings are chosen.
+
+{% endconfiguration_basic %}
+
+If you choose not to use the recommended settings, you can configure the following options:
+
+{% configuration_basic %}
+
+Model:
+  description: The model that will complete your prompt. See [models](https://docs.anthropic.com/en/docs/about-claude/models#model-names) for additional details and options.
+
+Maximum Tokens to Return in Response:
+  description: The maximum number of tokens to generate before stopping. Note that our models may stop _before_ reaching this maximum. This parameter only specifies the absolute maximum number of tokens to generate. Different models have different maximum values for this parameter. See [models](https://docs.anthropic.com/en/docs/models-overview) for details.
+
+Temperature:
+  description: Amount of randomness injected into the response. Use `temperature` closer to `0.0` for analytical / multiple choice, and closer to `1.0` for creative and generative tasks. Note that even with `temperature` of `0.0`, the results will not be fully deterministic.
+
+{% endconfiguration_basic %}

source/_integrations/apsystems.markdown

@@ -8,6 +8,7 @@ ha_category:
   - Energy
 ha_domain: apsystems
 ha_platforms:
+  - binary_sensor
   - number
   - sensor
   - switch
@@ -23,6 +24,9 @@ The following data is provided by the integration:
 - Lifetime production (Per input and in total)
 - Current production (Per input and in total)
 - Today's production (Per input and in total)
+- Short circuit error status (per input)
+- Off grid status
+- Output status
 
 The following data can be set by the integration:
 

source/_integrations/autarco.markdown

@@ -11,6 +11,7 @@ ha_codeowners:
   - '@klaasnicolaas'
 ha_domain: autarco
 ha_platforms:
+  - diagnostics
   - sensor
 ha_integration_type: integration
 ---

source/_integrations/bayesian.markdown

@@ -3,6 +3,7 @@ title: Bayesian
 description: Instructions on how to integrate threshold Bayesian sensors into Home Assistant.
 ha_category:
   - Binary sensor
+  - Helper
   - Utility
 ha_iot_class: Local Polling
 ha_release: 0.53
@@ -10,7 +11,7 @@ ha_quality_scale: internal
 ha_domain: bayesian
 ha_platforms:
   - binary_sensor
-ha_integration_type: integration
+ha_integration_type: helper
 ha_codeowners:
   - '@HarvsG'
 related:
@@ -48,7 +49,9 @@ To enable the Bayesian sensor, add the following lines to your {% term "`configu
 # Example configuration.yaml entry
 binary_sensor:
   - platform: bayesian
-    prior: 0.1
+    name: "Kitchen Occupied"
+    prior: 0.3
+    probability_threshold: 0.5
     observations:
       - entity_id: "switch.kitchen_lights"
         prob_given_true: 0.6

source/_integrations/binary_sensor.mqtt.markdown

@@ -96,6 +96,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/bluesound.markdown

@@ -10,10 +10,13 @@ ha_platforms:
   - media_player
 ha_codeowners:
   - '@thrawnarn'
+  - '@LouisChrist'
 ha_integration_type: integration
 related:
   - docs: /docs/configuration/
     title: Configuration file
+ha_config_flow: true
+ha_zeroconf: true
 ---
 
 The `bluesound` platform allows you to control your [Bluesound](https://www.bluesound.com/) HiFi wireless speakers and audio integrations from Home Assistant.

source/_integrations/bmw_connected_drive.markdown

@@ -31,6 +31,7 @@ ha_platforms:
   - sensor
   - switch
 ha_integration_type: integration
+ha_quality_scale: platinum
 ---
 
 The **BMW Connected Drive** {% term integration %} lets you retrieve data of your BMW vehicle from the BMW Connected Drive portal. You need to have a working BMW Connected Drive account and a Connected Drive enabled vehicle for this to work.

source/_integrations/brandt.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/bryant_evolution.markdown

@@ -10,9 +10,9 @@ ha_config_flow: true
 ha_domain: bryant_evolution
 ha_platforms:
   - climate
-ha_zeroconf: false
-ha_homekit: true
-ha_integration_type: integration
+ha_integration_type: device
+ha_codeowners:
+  - '@danielsmyers'
 ---
 
 The **Bryant Evolution** {% term integration %} lets you control Bryant Evolution HVAC systems.

source/_integrations/button.mqtt.markdown

@@ -93,6 +93,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/camera.mqtt.markdown

@@ -95,6 +95,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/climate.mqtt.markdown

@@ -115,6 +115,10 @@ device:
       description: 'The model of the device.'
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: 'The name of the device.'
       required: false

source/_integrations/cover.mqtt.markdown

@@ -106,6 +106,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/cozytouch.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/denonavr.markdown

@@ -81,6 +81,7 @@ Known supported devices:
 - Marantz AV7704
 - Marantz AV8802A
 - Marantz CINEMA 50
+- Marantz CINEMA 60
 - Marantz CINEMA 70s
 - Marantz M-CR510
 - Marantz M-CR511

source/_integrations/device_tracker.mqtt.markdown

@@ -95,6 +95,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/device_trigger.mqtt.markdown

@@ -68,6 +68,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/dsmr.markdown

@@ -11,6 +11,7 @@ ha_codeowners:
   - '@Robbie1221'
   - '@frenck'
 ha_platforms:
+  - diagnostics
   - sensor
 ha_integration_type: hub
 ---

source/_integrations/elevenlabs.markdown

@@ -0,0 +1,47 @@
+---
+title: ElevenLabs text-to-speech
+description: Instructions on how to setup ElevenLabs text-to-speech with Home Assistant.
+ha_category:
+  - Text-to-speech
+ha_release: 2024.8
+ha_iot_class: Cloud Push
+ha_domain: elevenlabs
+ha_platforms:
+  - tts
+ha_config_flow: true
+ha_integration_type: integration
+---
+
+The **ElevenLabs** text-to-speech {% term integrations %} adds support for [ElevenLabs](https://elevenlabs.io/) as text-to-speech to read a text with natural sounding voices.
+## Prerequisites
+
+- You need an ElevenLabs account to use this integration. A free account suffices for basic usage. 
+- For custom voices or more quota you need a subscription.
+- You need your API key from the ElevenLabs website. 
+
+{% include integrations/config_flow.md %}
+
+For an overview of which languages can be used, check the [complete list of supported languages](https://elevenlabs.io/languages).
+
+For a description of which voices are available for use, check your VoiceLab voices.
+
+To see the available models and their benefits, check the [models documentation](https://elevenlabs.io/docs/speech-synthesis/models).
+
+## Action speak
+
+The `tts.speak` action is the modern way to use TTS. Add the `speak` action, select the entity for your ElevenLabs TTS (it's named ElevenLabs by default), select the media player entity or group to send the TTS audio to, and enter the message to speak.
+
+For more options about `speak`, see the Speak section on the main [TTS](/integrations/tts/#service-speak) building block page.
+
+In YAML, your action will look like this:
+
+```yaml
+action: tts.speak
+target:
+  entity_id: tts.elevenlabs
+data:
+  media_player_entity_id: media_player.giant_tv
+  message: Hello, can you hear me now?
+```
+
+For more information about using text-to-speech with Home Assistant and more details on all the options it provides, see the [TTS documentation](/integrations/tts/).

source/_integrations/enphase_envoy.markdown

@@ -11,7 +11,6 @@ ha_config_flow: true
 ha_codeowners:
   - '@bdraco'
   - '@cgarwood'
-  - '@dgomes'
   - '@joostlek'
   - '@catsmanac'
 ha_platforms:

source/_integrations/event.mqtt.markdown

@@ -87,6 +87,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/fan.mqtt.markdown

@@ -102,6 +102,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/feedreader.markdown

@@ -14,6 +14,8 @@ ha_integration_type: integration
 related:
   - docs: /docs/configuration/
     title: Configuration file
+ha_codeowners:
+  - '@mib1185'
 ---
 
 Add an RSS/Atom feed reader that polls feeds every hour and sends new entries into the event bus.

source/_integrations/filter.markdown

@@ -2,6 +2,7 @@
 title: Filter
 description: Instructions on how to integrate Data Filter Sensors into Home Assistant.
 ha_category:
+  - Helper
   - Sensor
   - Utility
 ha_release: 0.65
@@ -12,7 +13,7 @@ ha_codeowners:
 ha_domain: filter
 ha_platforms:
   - sensor
-ha_integration_type: integration
+ha_integration_type: helper
 related:
   - docs: /docs/configuration/
     title: Configuration file

source/_integrations/flexom.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/foscam.markdown

@@ -11,6 +11,7 @@ ha_domain: foscam
 ha_config_flow: true
 ha_platforms:
   - camera
+  - switch
 ha_integration_type: integration
 ---
 

source/_integrations/geniushub.markdown

@@ -19,6 +19,7 @@ ha_platforms:
   - switch
   - water_heater
 ha_integration_type: integration
+ha_config_flow: true
 ---
 
 The `geniushub` integration links Home Assistant with your Genius Hub CH/DHW system, including its zones, devices, and issues.

source/_integrations/group.markdown

@@ -24,6 +24,7 @@ ha_domain: group
 ha_config_flow: true
 ha_platforms:
   - binary_sensor
+  - button
   - cover
   - event
   - fan

source/_integrations/hexaom.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/hi_kumo.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/history_stats.markdown

@@ -1,7 +1,8 @@
 ---
-title: History stats
+title: History Stats
 description: Instructions about how to integrate historical statistics into Home Assistant.
 ha_category:
+  - Helper
   - Sensor
   - Utility
 ha_iot_class: Local Polling
@@ -11,7 +12,7 @@ ha_domain: history_stats
 ha_config_flow: true
 ha_platforms:
   - sensor
-ha_integration_type: integration
+ha_integration_type: helper
 related:
   - docs: /docs/configuration/
     title: Configuration file
@@ -19,7 +20,7 @@ related:
 
 The **History stats** {% term integration %} provides quick statistics about another integration or platforms, using data from the [`history`](/integrations/history/) integration.
 
-It can track how long the {% term integration %} has been in a specific state, in a custom time period.
+It can track how long an {% term entity %} has been in a specific state, in a custom time period.
 
 Examples of what you can track:
 

source/_integrations/humidifier.mqtt.markdown

@@ -120,6 +120,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/image.mqtt.markdown

@@ -98,6 +98,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/iotty.markdown

@@ -1,18 +1,17 @@
 ---
 title: iotty
-description: "Instructions on how to connect iotty Smart Devices to Home Assistant."
-ha_release: "2024.8"
+description: Instructions on how to connect iotty Smart Devices to Home Assistant.
+ha_release: '2024.8'
 ha_category:
   - Switch
-ha_iot_class: "Cloud Polling"
-ha_quality_scale: no score
+ha_iot_class: Cloud Polling
 ha_config_flow: true
 ha_codeowners:
   - '@pburgio'
 ha_domain: iotty
 ha_platforms:
   - switch
-ha_integration_type: hub
+ha_integration_type: device
 ---
 
 The iotty {% term integration%} lets you integrate iotty devices into Home Assistant. The iotty family includes the smart switch for lights and gates, the smart shades switch for blinds and shutters, and the smart outlet. 

source/_integrations/israel_rail.markdown

@@ -1,5 +1,5 @@
 ---
-title: Israel Rail
+title: Israel Railways
 description: Instructions on how to integrate timetable data for traveling in Israel rail within Home Assistant.
 ha_category:
   - Transport

source/_integrations/jewish_calendar.markdown

@@ -13,6 +13,7 @@ ha_platforms:
   - sensor
 ha_integration_type: integration
 ha_config_flow: true
+ha_quality_scale: silver
 ---
 
 The Jewish Calendar (`jewish_calendar`) {% term integration %} displays various information related to the Jewish Calendar as various sensors.

source/_integrations/knocki.markdown

@@ -9,6 +9,7 @@ ha_iot_class: Cloud Push
 ha_codeowners:
   - '@joostlek'
   - '@jgatto1'
+  - '@JakeBosh'
 ha_domain: knocki
 ha_platforms:
   - event

source/_integrations/knx.markdown

@@ -796,20 +796,20 @@ The following values are valid for the `heat_cool_address` and the `heat_cool_st
 
 The following values are valid for the Home Assistant [Climate](/integrations/climate/) `hvac_mode` attribute. Supported values for your KNX thermostats can be specified via `controller_modes` configuration variable:
 
-- `Off` (maps internally to `HVAC_MODE_OFF` within Home Assistant)
-- `Auto` (maps internally to `HVAC_MODE_AUTO` within Home Assistant)
-- `Heat` (maps internally to `HVAC_MODE_HEAT` within Home Assistant)
-- `Cool` (maps internally to `HVAC_MODE_COOL` within Home Assistant)
-- `Fan only` (maps internally to `HVAC_MODE_FAN_ONLY` within Home Assistant)
-- `Dry` (maps internally to `HVAC_MODE_DRY` within Home Assistant)
+- `off` (maps internally to `HVAC_MODE_OFF` within Home Assistant)
+- `auto` (maps internally to `HVAC_MODE_AUTO` within Home Assistant)
+- `heat` (maps internally to `HVAC_MODE_HEAT` within Home Assistant)
+- `cool` (maps internally to `HVAC_MODE_COOL` within Home Assistant)
+- `fan_only` (maps internally to `HVAC_MODE_FAN_ONLY` within Home Assistant)
+- `dehumidification` (maps internally to `HVAC_MODE_DRY` within Home Assistant)
 
 The following presets are valid for the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute. Supported values for your KNX thermostats can be specified via `operation_modes` configuration variable:
 
-- `Auto` (maps to `none` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
-- `Comfort` (maps to `comfort` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
-- `Standby` (maps to `away` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
-- `Night` (maps to `sleep` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
-- `Frost Protection` (maps to `eco` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
+- `auto` (maps to `none` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
+- `comfort` (maps to `comfort` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
+- `standby` (maps to `away` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
+- `economy` (maps to `sleep` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
+- `building_protection` (maps to `eco` of the Home Assistant [Climate](/integrations/climate/) `preset_mode` attribute)
 
 {% configuration %}
 name:
@@ -866,7 +866,7 @@ command_value_state_address:
   required: false
   type: [string, list]
 operation_mode_address:
-  description: KNX address for setting operation mode (Frost protection/night/comfort). *DPT 20.102*
+  description: KNX address for setting operation mode (auto / building protection / economy / standby / comfort). *DPT 20.102*
   required: false
   type: [string, list]
 operation_mode_state_address:
@@ -902,7 +902,7 @@ operation_mode_frost_protection_address:
   required: false
   type: [string, list]
 operation_mode_night_address:
-  description: KNX address for switching on/off night mode. *DPT 1*
+  description: KNX address for switching on/off economy mode. *DPT 1*
   required: false
   type: [string, list]
 operation_mode_comfort_address:

source/_integrations/lawn_mower.mqtt.markdown

@@ -96,6 +96,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/lifx.markdown

@@ -18,6 +18,8 @@ ha_platforms:
   - sensor
 ha_integration_type: integration
 ha_dhcp: true
+ha_codeowners:
+  - '@Djelibeybi'
 ---
 
 The LIFX integration automatically discovers [LIFX](https://www.lifx.com) lights on each network that is enabled in Home Assistant's [network configuration](/integrations/network). Suppose any of your LIFX lights are not automatically discovered. In that case, you can add them manually using the user interface by following the configuration steps below for each light you want to add:

source/_integrations/light.mqtt.markdown

@@ -164,6 +164,10 @@ device:
       description: 'The model of the device.'
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: 'The name of the device.'
       required: false

source/_integrations/lock.mqtt.markdown

@@ -108,6 +108,10 @@ device:
       description: 'The model of the device.'
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: 'The name of the device.'
       required: false

source/_integrations/madvr.markdown

@@ -2,8 +2,8 @@
 title: madVR Envy
 description: Instructions on how to integrate a madVR Envy into Home Assistant.
 ha_category:
-  - Remote
   - Binary Sensor
+  - Remote
   - Sensor
 ha_release: '2024.8'
 ha_iot_class: Local Push

source/_integrations/mastodon.markdown

@@ -11,10 +11,8 @@ ha_domain: mastodon
 ha_iot_class: Cloud Push
 ha_platforms:
   - notify
-ha_integration_type: integration
-related:
-  - docs: /docs/configuration/
-    title: Configuration file
+ha_integration_type: service
+ha_config_flow: true
 ---
 
 The `mastodon` platform uses [Mastodon](https://joinmastodon.org/) to deliver notifications from Home Assistant.

source/_integrations/matter.markdown

@@ -12,6 +12,7 @@ ha_category:
   - Select
   - Sensor
   - Switch
+  - Update
 ha_release: '2022.12'
 ha_iot_class: Local Push
 ha_config_flow: true
@@ -188,8 +189,8 @@ This guide describes how to add a new device. This will use the Bluetooth connec
       - This starts the commissioning process which may take a few minutes.
    - If you're adding a test board (e.g. ESP32 running the example apps) and commissioning fails, you might need to take some actions in the Google Developer console, have a look at any instructions for your test device.
    - Once the process is complete, select **Done**.
-5. To view the device details, go to {% my integrations title="**Settings** > **Devices & services**" %} and select the **Matter** integration.
-6. By default, the device gets a factory specified name. To rename it, on the device page, select the pencil to edit and rename the device.
+5. To view the device details, go to {% my integrations title="**Settings** > **Devices & Services**" %} and select the **Matter** integration.
+6. By default, the device gets a factory specified name. To rename it, on the device page, select the pencil {% icon "mdi:edit" %} to edit and rename the device.
    ![image](/images/integrations/matter/matter-android-rename.png)
 7. Your device is now ready to use.
 

source/_integrations/mealie.markdown

@@ -13,12 +13,12 @@ ha_codeowners:
 ha_domain: mealie
 ha_platforms:
   - calendar
+  - diagnostics
   - sensor
   - todo
 ha_integration_type: service
 ---
 
-
 The Mealie integration will fetch data from your [Mealie instance](https://mealie.io/).
 
 ## Prerequisites
@@ -145,7 +145,7 @@ template:
         unique_id: mealie_dinner_today
         state: >
           {% for meal in result.mealplan if meal.entry_type == "dinner" -%}
-          {{ meal.recipe['name'] if meal.recipe is not none else meal.title }}
+          {{ meal.recipe['name'] if meal.recipe is not none else meal.title -}}
           {{ ", " if not loop.last }}
           {%- endfor %}
 ```

source/_integrations/mini_connected.markdown

@@ -1,6 +1,6 @@
 ---
 title: MINI Connected
-description: Get the status and control your MINI vehicle, using the BMW Connected Drive integration
+description: Connect and control your MINI Connected devices using the BMW Connected Drive integration
 ha_category:
   - Binary sensor
   - Button
@@ -13,15 +13,14 @@ ha_category:
   - Sensor
   - Switch
 ha_release: 2024.8
-ha_iot_class: Cloud Polling
-ha_config_flow: true
 ha_integration_type: virtual
 ha_supporting_domain: bmw_connected_drive
 ha_supporting_integration: BMW Connected Drive
+ha_domain: mini_connected
 ha_codeowners:
   - '@gerard33'
   - '@rikroe'
-ha_domain: mini_connected
+ha_config_flow: true
 ha_platforms:
   - binary_sensor
   - button
@@ -33,6 +32,7 @@ ha_platforms:
   - select
   - sensor
   - switch
+ha_iot_class: Cloud Polling
 ---
 
 {% include integrations/supported_brand.md %}

source/_integrations/modbus.markdown

@@ -5,8 +5,6 @@ ha_category:
   - Hub
 ha_release: pre 0.7
 ha_iot_class: Local Polling
-ha_codeowners:
-  - '@janiversen'
 ha_domain: modbus
 ha_platforms:
   - binary_sensor
@@ -16,7 +14,7 @@ ha_platforms:
   - light
   - sensor
   - switch
-ha_quality_scale: platinum
+ha_quality_scale: silver
 ha_integration_type: integration
 related:
   - docs: /docs/configuration/

source/_integrations/mpd.markdown

@@ -12,6 +12,7 @@ ha_integration_type: integration
 related:
   - docs: /docs/configuration/
     title: Configuration file
+ha_config_flow: true
 ---
 
 The Music Player Daemon {% term integration %} allows you to control a [Music Player Daemon](https://www.musicpd.org/) from Home Assistant. Unfortunately, it does not allow you to manipulate the playlist (add or delete songs) or add transitions between the songs.

source/_integrations/mqtt.markdown

@@ -584,6 +584,7 @@ support_url:
     'name':                'name',
     'mf':                  'manufacturer',
     'mdl':                 'model',
+    'mdl_id':              'model_id',
     'hw':                  'hw_version',
     'sw':                  'sw_version',
     'sa':                  'suggested_area',
@@ -820,7 +821,8 @@ Setting up a sensor with multiple measurement values requires multiple consecuti
       ],
       "name":"Bedroom",
       "manufacturer": "Example sensors Ltd.",
-      "model": "K9",
+      "model": "Example Sensor",
+      "model_id": "K9",
       "serial_number": "12AE3010545",
       "hw_version": "1.01a",
       "sw_version": "2024.1.0",
@@ -955,6 +957,7 @@ Setting up a [light that takes JSON payloads](/integrations/light.mqtt/#json-sch
       "name": "Kitchen",
       "mf": "Bla electronics",
       "mdl": "xya",
+      "mdl_id": "ABC123",
       "sw": "1.0",
       "sn": "ea334450945afc",
       "hw": "1.0rev2",
@@ -1175,7 +1178,8 @@ data:
     "device": {
     "identifiers": "Acurite-986-1R-51778",
     "name": "Bathroom",
-    "model": "Acurite-986",
+    "model": "Acurite",
+    "model_id": "986",
     "manufacturer": "rtl_433" }
     }
 ```

source/_integrations/nexity.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/notify.mqtt.markdown

@@ -93,6 +93,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/number.mqtt.markdown

@@ -87,6 +87,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/omnilogic.markdown

@@ -7,10 +7,6 @@ ha_category:
 ha_release: 0.116
 ha_iot_class: Cloud Polling
 ha_config_flow: true
-ha_codeowners:
-  - '@oliver84'
-  - '@djtimca'
-  - '@gentoosu'
 ha_domain: omnilogic
 ha_platforms:
   - sensor

source/_integrations/onkyo.markdown

@@ -52,7 +52,7 @@ max_volume:
   default: 100
   type: integer
 receiver_max_volume:
-  description: The maximum volume of the receiver. For older Onkyo receivers this was 80, newer Onkyo receivers use 200.
+  description: The number of steps it takes for the receiver to go from the lowest to the highest possible volume. Possible values are 50, 80, 100, 200. For older Onkyo receivers, this typically is 80; newer Onkyo receivers use 200.
   required: false
   default: 80
   type: integer
@@ -91,22 +91,6 @@ List of source names:
 - `xm`
 - `sirius`
 
-If your source is not listed above, and you want to figure out how to format that source name so you can map its entry, you can use the `onkyo-eiscp` Python module to discover the exact naming needed. First, change your receiver's source to the one that you need to define, and then run:
-
-```bash
-onkyo --host 192.168.0.100 source=query
-```
-
-If this returns multiple, comma-separated values, use the first one. For example, if `dvd,bd,dvd` is returned, use `dvd`.
-
-To find your receivers max volume use the onkyo-eiscp Python module set the receiver to its maximum volume
-(don't do this whilst playing something!) and run:
-
-```bash
-onkyo --host 192.168.0.100 volume=query
-unknown-model: master-volume = 191
-```
-
 ### Action `onkyo_select_hdmi_output`
 
 Changes HDMI output of your receiver

source/_integrations/opower.markdown

@@ -75,7 +75,9 @@ Alternatively, you can create a new TOTP secret for your account and use the "no
 
 ### Exelon subsidiaries
 
-When using Opower with any of the Exelon subsidiaries, such as BGE, ComEd, PECO, Pepco, etc., you need to actively disable two-factor authentication. Log onto the website, select **Don't use 2FA** and **Don't ask me again**. If you have already enabled 2FA, disable it.
+When using Opower with any of the Exelon subsidiaries, such as BGE, ComEd, PECO, Pepco, etc., you need to actively disable two-factor authentication.
+Before proceeding, make sure you understand the security implications of disabling 2FA.
+Log onto the website, select **Don't use 2FA** and **Don't ask me again**. If you have already enabled 2FA, disable it.
 
 {% include integrations/config_flow.md %}
 

source/_integrations/overkiz.markdown

@@ -26,6 +26,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_domain: overkiz
 ha_dhcp: true
 ha_zeroconf: true

source/_integrations/person.markdown

@@ -32,6 +32,36 @@ In short, when you're at home, your position is determined first by stationary t
 
 You can manage persons {% my people title="via the UI from the person page inside the configuration panel" %}  or via `YAML` in your {% term "`configuration.yaml`" %} file.
 
+## Adding a person to Home Assistant
+
+If you have administrator rights, you can add other persons to Home Assistant and create them a user account. Depending on the rights you give them, they can then use Home Assistant on their own devices, can have their own dashboards, and be used in automations.
+
+1. Go to {% my people title="**Settings** > **People**" %} and select **Add person**.
+2. Enter their **Name**.
+3. Add an image if you like.
+4. Under **Allow login**, select if they should be able to log in.
+   - If they cannot log in, they do not get a user account, and they cannot do much with Home Assistant.
+   - They cannot have their own dashboard, for example.
+   - But they can still be used for device tracking and show up on a map and be used in automations.
+5. If they are able to log in, fill in the user information.
+   - Check if the user name is correct. A suggestion is made based on the person name. But they do not have to be identical.
+     - The username is required to log in.
+     - The person name is the name displayed in the UI.
+   - Enter a password and store it in a safe location.
+   - Define if they should have **Local access only**.
+     - If this is enabled, they won't have access to Home Assistant when they are outside your network, for example from their phone.
+   - Define if they should have **Administrator** rights.
+   - Select **Create**.
+6. If you have already set up devices for [presence detection](/getting-started/presence-detection/), **select the devices that belong to this person**.
+
+### Customizing the picture for a person
+
+You can easily upload a picture in the frontend. Simply click on a person, select or drop an image in the input field, and then crop it.
+
+<lite-youtube videoid="rOlRnwaaT7Y" videotitle="Changing a profile picture" posterquality="maxresdefault"></lite-youtube>
+
+See the documentation about [hosting files](/integrations/http/#hosting-files) for more information about the `www` folder.
+
 ## Configuring the `person` integration via the Home Assistant configuration panel
 
 This integration is by default enabled, unless you've disabled or removed the [`default_config:`](/integrations/default_config/) line from your configuration. If that is the case, the following example shows you how to enable this integration manually:
@@ -90,19 +120,3 @@ person:
 ```
 
 If you change the YAML, you can reload it by calling the `person.reload` action.
-
-### Customizing the picture for a person
-
-You can easily upload a picture in the frontend. Simply click on a person, select or drop an image in the input field, and then crop it.
-
-<lite-youtube videoid="rOlRnwaaT7Y" videotitle="Changing a profile picture" posterquality="maxresdefault"></lite-youtube>
-
-You can also do this using YAML. By following the instructions on the [customizing entities](/docs/configuration/customizing-devices#entity_picture) page, you can customize the picture used for a person entity in the `customize:` section of your configuration. For example:
-
-```yaml
-customize:
-  person.ada:
-    entity_picture: "/local/ada.jpg"
-```
-
-See the documentation about [hosting files](/integrations/http/#hosting-files) for more information about the `www` folder.

source/_integrations/pinecil.markdown

@@ -1,19 +1,20 @@
 ---
 title: Pinecil
-description: Instructions on how to integrate Pinecil V2 devices in Home Assistant with the IronOS integration.
+description: Connect and control your Pinecil devices using the IronOS integration
 ha_category:
   - Sensor
-ha_iot_class: Local Polling
 ha_release: 2024.8
-ha_config_flow: true
-ha_codeowners:
-  - '@tr4nt0r'
 ha_domain: pinecil
 ha_integration_type: virtual
 ha_supporting_domain: iron_os
 ha_supporting_integration: IronOS
+ha_codeowners:
+  - '@tr4nt0r'
+ha_config_flow: true
 ha_platforms:
+  - number
   - sensor
+ha_iot_class: Local Polling
 ---
 
 {% include integrations/supported_brand.md %}

source/_integrations/rachio.markdown

@@ -17,7 +17,7 @@ ha_homekit: true
 ha_dhcp: true
 ha_platforms:
   - binary_sensor
-  - Calendar
+  - calendar
   - switch
 ha_zeroconf: true
 ha_integration_type: integration

source/_integrations/rexel.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/scene.mqtt.markdown

@@ -91,6 +91,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/select.mqtt.markdown

@@ -99,6 +99,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/sensor.mqtt.markdown

@@ -88,6 +88,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/simplefin.markdown

@@ -1,19 +1,18 @@
 ---
-title: Simplefin
+title: SimpleFin
 description: Instructions on the SimpleFIN Integration for personal finance.
 ha_category:
   - Sensor
 ha_iot_class: Cloud Polling
 ha_release: 2024.8
 ha_codeowners:
-  - '@jeeftor'
   - '@scottg489'
+  - '@jeeftor'
 ha_domain: simplefin
 ha_config_flow: true
 ha_platforms:
   - sensor
-ha_dhcp: false
-ha_integration_type: integration
+ha_integration_type: service
 ---
 
 [SimpleFIN](http://simplefin.org) allows users to share read-only financial data. This is a paid service although it is quite affordable ($1.50 a month). 

source/_integrations/simu.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/siren.mqtt.markdown

@@ -110,6 +110,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/somfy.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/switch.mqtt.markdown

@@ -101,6 +101,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/tag.mqtt.markdown

@@ -53,6 +53,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/technove.markdown

@@ -12,10 +12,12 @@ ha_codeowners:
   - '@Moustachauve'
 ha_platforms:
   - binary_sensor
+  - diagnostics
   - number
   - sensor
   - switch
 ha_integration_type: device
+ha_quality_scale: platinum
 ---
 
 The TechnoVE integration provides connectivity with TechnoVE Smart Charging Station through the station local API.

source/_integrations/tesla_fleet.markdown

@@ -34,7 +34,7 @@ When connecting your Tesla account to Home Assistant, you **must** select the `V
 
 ## Rate limits
 
-Tesla restricts open-source integrations to the ["Discovery tier"](https://developer.tesla.com/docs/fleet-api#membership-levels) which only allows for 200 vehicle data requests per day. The integration will initially poll every 90 seconds, making vehicle data requests only when the vehicle is awake, and then dynamically slow down polling based on how many vehicle data requests have been made in the last 24 hours.
+Tesla restricts open-source integrations to the ["Discovery" plan](https://developer.tesla.com/docs/fleet-api/getting-started/subscription-plans) which only allows for 200 vehicle data requests per day. The integration will initially poll every 90 seconds, making vehicle data requests only when the vehicle is awake, and then dynamically slow down polling based on how many vehicle data requests have been made in the last 24 hours.
 
 ## Entities
 

source/_integrations/tessie.markdown

@@ -25,6 +25,7 @@ ha_platforms:
   - climate
   - cover
   - device_tracker
+  - diagnostics
   - lock
   - media_player
   - number
@@ -33,13 +34,14 @@ ha_platforms:
   - switch
   - update
 ha_integration_type: integration
+ha_quality_scale: platinum
 ---
 
-The Tessie integration exposes various commands and sensors from the Tesla vehicles connected to your [Tessie](https://my.tessie.com/) account.
+The Tessie integration exposes various commands and sensors from the Tesla vehicles and energy products connected to your [Tessie](https://tessie.com/) subscription.
 
 ## Prerequisites
 
-You must have a [Tessie](https://my.tessie.com/) account, generate a [Tessie Access Token](https://my.tessie.com/settings/api) and grant Tessie access to your Tesla vehicle by generating a [Tesla Virtual Key](https://www.tesla.com/_ak/tessie.com).
+You must have an active [Tessie](https://my.tessie.com/) subscription, generate a [Tessie Access Token](https://my.tessie.com/settings/api) and grant Tessie access to your Tesla vehicle by generating a [Tesla Virtual Key](https://www.tesla.com/_ak/tessie.com).
 
 {% include integrations/config_flow.md %}
 

source/_integrations/text.mqtt.markdown

@@ -95,6 +95,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/ubiwizz.markdown

@@ -28,6 +28,7 @@ ha_codeowners:
   - '@tetienne'
   - '@nyroDev'
   - '@tronix117'
+  - '@alexfp14'
 ha_config_flow: true
 ha_platforms:
   - alarm_control_panel

source/_integrations/update.mqtt.markdown

@@ -92,6 +92,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false

source/_integrations/vacuum.mqtt.markdown

@@ -84,6 +84,10 @@ device:
       description: The model of the device.
       required: false
       type: string
+    model_id:
+      description: The model identifier of the device.
+      required: false
+      type: string
     name:
       description: The name of the device.
       required: false