diff --git a/source/_integrations/dlink.markdown b/source/_integrations/dlink.markdown
index e604a87b619..2ceeb1612fd 100644
--- a/source/_integrations/dlink.markdown
+++ b/source/_integrations/dlink.markdown
@@ -5,53 +5,24 @@ ha_category:
   - Switch
 ha_iot_class: Local Polling
 ha_release: 0.14
+ha_config_flow: true
 ha_domain: dlink
 ha_platforms:
   - switch
-ha_integration_type: integration
+ha_codeowners:
+  - '@tkdrob'
+ha_integration_type: device
 ---
 
-The `dlink` switch platform allows you to control the state of your [D-Link Wi-Fi Smart Plugs](https://us.dlink.com/en/consumer/smart-home).
+The D-Link Wi-Fi Smart Plugs integration allows you to control the state of your [D-Link Wi-Fi Smart Plugs](https://us.dlink.com/en/consumer/smart-home).
+
+{% include integrations/config_flow.md %}
 
 Supported devices (tested):
 
 - DSP-W215
 - DSP-W110
 
-To use your D-Link smart plugs in your installation, add the following to your `configuration.yaml` file:
+Password: The default password is the PIN included on the configuration card or on the back of the unit.
 
-```yaml
-# Example configuration.yaml entry
-switch:
-  - platform: dlink
-    host: IP_ADRRESS
-    username: YOUR_USERNAME
-    password: YOUR_PASSWORD
-```
-
-{% configuration %}
-host:
-  description: "The IP address of your D-Link plug, e.g., 192.168.1.32."
-  required: true
-  type: string
-name:
-  description: The name to use when displaying this switch.
-  required: false
-  default: D-link Smart Plug W215
-  type: string
-username:
-  description: The username for your plug.
-  required: true
-  default: admin
-  type: string
-password:
-  description: The password for your plug.
-  required: true
-  default: The default password is the `PIN` included on the configuration card.
-  type: string
-use_legacy_protocol:
-  description: Enable limited support for legacy firmware protocols (Tested with v1.24, v1.26).
-  required: false
-  default: false
-  type: boolean
-{% endconfiguration %}
+Use the legacy protocol in case the integration does not work. This enables limited support for legacy firmware protocols (Tested with v1.24, v1.26). Data such as power consumption will not be available. The temperature will also show a freezing level.