diff --git a/source/_components/smarty.markdown b/source/_components/smarty.markdown new file mode 100644 index 00000000000..cf7caa1f13c --- /dev/null +++ b/source/_components/smarty.markdown @@ -0,0 +1,55 @@ +--- +layout: page +title: "Salda Smarty 2X/3X/4X P/V Ventilation" +description: "Instructions on how to integrate Salda Smarty 2X/3X/4X P/V ventilation systems into Home Assistant." +date: 2019-02-25 20:00 +sidebar: true +comments: false +sharing: true +footer: true +logo: salda.png +ha_category: + - Hub + - Fan + - Sensor +ha_release: 0.95 +--- + +The `smarty` component lets you control Salda [Smarty](http://www.salda.lt/en/products/category/compact-counter-flow-units) ventilation units from Home Assistant. You need a [MB-GATEWAY](http://www.salda.lt/en/products/item/5637227077) or something similar to connect to your local network. + +There is currently support for the following device types within Home Assistant: + +- Fan +- Sensor + +The component has a fan platform to view and control the ventilation speed, and a sensors platform to read: + +- Outdoor air temperature +- Extract air temperature +- Supply air temperature +- Extract fan speed rpm +- Supply fan speed rpm +- Alarm +- Warning +- Filter Change Timer + +## {% linkable_title Configuration %} + +To set it up, add the following information to your `configuration.yaml` file: + +```yaml +smarty: + host: 192.168.0.10 +``` + +{% configuration %} +host: + description: The IP Address of the unit. + required: true + type: string +name: + description: The name of this device as you want to see it in Home Assistant. + required: false + default: Smarty + type: string +{% endconfiguration %} diff --git a/source/images/supported_brands/salda.png b/source/images/supported_brands/salda.png new file mode 100644 index 00000000000..b9cda129a2d Binary files /dev/null and b/source/images/supported_brands/salda.png differ