From 33ad6098efe060604bdc76ab01f3eec086d98556 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=D0=98=D0=BB=D1=8C=D1=8F=20Pupko?= <1714445+ILAsoft@users.noreply.github.com> Date: Sat, 26 Dec 2020 03:41:00 -0800 Subject: [PATCH] Binary Sensor link fixed for envisalink (#16013) Co-authored-by: Fabian Affolter --- source/_integrations/envisalink.markdown | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/source/_integrations/envisalink.markdown b/source/_integrations/envisalink.markdown index 70b37f4f5b3..b5ec83cfe76 100644 --- a/source/_integrations/envisalink.markdown +++ b/source/_integrations/envisalink.markdown @@ -16,7 +16,7 @@ Please visit the [eyezon website](http://www.eyezon.com/) for further informatio There is currently support for the following device types within Home Assistant: -- Binary Sensor: Reports on zone status (Check the [type/class](/integrations/binary_sensor/) list for a possible visualization of your zone.) +- Binary Sensor: Reports on zone status (Check the [type/class](/integrations/binary_sensor/#device-class) list for a possible visualization of your zone.) - Sensor: Emulates an alpha-numeric keypad attached to the alarm panel - Alarm Control Panel: Reports on partition status, and can be used to arm/disarm the system @@ -70,7 +70,7 @@ password: required: true type: string code: - description: Your alarm panel's code, for authenticating user input during arm/disarm. If you do not provide this value, the integration will prompt the user to enter the code at runtime. + description: Your alarm panel's code, for authenticating user input during arm/disarm. If you do not provide this value, the integration will prompt the user to enter the code at runtime. required: false type: string port: @@ -104,7 +104,7 @@ panic_type: default: Police type: string zones: - description: "Envisalink boards have no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. For more information on the available zone types, take a look at the [Binary Sensor](/integrations/envisalink) documentation. *Note: If no zones are specified, Home Assistant will not load any binary_sensor components.*" + description: "Envisalink boards have no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. For more information about the visual representation of a zone, take a look at the [Binary Sensor](/integrations/binary_sensor/#device-class) documentation. *Note: If no zones are specified, Home Assistant will not load any binary_sensor components.*" required: false type: integer keys: