jeans/home-assistant.io
jeans/home-assistant.io
1
0
Fork 0
mirror of https://github.com/home-assistant/home-assistant.io.git synced 2025-07-18 23:06:58 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update arcam_fmj.markdown with standby power option (#27354)

Browse Source 
* Update arcam_fmj.markdown with standby power option

Add note about available option to configure receivers to maintain network connectivity in standby. Also, overall readability improvements and minor updates.

* Update source/_integrations/arcam_fmj.markdown

Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>

---------

Co-authored-by: c0ffeeca7 <38767475+c0ffeeca7@users.noreply.github.com>
This commit is contained in:
kernelpanic85 2023-05-11 10:51:49 -04:00 committed by GitHub
parent d37b018d4e
commit 35486056a4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 7 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
source/_integrations/arcam_fmj.markdown
View File

@ -15,7 +15,7 @@ ha_platforms:
ha_integration_type: integration ha_integration_type: integration
--- ---
The `arcam_fmj` integration allows you to control [Arcam FMJ Receivers](https://www.arcam.co.uk/range/fmj.htm) from Home Assistant. The `arcam_fmj` integration allows you to control [Arcam Receivers and Processors](https://www.arcam.co.uk/range/fmj.htm) from Home Assistant.
Supported devices: Supported devices:
@ -41,7 +41,7 @@ Supported devices:
- SA 30 - SA 30
- SR 250 - SR 250
This integration may also work with JBL and AudioControl receivers and processors as they share the same firmware as Arcam. This integration may also work with [JBL](https://www.jblsynthesis.com/products/electronics/) and [AudioControl](https://www.audiocontrol.com/home-audio/) receivers and processors as they share the same firmware as Arcam.
- SDP-55/58 - SDP-55/58
@ -49,7 +49,11 @@ This integration may also work with JBL and AudioControl receivers and processor
## Power state ## Power state
Arcam FMJ receivers turn off their network port when in standby, the component will try to reconnect to the receiver every 5 seconds. This means powering on the first zone is not possible over the built-in network connection. Two options for complete power control exists: IR or Serial gateway. Arcam receivers turn off their network port when in standby, the component will try to reconnect to the receiver every 5 seconds. This means powering on the first zone is not possible over the built-in network connection.
Note: Some newer models offer the ability to configure the device to keep the network port active when in standby mode. This can be found under **HDMI Settings** > **HDMI Bypass & IP**. Enabling **HDMI & IP On** will allow full power control from Home Assistant.
Two other options for complete power control exists: IR or Serial gateway.
### IR command ### IR command