Asuswrt config entries (#16012)

source/_integrations/asuswrt.markdown

@@ -6,6 +6,7 @@ ha_category:
   - Presence Detection
   - Sensor
 ha_release: 0.83
+ha_config_flow: true
 ha_iot_class: Local Polling
 ha_codeowners:
   - '@kennedyshead'
@@ -21,78 +22,9 @@ There is currently support for the following device types within Home Assistant:
 
 ## Configuration
 
-To use an ASUSWRT router in your installation, add the following to your `configuration.yaml` file:
+To add your ASUSWRT devices into your Home Assistant installation, go to:
 
-```yaml
+**Configuration** -> **Integrations** in the UI, click the button with `+` sign and from the list of integrations select **ASUSWRT**.
-# Example configuration.yaml entry
-asuswrt:
-  host: YOUR_ROUTER_IP
-  username: YOUR_ADMIN_USERNAME
-```
-
-{% configuration %}
-host:
-  description: "The IP address of your router, e.g., `192.168.1.1`."
-  required: true
-  type: string
-username:
-  description: "The username of a user with administrative privileges, usually `admin`."
-  required: true
-  type: string
-password:
-  description: "The password for your given admin account (use this if no SSH key is given)."
-  required: false
-  type: string
-protocol:
-  description: "The protocol (`ssh` or `telnet`) to use."
-  required: false
-  type: string
-  default: ssh
-port:
-  description: SSH port to use.
-  required: false
-  type: integer
-  default: 22
-mode:
-  description: "The operating mode of the router (`router` or `ap`)."
-  required: false
-  type: string
-  default: router
-ssh_key:
-  description: The path to your SSH private key file associated with your given admin account (instead of password).
-  required: false
-  type: string
-require_ip:
-  description: If the router is in access point mode.
-  required: false
-  type: boolean
-  default: true
-interface:
-  description: "The interface of the router that you want statistics from (e.g. eth0,eth1 etc)"
-  required: false
-  type: string
-  default: eth0
-dnsmasq:
-  description: "The location of the dnsmasq.leases files"
-  required: false
-  type: string
-  default: /var/lib/misc 
-sensors:
-  description: List of enabled sensors
-  required: false
-  type: list
-  keys:
-    "devices":
-      description: Connected devices sensor
-    "upload":
-      description: TX upload sensor
-    "download":
-      description: RX download sensor
-    "download_speed":
-      description: download mbit/s sensor
-    "upload_speed":
-      description: upload mbit/s sensor
-{% endconfiguration %}
 
 <div class='note warning'>
 
@@ -100,32 +32,29 @@ You need to enable telnet on your router if you choose to use `protocol: telnet`
 
 </div>
 
-### Example Sensor Configuration
+### Sensor Configuration
 
-To enable ASUSWRT sensors as part of your installation, reference the following example configuration:
+These sensors are automatically created in status **disabled** and associated to the router device:
 
-```yaml
+- Connected devices sensor
-# Example configuration.yaml entry
+- Download sensor (unit_of_measurement: Gigabyte - *Daily accumulation*)
-asuswrt:
+- Download Speed sensor (unit_of_measurement: Mbit/s)
-  host: YOUR_ROUTER_IP
+- Upload sensor (unit_of_measurement: Gigabyte - *Daily accumulation*)
-  username: YOUR_ADMIN_USERNAME
+- Upload Speed sensor (unit_of_measurement: Mbit/s)
-  ssh_key: /config/id_rsa
-  sensors:
-    - devices
-    - upload
-    - download
-    - upload_speed
-    - download_speed
-```
 
-The example above, creates the following sensors:
+To use ASUSWRT sensors, simply **enable** them in the devices page.
 
-- sensor.asuswrt_devices_connected
+## Integration Options
-- sensor.asuswrt_download (unit_of_measurement: Gigabyte - *Daily accumulation*)
-- sensor.asuswrt_download_speed (unit_of_measurement: Mbit/s)
-- sensor.asuswrt_upload (unit_of_measurement: Gigabyte - *Daily accumulation*)
-- sensor.asuswrt_upload_speed (unit_of_measurement: Mbit/s)
 
+It is possible to change some behaviors through the integration options. These can be changed at **ASUSWRT** -> **Options** on the Integrations page.
+
+- **Consider home**: Number of seconds that must elapse before considering a disconnected device "not at home"
+- **Track unknown**: Enable this option to track also devices that do not have a name. Name will be replaced by mac address.
+- **Interface**: The interface that you want statistics from (e.g. eth0,eth1 etc)
+- **Dnsmasq**: The location in the router of the dnsmasq.leases files
+- **Require IP**: If devices must have IP (this option is available only for access point mode)
+
+**Note**: if you don't want to automatically track new detected device, disable the integration system option `Enable new added entities` 
 
 ## Padavan custom firmware (The rt-n56u project)