Shelly unicast - remove model names and minimum firmware (#25822)

This commit is contained in:
Shay Levy 2023-01-18 11:26:19 +02:00 committed by GitHub
parent c3c0b42cb7
commit 39f8e079ca
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -49,7 +49,7 @@ There are two generations of devices. Both generations are supported by this int
Generation 1 devices use the `CoIoT` protocol to communicate with the integration. For Shelly firmware 1.10.0 or newer, `CoIoT` must be enabled in the device settings. Navigate to the local IP address of your Shelly device, **Internet & Security** >> **ADVANCED - DEVELOPER SETTINGS** and check the box **Enable CoIoT**.
We recommend using `unicast` for communication. To enable this, enter the local IP address of the Home Assistant server and port `5683` into the **CoIoT peer** field and push **SAVE** button. This is mandatory for Shelly Flood and Motion with firmware 1.1.0 or newer. After changing the **CoIoT peer**, the Shelly device needs to be manually restarted.
We recommend using `unicast` for communication. To enable this, enter the local IP address of the Home Assistant server and port `5683` into the **CoIoT peer** field and push **SAVE** button. **This is mandatory for battery operated devices**. After changing the **CoIoT peer**, the Shelly device needs to be manually restarted.
## Shelly device configuration (generation 2)