Add zwave_mqtt base (#13255)

* Add zwave_mqtt base * Fix Z-Wave casing * Mention network key * ✏️ Tweaks Co-authored-by: Franck Nijhof <git@frenck.dev>
2025-07-18 23:06:58 +00:00 · 2020-05-05 10:28:39 +02:00 · 2020-05-05 10:28:39 +02:00 · 3a3e721848
commit 3a3e721848
parent 0752df6b6e
1 changed files with 56 additions and 0 deletions
--- a/source/_integrations/zwave_mqtt.markdown
+++ b/source/_integrations/zwave_mqtt.markdown
@ -0,0 +1,56 @@
+---
+title: Z-Wave over MQTT
+description: Instructions on how to integrate Z-Wave over MQTT with Home Assistant.
+ha_category:
+  - Switch
+ha_release: "0.110"
+ha_iot_class: Local Push
+ha_config_flow: true
+ha_codeowners:
+  - '@cgarwood'
+  - '@marcelveldt'
+  - '@MartinHjelmare'
+ha_domain: zwave_mqtt
+---
+
+This integration allows you to utilize OpenZWave's qt-openzwave daemon to control a Z-Wave network over MQTT.
+
+## Requirements
+
+- MQTT server and the [MQTT integration](/integrations/mqtt/) set up in Home Assistant
+- [qt-openzwave daemon](https://github.com/OpenZWave/qt-openzwave)
+- Supported Z-Wave dongle compatible with OpenZWave 1.6. See this [list](/docs/z-wave/controllers/#supported-z-wave-usb-sticks--hardware-modules) of controllers.
+
+## Configuration
+
+This integration can be configured using the integrations in the
+Home Assistant frontend.
+
+Menu: **Configuration** -> **Integrations**.
+
+Click on the `+` sign to add an integration and click on **Z-Wave over MQTT**.
+After completing the configuration flow, the Z-Wave over MQTT
+integration will be available.
+
+### Secure network key
+
+The secure network key is set in the settings for the qt-openzwave daemon and not in the integration configuration.
+
+## Services
+
+### Service `zwave_mqtt.add_node`
+
+This service will set the controller into inclusion mode and should be used to add a device (node) to the Z-Wave network. Call the service and then perform the device-specific procedure, according to the device manual, to add your device to the network. Make sure the controller is connected to the host where the QT-OpenZwave daemon is running, when performing this operation.
+
+| Service Data Attribute | Required | Description                                                                                                                                                                                                                                      |
+| ---------------------- | -------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| `secure`               | no       | Add the new node with secure communications. [Secure network key must be set](#secure-network-key). This process will fallback to add_node (unsecure) for unsupported devices. Note that unsecure devices can't directly talk to secure devices. |
+| `instance_id`          | no       | The OZW Instance/Controller to use, defaults to 1.                                                                                                                                                                                               |
+
+### Service `zwave_mqtt.remove_node`
+
+This service will set the controller into exclusion mode and should be used to remove a device (node) from the Z-Wave network. Call the service and then perform the device-specific procedure, according to the device manual, to remove your device from the network. Make sure the controller is connected to the host where the QT-OpenZwave daemon is running, when performing this operation.
+
+| Service Data Attribute | Required | Description                                        |
+| ---------------------- | -------- | -------------------------------------------------- |
+| `instance_id`          | no       | The OZW Instance/Controller to use, defaults to 1. |