Remove digitalloggers documentation (#22369)

source/_integrations/digitalloggers.markdown

@@ -1,60 +0,0 @@
----
-title: Digital Loggers
-description: Instructions on how to integrate Digital Loggers DIN III relays into Home Assistant.
-ha_category:
-  - Switch
-ha_release: 0.35
-ha_iot_class: Local Polling
-ha_domain: digitalloggers
-ha_platforms:
-  - switch
----
-
-The `digitalloggers` switch platform allows you to control the state of your [Digital Loggers](https://www.digital-loggers.com/dinfaqs.html) switches.
-
-## Configuration
-
-To use your digitalloggers switch in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-switch:
-  - platform: digitalloggers
-    host: 192.168.1.43
-```
-
-{% configuration %}
-host:
-  description: The IP address or FQDN of your DIN III relay, e.g., `192.168.1.32` or `myrelay.example.com`.
-  required: true
-  type: string
-name:
-  description: The name to use when controlling this relay.
-  required: false
-  default: DINRelay
-  type: string
-username:
-  description: Username for controlling this relay.
-  required: false
-  default: admin
-  type: string
-password:
-  description: Password for controlling this relay.
-  required: false
-  default: admin
-  type: string
-timeout:
-  description: Override the timeout in seconds if you need to, valid range is 1 to 600.
-  required: false
-  default: 20
-  type: integer
-cycletime:
-  description: "This is the delay enforced by the library when you send multiple commands to the same device. Override it if you need to. Valid range is 1 to 600. A delay is a recommendation of Digital Loggers: Many loads draw more power when they are initially switched on. Sequencing prevents circuit overloads when loads devices are attached to a single circuit."
-  required: false
-  default: 2
-  type: integer
-{% endconfiguration %}
-
-Your relays will be available in the form `switch.fantasticrelaydevice_individualrelayname`
-
-**Note:** There is currently a limitation of the [dlipower library](https://github.com/dwighthubbard/python-dlipower) used by the `digitalloggers` integration that communication is only available over port 80.

source/_redirects

@@ -414,6 +414,7 @@
 /integrations/crimereports /more-info/removed-integration 301
 /integrations/device_tracker.trackr /more-info/removed-integration 301
 /integrations/dht /more-info/removed-integration 301
+/integrations/digitalloggers /more-info/removed-integration 301
 /integrations/duke_energy /more-info/removed-integration 301
 /integrations/edp_redy /more-info/removed-integration 301
 /integrations/ee_brightbox /more-info/removed-integration 301