Update installation-raspberry-pi-all-in-one.markdown

updated username and paths to reflect updated usage.

source/getting-started/installation-raspberry-pi-all-in-one.markdown

@@ -9,13 +9,13 @@ footer: true
 
 The [Raspberry Pi All-In-One Installer](https://github.com/home-assistant/fabric-home-assistant) deploys a complete Home Assistant server including support for MQTT with websockets, Z-Wave, and the Open-Zwave Control Panel.
 
-The only requirement is that you have a Raspberry Pi with a fresh installation of [Raspbian Jessie](https://www.raspberrypi.org/downloads/raspbian/) connected to your network.
+The only requirement is that you have a Raspberry Pi with a fresh installation of [Raspbian](https://www.raspberrypi.org/downloads/raspbian/) connected to your network.
 
 *  Login to Raspberry Pi. For example with `ssh pi@your_raspberry_pi_ip`
 *  Run the following command
 
 ```bash
-$ wget -Nnv https://raw.githubusercontent.com/home-assistant/fabric-home-assistant/master/hass_rpi_installer.sh && bash hass_rpi_installer.sh
+$ wget -Nnv https://raw.githubusercontent.com/home-assistant/fabric-home-assistant/master/hass_rpi_installer.sh && chown pi:pi hass_rpi_installer.sh && bash hass_rpi_installer.sh
 ```
 <p class='note warning'>
   Note this command is one-line and not run as sudo.
@@ -27,7 +27,7 @@ Installation will take approx. 1-2 hours depending on the Raspberry Pi model the
 
 Once rebooted, your Raspberry Pi will be up and running with Home Assistant. You can access it at [http://your_raspberry_pi_ip:8123](http://your_raspberry_pi_ip:8123).
 
-The Home Assistant configuration is located at `/home/hass/.homeassistant`. The [virtualenv](https://virtualenv.pypa.io/en/latest/) with the Home Assistant installation is located at `/srv/hass/hass_venv`. As part of the secure installation, a new user (**hass**) is added to your Raspberry Pi to run Home Assistant. This is a system account and does not have login or other abilities by design. When editing your `configuration.yaml` files, you will need to run the commands with `sudo` or by switching user.
+The Home Assistant configuration is located at `/home/hass/.homeassistant`. The [virtualenv](https://virtualenv.pypa.io/en/latest/) with the Home Assistant installation is located at `/srv/homeassistant/homeassistant_venv`. As part of the secure installation, a new user (**homeassistant**) is added to your Raspberry Pi to run Home Assistant. This is a system account and does not have login or other abilities by design. When editing your `configuration.yaml` files, you will need to run the commands with `sudo` or by switching user.
 
 <p class='note note'>
   *Windows users*: Setting up WinSCP to allow this seemlessly is at the end of this page.
@@ -41,20 +41,20 @@ The All-In-One Installer script will do the following automatically:
 *  Create needed service accounts
 *  Install OS and Python dependencies
 *  Setup a python virtualenv to run Home Assistant and components inside.
-*  Run as `hass` service account
+*  Run as `homeassistant` service account
 *  Install Home Assistant in a virtualenv
-*  Build and install Mosquitto v1.4.9 from source with websocket support running on ports 1883 and 9001
+*  Install Mosquitto with websocket support running on ports 1883 and 9001
 *  Build and Install Python-openzwave in the Home Assistant virtualenv
-*  Build openzwave-control-panel in `/srv/hass/src/open-zwave-control-panel`
+*  Build openzwave-control-panel in `/srv/homeassistant/src/open-zwave-control-panel`
-*  Add both Home Assistant and Mosquitto to systemd services to start at boot
+*  Add Home Assistant to systemd services to start at boot
 
 ### {% linkable_title Upgrading %}
 
 To upgrade the All-In-One setup manually:
 
 *  Login to Raspberry Pi `ssh pi@your_raspberry_pi_ip`
-*  Change to hass user `sudo su -s /bin/bash hass`
+*  Change to homeassistant user `sudo su -s /bin/bash homeassistant`
-*  Change to virtual enviroment `source /srv/hass/hass_venv/bin/activate`
+*  Change to virtual enviroment `source /srv/homeassistant/homeassistant_venv/bin/activate`
 *  Update HA `pip3 install --upgrade homeassistant`
 *  Type `exit` to logout the hass user and return to the `pi` user.
   
@@ -75,7 +75,7 @@ To launch the OZWCP web application:
 
 *  Make sure Home Assistant is not running! So stop that first
 *  Login to Raspberry Pi `ssh pi@your_raspberry_pi_ip`
-*  Change to the ozwcp directory `cd /srv/hass/src/open-zwave-control-panel/`
+*  Change to the ozwcp directory `cd /srv/homeassistant/src/open-zwave-control-panel/`
 *  Launch the control panel `sudo ./ozwcp -p 8888`
 *  Open a web browser to `http://your_pi_ip:8888`
 *  Specify your zwave controller, for example `/dev/ttyACM0` and hit initialize