diff --git a/source/_integrations/zha.markdown b/source/_integrations/zha.markdown
index 1e520cc7b3b..5f4c38206d6 100644
--- a/source/_integrations/zha.markdown
+++ b/source/_integrations/zha.markdown
@@ -78,7 +78,7 @@ Some other Zigbee coordinator hardware may not support a firmware that is capabl
   - [Elelabs Zigbee Raspberry Pi Shield](https://elelabs.com/products/elelabs_zigbee_shield.html) (Note! Not a must but recommend [upgrade the EmberZNet NCP application firmware](https://github.com/Elelabs/elelabs-zigbee-ezsp-utility))
   - Bitron Video/Smabit BV AV2010/10 USB-Stick with Silicon Labs Ember 3587
   - Telegesis ETRX357USB/ETRX357USB-LR/ETRX357USB-LRS+8M (Note! These first have to be [flashed with other EmberZNet firmware](https://github.com/walthowd/husbzb-firmware))
-- Texas Instruments based radios with Z-Stack 3.x.x (via the [zigpy-znp](https://github.com/zha-ng/zigpy-znp) library for zigpy)
+- Texas Instruments based radios (via the [zigpy-znp](https://github.com/zigpy/zigpy-znp) library for zigpy)
   - [CC2652P/CC2652R/CC2652RB USB stick or dev board hardware flashed with Z-Stack 3.x.x coordinator firmware](https://www.zigbee2mqtt.io/information/supported_adapters)
   - [CC1352P/CC1352R USB stick or dev board hardware flashed with Z-Stack 3.x.x coordinator firmware](https://www.zigbee2mqtt.io/information/supported_adapters)
   - [CC2538 USB stick or dev board hardware flashed with Z-Stack 3.x.x coordinator firmware](https://www.zigbee2mqtt.io/information/supported_adapters)
@@ -101,13 +101,6 @@ it is expected to see `NCP entered failed state. Requesting APP controller resta
 
 </div>
 
-### Experimental support for additional Zigbee radio modules
-
-- Texas Instruments based radios with Z-Stack Home 1.2.x (via the [zigpy-cc](https://github.com/zigpy/zigpy-cc) library for zigpy)
-  - [CC2531 USB stick hardware flashed with Z-Stack Home 1.2.x coordinator firmware](https://www.zigbee2mqtt.io/information/supported_adapters)
-  - [CC2530 + CC2591/CC2592 USB stick hardware flashed with Z-Stack Home 1.2.x coordinator firmware](https://www.zigbee2mqtt.io/information/supported_adapters)
-  - [CC2538 + CC2592 dev board hardware flashed with Z-Stack Home 1.2.x coordinator firmware](https://www.zigbee2mqtt.io/information/supported_adapters)
-
 ## Configuration - GUI
 
 Connect your radio module and restart Home Assistant.
@@ -131,8 +124,8 @@ a new pop-up asking for a radio type. In the pop-up:
 | ------------- | ------------- |
 | `ezsp`  | Silicon Labs EmberZNet protocol (e.g., Elelabs, HUSBZB-1, Telegesis) |
 | `deconz` | dresden elektronik deCONZ protocol (e.g., ConBee I/II, RaspBee I/II) |
-| `znp` | Texas Instruments new (active): Z-Stack 3.x.x ZNP protocol (e.g., CC26x2, CC13x2) |
-| `ti_cc` | Texas Instruments legacy & HA12: Z-Stack Home 1.2.x ZNP protocol (e.g., CC253x) |
+| `znp` | Texas Instruments (e.g., CC2531, CC26x2, CC13x2, zzh!, Slaesh's coordinator) |
+| `ti_cc` | Texas Instruments (legacy) |
 | `zigate` | ZiGate Serial protocol (e.g., ZiGate USB-TTL, PiZiGate, ZiGate WiFi) |
 | `xbee` | Digi XBee ZB Coordinator Firmware protocol (e.g., Digi XBee Series 2, 2C, 3) |