diff --git a/source/_integrations/nibe_heatpump.markdown b/source/_integrations/nibe_heatpump.markdown
new file mode 100644
index 00000000000..06a9f3cbbd8
--- /dev/null
+++ b/source/_integrations/nibe_heatpump.markdown
@@ -0,0 +1,78 @@
+---
+title: Nibe Heat Pump
+description: Instructions on how to integrate a Nibe Heat Pump into Home Assistant.
+ha_category:
+  - Climate
+ha_release: '2022.10'
+ha_iot_class: Local Polling
+ha_config_flow: true
+ha_codeowners:
+  - '@elupus'
+ha_domain: nibe_heatpump
+ha_ssdp: false
+ha_platforms:
+  - sensor
+  - binary_sensor
+  - number
+  - switch
+  - select
+ha_integration_type: integration
+---
+
+The Nibe Heat Pump integration allows you to control and monitor [Nibe Heat Pumps](https://www.nibe.eu/en-eu/products/heat-pumps) in Home Assistant.
+
+Supported devices:
+
+- F1145
+- F1155
+- F1245
+- F1255
+- F1345
+- F1355
+- F370
+- F470
+- F730
+- F750
+- SMO20
+- SMO40
+- VVM225
+- VVM310
+- VVM320
+- VVM325
+- VVM500
+
+{% include integrations/config_flow.md %}
+
+## Connection Methods
+
+To communicate with the pump there are a few different connection methods available depending on hardware. At the moment the following methods are supported.
+
+- [UDP Gateway using NibeGw](#udp-gateway-using-nibegw)
+
+### UDP Gateway using NibeGw
+
+The heat pump exposes an RS485 interface for communication with extensions. This can be used to speak to the pump by emulating the Nibe MODBUS40 accessory.
+
+Since the pump will go into an error state if the accessory is not responding, dedicated hardware running a gateway software is the preferable choice.
+
+This can be built using a Raspberry Pi with an RS485 hat, an Arduino with RS485 support or an ESP32 with RS485 converters.
+
+#### ESPHome
+
+A ESPHome base hardware solution also works well and integrate nicely into Home Assistant.
+
+- [Homepage](https://github.com/elupus/esphome-nibe)
+
+#### Arduino
+
+An Arduino-based solution has been tested by OpenHAB community with Arduino uno + RS485 and Ethernet shields. The ProDiNo NetBoards are also supported. A ProDiNo has an Ethernet and RS-485 port on the board.
+
+- [Documentation from OpenHAB](https://www.openhab.org/addons/bindings/nibeheatpump/#arduino)
+- [Source code in OpenHAB Contrib](https://github.com/openhab/openhab-addons/tree/main/bundles/org.openhab.binding.nibeheatpump/contrib/NibeGW/Arduino/NibeGW)
+
+#### Raspberry Pi / Linux
+
+A standard Linux application for running the Nibe Gateway software is also available.
+
+- [Documentation from OpenHAB](https://www.openhab.org/addons/bindings/nibeheatpump/#raspberry-pi-or-other-linux-unix-based-boards)
+- [Source code in OpenHAB Contrib](https://github.com/openhab/openhab-addons/tree/main/bundles/org.openhab.binding.nibeheatpump/contrib/NibeGW/RasPi)
\ No newline at end of file