diff --git a/source/_components/thermostat.heatmiser.markdown b/source/_components/thermostat.heatmiser.markdown
new file mode 100644
index 00000000000..a3bff2cf420
--- /dev/null
+++ b/source/_components/thermostat.heatmiser.markdown
@@ -0,0 +1,38 @@
+---
+layout: component
+title: "Heatmiser thermostat"
+description: "Instructions how to integrate Heatmiser thermostats within Home Assistant."
+date: 2015-12-11 12:35
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: heatmiser.png
+ha_category: Thermostat
+---
+
+
+The heatmiser thermostat platform let you control [Heatmiser DT/DT-E/PRT/PRT-E](http://www.heatmisershop.co.uk/heatmiser-slimline-programmable-room-thermostat/) thermostats from Heatmiser.  The module itself is currently setup to work over a RS232 -> RS485 converter, therefore it connects over IP.
+
+To set it up, add the following information to your `configuration.yaml` file:
+
+```yaml
+thermostat:
+  platform: heatmiser
+  ipaddress: YOUR_IPADDRESS
+  port:  YOUR_PORT
+  tstats:
+    1:
+    id: THERMOSTAT_ID
+    name: THERMOSTAT_NAME
+```
+
+A single interface can handle up to 32 connected devices.
+
+Configuration variables:
+
+- **ipaddress** (*Required*): The ip address of your interface.
+- **port** (*Required*): The port that the interface is listening on.
+- **tstats** (*Required*): A list of thermostats activated on the gateway.
+- **id** (*Required*): The id of the thermostat as configured on the device itself
+- **name** (*Required*): A friendly name for the themostat
\ No newline at end of file
diff --git a/source/images/supported_brands/heatmiser.png b/source/images/supported_brands/heatmiser.png
new file mode 100644
index 00000000000..f840ed757a0
Binary files /dev/null and b/source/images/supported_brands/heatmiser.png differ