From 4578dda954f8f8af58d6dbb654d642e035127681 Mon Sep 17 00:00:00 2001 From: starkillerOG Date: Sat, 23 Nov 2024 17:02:29 +0100 Subject: [PATCH] Add Reolink removal instructions (#35935) --- source/_integrations/reolink.markdown | 30 +++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/source/_integrations/reolink.markdown b/source/_integrations/reolink.markdown index 737e1a53927..0ecb83deae6 100644 --- a/source/_integrations/reolink.markdown +++ b/source/_integrations/reolink.markdown @@ -421,6 +421,36 @@ Then power up the camera while pointing it at the QR code. It takes about a minu Set up the Reolink integration in Home Assistant using the credentials you set in step 1. +## Remove integration + +### Removing a directly connected camera/NVR/Home Hub + +Removing a directly connected camera/NVR/Home Hub can be done by removing the integration following these steps: + +{% include integrations/remove_device_service.md %} + +This will also remove all cameras/chimes connected to the NVR/Home Hub from Home Assistant. + +### Removing a camera from a NVR/Home Hub + +Removing a camera from a NVR/Home Hub can be done by deleting the device following these steps: + +1. First physically disconnect the ethernet cable of the camera from the NVR if the camera is directly connected to the NVR (PoE). +2. Then remove the camera from the NVR/Home Hub following the [NVR instructions](https://support.reolink.com/hc/en-us/articles/900003769346-How-to-delete-offline-camera-information-on-Channel-Management-Page-via-Reolink-NVR-New-UI-/) or [Home Hub instructions](https://support.reolink.com/hc/en-us/articles/33883674141977-How-to-Change-Camera-Order-Remove-Device-from-Reolink-Home-Hub/). +3. Go to {% my integrations title="**Settings** > **Devices & services**" %} and select the integration card. +4. From the list of integration entries, select the **x devices** underneath the integration instance of the NVR/Home Hub from which you want to remove a camera. +5. Select the camera you want to remove from the list of devices +6. Underneath the **Device info**, select the three-dot {% icon "mdi:dots-vertical" %} menu. Then, select **Delete**. + +### Removing a chime + +Removing a chime from a doorbell can be done by deleting the chime following these steps: + +1. Go to {% my integrations title="**Settings** > **Devices & services**" %} and select the integration card. +2. From the list of integration entries, select the **x devices** underneath the integration instance of the Doorbell/NVR/Home Hub from which you want to remove a chime. +3. Select the chime you want to remove from the list of devices +4. Underneath the **Device info**, select the three-dot {% icon "mdi:dots-vertical" %} menu. Then, select **Delete**. + ## Showing the camera in the dashboard 1. One way to show the camera in the dashboard is by using the picture glance card.