Remove deprecated Bosch BME680 Environmental Sensor integration (#21812)

source/_integrations/bme680.markdown

@@ -1,243 +0,0 @@
----
-title: Bosch BME680 Environmental Sensor
-description: Instructions on how to integrate a BME680 sensor into Home Assistant.
-ha_category:
-  - DIY
-ha_release: 0.62
-ha_iot_class: Local Push
-ha_domain: bme680
-ha_platforms:
-  - sensor
----
-
-<div class='note warning'>
-
-This integration is deprecated and will be removed in Home Assistant Core 2022.4.
-
-For more information see: [Architectural Decision Record 0019](https://github.com/home-assistant/architecture/blob/master/adr/0019-GPIO.md).
-
-</div>
-
-The `bme680` sensor platform allows you to read temperature, humidity, pressure and gas resistance values of a [Bosch BME680 Environmental sensor](https://cdn-shop.adafruit.com/product-files/3660/BME680.pdf) connected via an [I2C](https://en.wikipedia.org/wiki/I²C) bus (SDA, SCL pins). It allows you to use all the operation modes of the sensor described in its datasheet. In addition, it includes a basic air quality calculation that uses gas resistance and humidity measurements to calculate a percentage based air quality measurement.
-
-Tested devices:
-
-- [Raspberry Pi](https://www.raspberrypi.org/)
-
-## Configuration
-
-To use your BME680 sensor in your installation, add the following to your `configuration.yaml` file:
-
-```yaml
-# Example configuration.yaml entry
-sensor:
-  - platform: bme680
-```
-
-{% configuration %}
-name:
-  description: The name of the sensor
-  required: false
-  default: BME680 Sensor
-  type: string
-i2c_bus:
-  description: I2C bus that the sensor is connected to.
-  required: false
-  default: 1
-  type: integer
-i2c_address:
-  description: I2C address of the sensor. It is 0x76 or 0x77.
-  required: false
-  default: 0x77
-  type: integer
-monitored_conditions:
-  description: Conditions to monitor.
-  required: false
-  default:
-    - temperature
-    - humidity
-    - pressure
-    - airquality
-  type: list
-  keys:
-    temperature:
-      description: Monitor temperature.
-    humidity:
-      description: Monitor relative humidity.
-    pressure:
-      description: Monitor pressure.
-    gas:
-      description: Monitor gas resistance values on the VOC sensor.
-    airquality:
-      description: Monitor air quality using the values of humidity and gas resistance and calculate a percentage based air quality measurement.
-oversampling_temperature:
-  description: Oversampling multiplier as described in the sensor datasheet. Can be 0 (no sampling), 1, 2, 4, 8, or 16.
-  required: false
-  default: 8
-  type: integer
-oversampling_pressure:
-  description: Oversampling multiplier as described in the sensor datasheet. Can be 0 (no sampling), 1, 2, 4, 8, or 16.
-  required: false
-  default: 2
-  type: integer
-oversampling_humidity:
-  description: Oversampling multiplier as described in the sensor datasheet. Can be 0 (no sampling), 1, 2, 4, 8, or 16.
-  required: false
-  default: 4
-  type: integer
-filter_size:
-  description: IIR filter size as described in the sensor datasheet. Can be 0 (off), 1, 3, 7, 15, 31, 63 or 127.
-  required: false
-  default: 3
-  type: integer
-gas_heater_temperature:
-  description: The temperature to heat the hotplate to for gas resistance measurements as described in the sensor datasheet.  Can be between 200-400&deg;C.
-  required: false
-  default: 320
-  type: integer
-gas_heater_duration:
-  description: The duration to heat the hotplate in milliseconds for gas resistance measurements as described in the sensor datasheet.  Can be between 1-4032 ms. In reality, you will likely need between 80-100ms to reach a stable temperature.  Using a duration greater than 1000ms is inadvisable as it will essentially result in the heater being continually on due to the 1-second update interval.
-  required: false
-  default: 150
-  type: integer
-aq_burn_in_time:
-  description: The duration to perform gas resistance measurements to establish a stable baseline measurements for Air Quality calculations in seconds. The burn in time is only performed when the sensor integration is first initialized.
-  required: false
-  default: 300
-  type: integer
-aq_humidity_baseline:
-  description: The baseline *ideal* relative humidity value for the air quality calculations.
-  required: false
-  default: 40
-  type: integer
-aq_humidity_bias:
-  description: The bias for humidity to the gas resistance measurement in the air quality calculations expressed as a percentage of the total calculation e.g., 25% humidity to 75% gas.
-  required: false
-  default: 25
-  type: integer
-temp_offset:
-  description: "The temperature for the sensor will always be too high as it pulls heat from the components around it. Consider adding a negative offset to ensure the sensor returns an accurate temperature. Note: This value is in celsius."
-  required: false
-  default: 0
-  type: float
-{% endconfiguration %}
-
-## Full Examples
-
-If you want to specify the working mode of the digital sensor or need to change the default I2C address (which is 0x77), add more details to the `configuration.yaml` file:
-
-```yaml
-# Example of customized configuration.yaml entry
-sensor:
-  - platform: bme680
-    name: BME680 Sensor
-    i2c_bus: 1
-    i2c_address: 0x77
-    monitored_conditions:
-      - temperature
-      - humidity
-      - pressure
-      - gas
-      - airquality
-    oversampling_temperature: 8
-    oversampling_humidity: 2
-    oversampling_pressure: 4
-    filter_size: 3
-    gas_heater_temperature: 320
-    gas_heater_duration: 150
-    aq_burn_in_time: 300
-    aq_humidity_baseline: 40
-    aq_humidity_bias: 25
-    temp_offset: -5.5
-```
-
-## Customizing the sensor data
-
-Give the values friendly names and icons, add the following to your `customize:` section.
-
-```yaml
-# Example configuration.yaml entry
-customize:
-  sensor.bme680_sensor_temperature:
-    icon: mdi:thermometer
-    friendly_name: Temperature
-  sensor.bme680_sensor_humidity:
-    icon: mdi:water
-    friendly_name: Humidity
-    device_class: humidity
-    unit_of_measurement: "%"
-  sensor.bme680_sensor_pressure:
-    icon: mdi:gauge
-    friendly_name: Pressure
-  sensor.bme680_sensor_air_quality:
-    icon: mdi:blur
-    friendly_name: Air Quality
-    device_class: pm25
-    unit_of_measurement: "%"
-```
-
-To create a group, add the following to your `group` section.
-
-```yaml
-# Example configuration.yaml entry
-group:
-  climate:
-    name: Climate
-    entities:
-      - sensor.bme680_sensor_temperature
-      - sensor.bme680_sensor_humidity
-      - sensor.bme680_sensor_pressure
-      - sensor.bme680_sensor_air_quality
-```
-
-## Directions for enabling I2C interface on the Home Assistant Operating System
-
-Follow the instructions here to [enable I2C here.](/hassio/enable_i2c/).
-
-## Directions for installing SMBus support on Raspberry Pi
-
-Enable I2C interface with the Raspberry Pi configuration utility:
-
-```bash
-# pi user environment: Enable I2C interface
-sudo raspi-config
-```
-
-Select `Interfacing options->I2C` choose `<Yes>` and hit `Enter`, then go to `Finish` and you'll be prompted to reboot.
-
-Install dependencies to use the `smbus-cffi` module and add your `homeassistant` user to the _i2c_ group:
-
-```bash
-# pi user environment: Install I2C dependencies and utilities
-sudo apt-get install build-essential libi2c-dev i2c-tools python-dev libffi-dev
-
-# pi user environment: Add homeassistant user to the I2C group
-sudo addgroup homeassistant i2c
-
-# pi user environment: Reboot Raspberry Pi to apply changes
-sudo reboot
-```
-
-### Check the I2C address of the sensor
-
-After installing `i2c-tools`, a new utility is available to scan the addresses of the connected sensors:
-
-```bash
-/usr/sbin/i2cdetect -y 1
-```
-
-It will output a table like this:
-
-```text
-     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
-00:          -- -- -- -- -- -- -- -- -- -- -- -- --
-10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-30: -- -- -- -- -- -- -- -- -- -- -- -- 3c -- -- --
-40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
-70: -- -- -- -- -- -- -- 76
-```
-
-So you can see the sensor address that you are looking for is **0x76** (there is another I2C device on that Raspberry Pi).

source/_redirects

@@ -636,7 +636,6 @@
 /components/sensor.bitcoin /integrations/bitcoin
 /components/sensor.blink /integrations/blink
 /components/sensor.blockchain /integrations/blockchain
-/components/sensor.bme680 /integrations/bme680
 /components/sensor.bmw_connected_drive /integrations/bmw_connected_drive
 /components/sensor.broadlink /integrations/broadlink#sensor
 /components/sensor.brottsplatskartan /integrations/brottsplatskartan
@@ -1132,7 +1131,6 @@
 /components/bluesound /integrations/bluesound
 /components/bluetooth_le_tracker /integrations/bluetooth_le_tracker
 /components/bluetooth_tracker /integrations/bluetooth_tracker
-/components/bme680 /integrations/bme680
 /components/bmw_connected_drive /integrations/bmw_connected_drive
 /components/braviatv /integrations/braviatv
 /components/broadcast /integrations/telegram_broadcast
@@ -2359,6 +2357,9 @@
 /components/light.piglow /more-info/removed-integration 301
 /components/piglow /more-info/removed-integration 301
 /integrations/piglow /more-info/removed-integration 301
+/components/bme680 /more-info/removed-integration 301
+/components/sensor.bme680 /more-info/removed-integration 301
+/integrations/bme680 /more-info/removed-integration 301
 /components/htu21d /more-info/removed-integration 301
 /components/sensor.htu21d /more-info/removed-integration 301
 /integrations/htu21d /more-info/removed-integration 301