From 4683f326518ea5cf385b6d9dff0d4617b49e597e Mon Sep 17 00:00:00 2001 From: Fabian Affolter Date: Sat, 17 Nov 2018 11:50:07 +0100 Subject: [PATCH] Minor changes --- source/hassio/zwave.markdown | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/source/hassio/zwave.markdown b/source/hassio/zwave.markdown index 9f143fbea96..f111af73589 100644 --- a/source/hassio/zwave.markdown +++ b/source/hassio/zwave.markdown @@ -18,7 +18,7 @@ zwave: ### {% linkable_title RAZBERRY BOARD %} -If you need GPIO on Raspberry Pi 3 for your Z-Wave module, add the following line into `config.txt` (you have to access that on the SD card directly; simply plug it into your PC and edit it there. The 'config.txt' is not accessible from Ubuntu, you may need to open the SD Card in windows.): +If you need GPIO on Raspberry Pi 3 for your Z-Wave module, add the following line into `config.txt` (you have to access that on the SD card directly. Simply plug it into your PC and edit it there. The `config.txt` is not accessible from your Linux system, you may need to open the SD card on a Windows system.): ``` dtoverlay=pi3-miniuart-bt @@ -44,7 +44,7 @@ zha: ### {% linkable_title Finding the path %} -If the above defaults don't work, you can check what hardware has been found using the [hassio command](/hassio/commandline/#hardware): +If the above defaults don't work, you can check what hardware has been found using the [`hassio` command](/hassio/commandline/#hardware): ```bash $ hassio hardware info