mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-24 09:46:59 +00:00
Update configuration example (fix #192)
This commit is contained in:
parent
1196414387
commit
4735114d53
@ -12,20 +12,22 @@ ha_category: Rollershutter
|
||||
---
|
||||
|
||||
|
||||
This platform enables the possibility to control an MQTT rollershutter. The device state will be updated only after receiving the a new state from `state_topic`. If these messages are published with RETAIN flag, the MQTT device will receive an instant state update after subscription and will start with correct state. Otherwise, the initial state will be `unknown`.
|
||||
The `mqtt` rollershutter platform enables the possibility to control an MQTT rollershutter. The device state will be updated only after receiving the a new state from `state_topic`. If these messages are published with RETAIN flag, the MQTT device will receive an instant state update after subscription and will start with correct state. Otherwise, the initial state will be `unknown`.
|
||||
|
||||
There is a state attribute that stores the relative position of the device, where 0% means the device is `closed` and all other intermediate positions means the device is `open`.
|
||||
|
||||
To enable this platform, add the following lines to your `configuration.yaml`:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
motor:
|
||||
rollershutter:
|
||||
platform: mqtt
|
||||
name: "Bedroom Rollershutter"
|
||||
state_topic: "home/bedroom/rollershutter"
|
||||
command_topic: "home/bedroom/rollershutter/set"
|
||||
qos: 0
|
||||
payload_open: "OPEN"
|
||||
payload_close: "CLOSE"
|
||||
payload_up: "OPEN"
|
||||
payload_down: "CLOSE"
|
||||
payload_stop: "STOP"
|
||||
value_template: '{% raw %}{{ value.x }}{% endraw %}'
|
||||
```
|
||||
@ -37,7 +39,7 @@ Configuration variables:
|
||||
- **name** (*Optional*): The name of the rollershutter. Default is 'MQTT Rollershutter'.
|
||||
- **state_topic** (*Optional*): The MQTT topic subscribed to receive state updates. If not defined, the rollershutter will be stateless, that is, no information about current position or open/closed. If defined, the received payload must be a integer between 0 and 100, that represents the percentage for fully closed and fully open, respectively.
|
||||
- **qos** (*Optional*): The maximum QoS level of the state topic. Default is 0. This QoS will also be used to publishing messages.
|
||||
- **payload_open** (*Optional*): The payload to open the rollershutter. Default is "OPEN".
|
||||
- **payload_close** (*Optional*): The payload to close the rollershutter. Default is "CLOSE".
|
||||
- **payload_up** (*Optional*): The payload to open the rollershutter. Default is "OPEN".
|
||||
- **payload_down** (*Optional*): The payload to close the rollershutter. Default is "CLOSE".
|
||||
- **payload_stop** (*Optional*): The payload to stop the rollershutter. Default is "STOP".
|
||||
- **value_template** (*Optional*): Defines a [template](/getting-started/templating/) to extract a value from the payload.
|
||||
|
Loading…
x
Reference in New Issue
Block a user