Minimize configuration sample

source/_components/axis.markdown

@@ -16,8 +16,57 @@ ha_release: "0.45"
 
 Home Assistant will automatically discover their presence on your network.
 
+## {% linkable_title Dependencies %}
+
+```bash
+$ sudo apt-get install python3-gi gir1.2-gstreamer-1.0
+```
+
+Depending on how you run Home Assistant you might be needed to symlink the `gi` module into your environment.
+
+Hassbian:
+
+```bash
+$ ln -s /usr/lib/python3/dist-packages/gi /srv/homeassistant/lib/python3.4/site-packages
+```
+
+Raspberry Pi All-In-One Installer:
+
+```bash
+$ ln -s /usr/lib/python3/dist-packages/gi /srv/homeassistant/homeassistant_venv/lib/python3.4/site-packages
+```
+
 You can also manually configure your devices by adding the following lines to your `configuration.yaml` file:
 
+```yaml
+# Example configuration.yaml entry
+axis:
+  m1065lw:
+    host: IP ADDRESS
+    include:
+      - camera
+```
+
+Configuration variables:
+
+- **device** (*Required*): Unique name for the Axis device.
+  - **host** (*Required*): The IP address to your Axis device.
+  - **username** (*Optional*): The username to your Axis device. Defaults to `root`.
+  - **password** (*Optional*): The password to your Axis device. Defaults to `pass`.
+  - **trigger_time** (*Optional*): Minimum time (in seconds) a sensor should keep its positive value. Defaults to 0.
+  - **location** (*Optional*): Physical location of your Axis device. Default not set.
+  - **include** (*Required*): This cannot be empty else there would be no use adding the device at all.
+    - **camera**: Stream MJPEG video to Home Assistant.
+    - **motion**: The built-in motion detection in Axis cameras.
+    - **vmd3**: ACAP Motion Detection app which has better algorithms for motion detection.
+    - **pir**: PIR sensor that can trigger on motion.
+    - **sound**: Sound detector.
+    - **daynight**: Certain cameras have day/night mode if they have built-in IR lights.
+    - **tampering**: Signals when camera believes that it has been tampered with.
+    - **input**: Trigger on whatever you have connected to device input port.
+
+A full configuration example could look like this:
+
 ```yaml
 # Example configuration.yaml entry
 axis:
@@ -35,45 +84,6 @@ axis:
     location: köket
 ```
 
-## {% linkable_title Dependencies %}
-
-```bash
-sudo apt-get install python3-gi gir1.2-gstreamer-1.0
-```
-
-Depending on how you run Home Assistant you might be needed to symlink the `gi` module into your environment.
-
-Hassbian:
-
-```bash
-ln -s /usr/lib/python3/dist-packages/gi /srv/homeassistant/lib/python3.4/site-packages
-```
-
-Raspberry Pi All-In-One Installer:
-
-```bash
-ln -s /usr/lib/python3/dist-packages/gi /srv/homeassistant/homeassistant_venv/lib/python3.4/site-packages
-```
-
-## {% linkable_title Configuration variables %}
-
-- **device** (*Required*): Unique name 
-- **host** (*Required*): The IP address to your Axis device.
-- **username** (*Optional*): The username to your Axis device. Default 'root'.
-- **password** (*Optional*): The password to your Axis device. Default 'pass'.
-- **trigger_time** (*Optional*): Minimum time (in seconds) a sensor should keep its positive value. Default 0.
-- **location** (*Optional*): Physical location of your Axis device. Default not set.
-
-- **include** (*Required*): This cannot be empty else there would be no use adding the device at all.
-  - **camera**: Stream MJPEG video to Home Assistant
-  - **motion**: The Built in motion detection in Axis cameras
-  - **vmd3**: ACAP Motion Detection app which has better algorithms for motion detection
-  - **pir**: PIR sensor that can trigger on motion
-  - **sound**: Sound detector
-  - **daynight**: Certain cameras have day/night mode if they have built-in IR lights
-  - **tampering**: signals when camera believes that it has been tampered with
-  - **input**: trigger on whatever you have connected to device input port
-
 <p class='note'>
 Any specific levels for triggers needs to be configured on the device.
 </p>