From 47dd6d22b1f92fe1e80db730eeffe50e8dcd705f Mon Sep 17 00:00:00 2001 From: Fabian Affolter Date: Tue, 20 Jun 2017 10:36:34 +0200 Subject: [PATCH] Add initial docs for KNX cover (#2845) --- source/_components/cover.knx.markdown | 34 +++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 source/_components/cover.knx.markdown diff --git a/source/_components/cover.knx.markdown b/source/_components/cover.knx.markdown new file mode 100644 index 00000000000..7fac76a499c --- /dev/null +++ b/source/_components/cover.knx.markdown @@ -0,0 +1,34 @@ +--- +layout: page +title: "KNX Cover" +description: "Instructions on how to integrate KXN covers with Home Assistant." +date: 2017-06-18 12:00 +sidebar: true +comments: false +sharing: true +footer: true +logo: knx.png +ha_category: DIY +ha_release: 0.48 +ha_iot_class: "Local Polling" +--- + + +The `knx` cover platform is used as in interface with KNX covers. + +To use your KNX covers in your installation, add the following to your `configuration.yaml` file: + +```yaml +# Example configuration.yaml entry +cover: + - platform: knx + updown_address: 9/0/0 + stop_address: 9/0/1 +``` + +- **updown_address** (*Required*): The KNX group address that is used to move the cover up and down. +- **stop_address** (*Required*): The group address that is used to stop the cover. +- **setposition_address** (*Optional*): The group address that is used to set the position. +- **getposition_address** (*Optional*): The group address that is used to read the position. +- **name** (*Optional*): A name for this devices used within Home Assistant. +