diff --git a/source/_integrations/homeworks.markdown b/source/_integrations/homeworks.markdown
index 5ca1291f002..fbf8fe52989 100644
--- a/source/_integrations/homeworks.markdown
+++ b/source/_integrations/homeworks.markdown
@@ -20,65 +20,6 @@ Lutron has created many systems over the years, each with their own unique inter
 
 Homeworks keypad buttons are momentary switches.  The button is pressed and released, meaning that there is no "state".  Buttons generate `homeworks_button_press` and `homeworks_button_release` events.  These events contain the "id", "name", and "button" of the button that was pressed.  "id" is derived from "name", and "button" is the number of the button on the keypad (starting at 1).
 
-## Configuration
+{% include integrations/config_flow.md %}
 
-The protocol for automatically extracting device information from the controller isn't documented, so the `homeworks` integration must be configured manually. To use Lutron Homeworks devices in your installation, add the following to your `configuration.yaml` file:
-
-``` yaml
-# Example configuration.yaml entry
-homeworks:
-  host: IP_ADDRESS
-  port: 4001
-  dimmers:
-    - addr: "[02:08:01:01]"
-      name: "Foyer Sconces"
-    - addr: "[02:08:01:02]"
-      name: "Foyer Downlights"
-      rate: 2
-
-  keypads:
-    - addr: "[02:08:02:01]"
-      name: "Foyer Keypad"
-```
-
-{% configuration %}
-host:
-  description: The IP address of the ethernet to serial adapter.  It is assumed that the adapter has been preconfigured.
-  required: true
-  type: string
-port:
-  description: The port of the ethernet to serial adapter.
-  required: true
-  type: integer
-dimmers:
-  description: List of dimmers.
-  required: false
-  type: list
-  keys:
-    addr:
-      description: The unique address of the dimmer on the controller. The quotes, brackets, and number formatting must be of the form `"[##:##:##:##]"`.
-      required: true
-      type: string
-    name:
-      description: The name of the sensor will be the title of the button +`"_"` + the name of the keypad/
-      required: true
-      type: string
-    rate:
-      description: The amount of time (in seconds) for the light to transition to a new brightness level.
-      required: false
-      type: float
-      default: 1
-keypads:
-  description: List of keypads.
-  required: false
-  type: list
-  keys:
-    addr:
-      description: The unique address of the keypad on the controller. The quotes, brackets, and number formatting must be of the form `"[##:##:##:##]"`.
-      required: true
-      type: string
-    name:
-      description: The name of the keypad.
-      required: true
-      type: string
-{% endconfiguration %}
+The protocol for automatically extracting device information from the controller isn't documented. Lights and keypads need to be added manually. This is done by configuring the integration after it has been added.