diff --git a/source/_integrations/vegehub.markdown b/source/_integrations/vegehub.markdown
new file mode 100644
index 00000000000..40d2dc4f854
--- /dev/null
+++ b/source/_integrations/vegehub.markdown
@@ -0,0 +1,94 @@
+---
+title: Vegetronix VegeHub
+description: Instructions on how to integrate a VegeHub device with Home Assistant.
+ha_category:
+  - Sensor
+  - Switch
+ha_config_flow: true
+ha_release: 2025.7
+ha_iot_class: Local Push
+ha_codeowners:
+  - '@ghowevege'
+ha_domain: vegehub
+ha_platforms:
+  - sensor
+  - switch
+ha_integration_type: integration
+related:
+  - url: https://www.vegetronix.com/Products/VG-HUB-RELAY/
+    title: VegeHub product page
+  - url: https://www.vegetronix.com/Products/VG-HUB-GEN2/QuickStart
+    title: VegeHub Quick Start Guide
+  - url: https://vegetronix.com/Products/VG-HUB-GEN2/Manual
+    title: VegeHub Manual
+---
+
+The **Vegetronix VegeHub** {% term integration %} allows you to control your [VegeHub](https://www.vegetronix.com/Products/VG-HUB-RELAY/) and gather data from its attached sensors.
+
+There is currently support for the following platforms within Home Assistant:
+
+- Sensor - Gathers data from sensor channels on a VegeHub and stores the values in Home Assistant
+- Switch - Allows you to view the status of relays on a VegeHub, and control them.
+
+{% include integrations/config_flow.md %}
+
+## Supported devices
+
+- [Vegetronix VegeHub](https://www.vegetronix.com/Products/VG-HUB-RELAY/) - Firmware **4.0 or later** - All variants
+
+## Prerequisites
+
+The VegeHub can be connected to Wi-Fi *without* the need for additional apps or cloud accounts. When powered on, the VegeHub creates a Wi-Fi access point called "Vege_XX_XX" where the XX are different for each device. Connect to this network from a phone, tablet, or other similar device. The default passphrase to connect to the access point is `vegetronix`. This can (and should) be changed in the Wi-Fi settings.
+
+Once connected to the network, you should automatically be directed by your device to log in to the network. Follow the prompt to be directed to the VegeHub's Wi-Fi setup page, where you can scan for available networks, enter your Wi-Fi network's credentials, change the device's name, and change the access point password.
+
+{% important %}
+It is crucial to change the default access point password. If you don't, anyone can easily access your VegeHub and potentially compromise your Wi-Fi network credentials.
+{% endimportant %}
+
+Select **Apply** and your VegeHub will reset the network connection and try to connect to the credentials you put in.
+
+{% include integrations/config_flow.md %}
+
+### Device settings
+
+To open the VegeHub's device settings interface on their website, go to {% my integrations title="Settings > Devices & services" %}, and on the integration card, select 1 device to open the device page. Under Device info, select Visit to open the website with the settings.
+
+## Power management
+
+The VegeHub has two power modes:
+
+- Battery mode (default): Device sleeps after five minutes of inactivity
+- Power adapter mode: Device remains always active
+
+When in Power Adapter mode, the device will use significantly more power, so this mode should not be used when powering from batteries, as they will quickly be drained.
+
+To change the power mode, visit the [Hub's settings interface](#device-settings), go to the **Settings** page, and change the **Power source** to **Power adapter**.
+
+## Troubleshooting
+
+### Device is unresponsive
+
+If the device is unresponsive, wake it up using one of these methods:
+
+- Press the button on the board.
+- Disconnect and reconnect power.
+
+### Setup is failing
+
+  - Ensure the VegeHub is awake (see Device Wake-Up section)
+
+### [Hub's settings interface](#device-settings) is not accessible
+
+  - Ensure the VegeHub is awake (see Device Wake-Up section).
+
+### Actuators are not responding
+
+  - Ensure the VegeHub is awake (see Device Wake-Up section).
+  - Consider switching to [power adapter mode](#power-management) for consistent response.
+
+## Removing the integration
+
+This integration follows standard integration removal.
+
+{% include integrations/remove_device_service.md %}