diff --git a/source/_integrations/bosch_alarm.markdown b/source/_integrations/bosch_alarm.markdown
index e580c1e25eb..adf058edcf6 100644
--- a/source/_integrations/bosch_alarm.markdown
+++ b/source/_integrations/bosch_alarm.markdown
@@ -28,6 +28,24 @@ The **Bosch Alarm Panel** {% term integration %} allows you to connect your [Bos
 
 {% include integrations/config_flow.md %}
 
+{% configuration_basic %}
+Host:
+    description: "The IP address of your panel. You can find it in your router, or within A-Link Plus / RPS."
+Port:
+    description: "The port used by your panel. This is usually 7700 unless it was changed when the panel was configured."
+Password:
+    description: "The automation code set up for your panel. This can be found within A-Link Plus or RPS. Used by the AMAX, B and G series panels."
+User code:
+    description: "The user code for the user that this integration will communicate with the panel with. This is usually the code you would use when arming or disarming the panel via a code pad. Used by the Solution series panels."
+Installer code:
+    description: "The installer code for your panel. This can be found within A-Link Plus. Used by the AMAX series panels."
+
+{% endconfiguration_basic %}
+
+{% important %}
+Since the _Mode 2_ automation user has "superuser" privileges, it bypasses the regularly configured alarm pin: you will _not_ be prompted for a _User_ code when arming/disarming through the integration.
+{% endimportant %}
+
 ## Supported devices
 
 - _Solution 2000/3000/4000_