mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-29 04:06:54 +00:00
Rename zigbee to xbee (#13438)
This commit is contained in:
Franck Nijhof
GitHub
parent
474ac51e74
commit
526322243a
@ -1,6 +1,6 @@
|
||||
---
|
||||
title: Zigbee
|
||||
description: Instructions on how to integrate a Zigbee network with Home Assistant.
|
||||
title: XBee
|
||||
description: Instructions on how to integrate a XBee with Home Assistant.
|
||||
ha_category:
|
||||
- Binary Sensor
|
||||
- Light
|
||||
@ -8,10 +8,10 @@ ha_category:
|
||||
- Switch
|
||||
ha_release: 0.12
|
||||
ha_iot_class: Local Polling
|
||||
ha_domain: zigbee
|
||||
ha_domain: xbee
|
||||
---
|
||||
|
||||
[Zigbee](https://zigbee.org/what-is-zigbee/) integration for Home Assistant allows you to utilize modules such as the [XBee](https://www.digi.com/xbee) as wireless General Purpose Input/Output (GPIO) devices. The integration requires a local Zigbee device to be connected to a serial port. Through this, it will send and receive commands to and from other devices on the Zigbee mesh network.
|
||||
[Zigbee](https://zigbee.org/what-is-zigbee/) integration for Home Assistant allows you to utilize modules such as the [XBee](https://www.digi.com/xbee) as wireless General Purpose Input/Output (GPIO) devices. The integration requires a local Xbee device to be connected to a serial port. Through this, it will send and receive commands to and from other devices on the Zigbee mesh network.
|
||||
|
||||
There is currently support for the following device types within Home Assistant:
|
||||
|
||||
@ -24,21 +24,21 @@ There is currently support for the following device types within Home Assistant:
|
||||
|
||||
The local Zigbee device (assuming XBee) must have an up to date Router or Coordinator API firmware installed.
|
||||
|
||||
A `zigbee` section must be present in the `configuration.yaml` file and contain the following options as required:
|
||||
A `xbee` section must be present in the `configuration.yaml` file and contain the following options as required:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
zigbee:
|
||||
xbee:
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
device:
|
||||
description: The serial port to which the local Zigbee device is connected.
|
||||
description: The serial port to which the local XBee device is connected.
|
||||
required: false
|
||||
type: string
|
||||
default: "`/dev/ttyUSB0`"
|
||||
baud:
|
||||
description: The baud rate at which to communicate with the local Zigbee device.
|
||||
description: The baud rate at which to communicate with the local XBee device.
|
||||
required: false
|
||||
type: integer
|
||||
default: 9600
|
||||
@ -51,21 +51,21 @@ ls /dev/ttyUSB*
|
||||
```
|
||||
|
||||
<div class='note'>
|
||||
The port may also appear as /dev/ttyACM* if you're communicating with the Zigbee device through an Arduino.
|
||||
The port may also appear as /dev/ttyACM* if you're communicating with the XBee device through an Arduino.
|
||||
</div>
|
||||
|
||||
### Example
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
zigbee:
|
||||
xbee:
|
||||
device: /dev/ttyACM1
|
||||
baud: 115200
|
||||
```
|
||||
|
||||
## Binary Sensor
|
||||
|
||||
A `zigbee` binary sensor in this context is a device connected to one of the digital input pins on a [Zigbee](https://zigbee.org/) module. The states reported by such a device are limited to `on` or `off`. By default, a binary sensor is considered `on` when the Zigbee device's digital input pin is held 'high' and considered `off` when it is held `low`. This behavior can be inverted by setting the `on_state` configuration variable to `low`.
|
||||
A `xbee` binary sensor in this context is a device connected to one of the digital input pins on a XBee module. The states reported by such a device are limited to `on` or `off`. By default, a binary sensor is considered `on` when the XBee device's digital input pin is held 'high' and considered `off` when it is held `low`. This behavior can be inverted by setting the `on_state` configuration variable to `low`.
|
||||
|
||||
### Configuration
|
||||
|
||||
@ -74,7 +74,7 @@ To enable a digital input pin as binary sensor in your installation, add the fol
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
binary_sensor:
|
||||
- platform: zigbee
|
||||
- platform: xbee
|
||||
name: Hallway PIR Sensor
|
||||
pin: 0
|
||||
```
|
||||
@ -89,7 +89,7 @@ pin:
|
||||
required: true
|
||||
type: integer
|
||||
address:
|
||||
description: The long 64-bit address of the remote Zigbee device whose digital input pin you'd like to sample. Do not include this variable if you want to sample the local Zigbee device's pins.
|
||||
description: The long 64-bit address of the remote Zigbee device whose digital input pin you'd like to sample. Do not include this variable if you want to sample the local XBee device's pins.
|
||||
required: false
|
||||
type: string
|
||||
on_state:
|
||||
@ -101,14 +101,14 @@ on_state:
|
||||
|
||||
## Light
|
||||
|
||||
A Zigbee light in this context is a light connected to one of the digital output pins on a Zigbee module. It can simply be switched on and off. By default, a light is considered `on` when the Zigbee device's digital output is held `high` and considered `off` when it is held `low`. This behavior can be inverted by setting the `on_state` configuration variable to `low`.
|
||||
A Zigbee light in this context is a light connected to one of the digital output pins on a XBee module. It can simply be switched on and off. By default, a light is considered `on` when the XBee device's digital output is held `high` and considered `off` when it is held `low`. This behavior can be inverted by setting the `on_state` configuration variable to `low`.
|
||||
|
||||
To configure a digital output pin as light, add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
light:
|
||||
- name: Desk Lamp
|
||||
platform: zigbee
|
||||
platform: xbee
|
||||
pin: 0
|
||||
```
|
||||
|
||||
@ -122,7 +122,7 @@ pin:
|
||||
required: true
|
||||
type: integer
|
||||
address:
|
||||
description: The long 64-bit address of the remote Zigbee device whose digital output pin you would like to switch. Do not include this variable if you want to switch the local Zigbee device's pins.
|
||||
description: The long 64-bit address of the remote Zigbee device whose digital output pin you would like to switch. Do not include this variable if you want to switch the local XBee device's pins.
|
||||
required: false
|
||||
type: string
|
||||
on_state:
|
||||
@ -144,7 +144,7 @@ To configure an analog input pin sensor, add the following to your `configuratio
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
- platform: zigbee
|
||||
- platform: xbee
|
||||
name: My Analog Zigbee Input
|
||||
type: analog
|
||||
pin: 0
|
||||
@ -165,7 +165,7 @@ pin:
|
||||
required: false
|
||||
type: integer
|
||||
address:
|
||||
description: The long 64-bit address of the remote Zigbee device whose pin you would like to sample. Do not include this variable if you want to sample the local Zigbee device's pins.
|
||||
description: The long 64-bit address of the remote Zigbee device whose pin you would like to sample. Do not include this variable if you want to sample the local XBee device's pins.
|
||||
required: false
|
||||
type: string
|
||||
max_volts:
|
||||
@ -186,7 +186,7 @@ To configure an analog input pin sensor, add the following to your `configuratio
|
||||
```yaml
|
||||
## Example configuration.yaml entry
|
||||
sensor:
|
||||
- platform: zigbee
|
||||
- platform: xbee
|
||||
name: My Analog Zigbee Input
|
||||
type: analog
|
||||
pin: 0
|
||||
@ -204,7 +204,7 @@ To configure a temperature sensor device, add the following to your `configurati
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
- platform: zigbee
|
||||
- platform: xbee
|
||||
name: Living Room Temperature Zigbee
|
||||
type: temperature
|
||||
address: 0013A20050E752C5
|
||||
@ -212,14 +212,14 @@ sensor:
|
||||
|
||||
## Switch
|
||||
|
||||
A Zigbee switch in this context is a device connected to one of the digital output pins on a Zigbee module. It can simply be switched on and off. By default, a switch is considered `on` when the Zigbee device's digital output is held `high` and considered `off` when it is held `low`. This behavior can be inverted by setting the `on_state` configuration variable to `low`.
|
||||
A Zigbee switch in this context is a device connected to one of the digital output pins on a XBee module. It can simply be switched on and off. By default, a switch is considered `on` when the XBee device's digital output is held `high` and considered `off` when it is held `low`. This behavior can be inverted by setting the `on_state` configuration variable to `low`.
|
||||
|
||||
To configure a digital output pin as switch, add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
switch:
|
||||
- name: Pond Fountain
|
||||
platform: zigbee
|
||||
platform: xbee
|
||||
pin: 0
|
||||
address: 0013A20040791FA2
|
||||
on_state: low
|
||||
@ -235,7 +235,7 @@ pin:
|
||||
required: true
|
||||
type: integer
|
||||
address:
|
||||
description: The long 64-bit address of the remote Zigbee device whose digital output pin you would like to switch. Do not include this variable if you want to switch the local Zigbee device's pins.
|
||||
description: The long 64-bit address of the remote Zigbee device whose digital output pin you would like to switch. Do not include this variable if you want to switch the local XBee device's pins.
|
||||
required: false
|
||||
type: string
|
||||
on_state:
|
||||
Loading…
x
Reference in New Issue
Block a user