diff --git a/source/_integrations/binary_sensor.rflink.markdown b/source/_integrations/binary_sensor.rflink.markdown index e0c6dd44b4f..a8aba0991cc 100644 --- a/source/_integrations/binary_sensor.rflink.markdown +++ b/source/_integrations/binary_sensor.rflink.markdown @@ -9,7 +9,7 @@ ha_release: 0.81 ha_domain: rflink --- -The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/en/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). +The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). First, you have to set up your [RFLink hub](/integrations/rflink/). diff --git a/source/_integrations/cover.rflink.markdown b/source/_integrations/cover.rflink.markdown index d1de0fbad3b..c4a9e3cac45 100644 --- a/source/_integrations/cover.rflink.markdown +++ b/source/_integrations/cover.rflink.markdown @@ -9,7 +9,7 @@ ha_release: 0.55 ha_domain: rflink --- -The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/en/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). +The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). First, you have to set up your [RFLink hub](/integrations/rflink/). diff --git a/source/_integrations/icloud.markdown b/source/_integrations/icloud.markdown index aa721709445..aeb9bd5b80b 100644 --- a/source/_integrations/icloud.markdown +++ b/source/_integrations/icloud.markdown @@ -24,7 +24,7 @@ There is currently support for the following platforms within Home Assistant: - [Device Tracker](#device-tracker) - [Sensor](#sensor) -It does require that your devices are registered with the [Find My](https://www.apple.com/uk/icloud/find-my/) service. +It does require that your devices are registered with the [Find My](https://www.apple.com/icloud/find-my/) service. {% include integrations/config_flow.md %} diff --git a/source/_integrations/light.rflink.markdown b/source/_integrations/light.rflink.markdown index d9b4c5d44e5..1e8b5e0e032 100644 --- a/source/_integrations/light.rflink.markdown +++ b/source/_integrations/light.rflink.markdown @@ -9,7 +9,7 @@ ha_release: 0.38 ha_domain: rflink --- -The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/en/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). +The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). First, you have to set up your [RFLink hub](/integrations/rflink/). diff --git a/source/_integrations/rflink.markdown b/source/_integrations/rflink.markdown index ebe82669094..60e1c80f055 100644 --- a/source/_integrations/rflink.markdown +++ b/source/_integrations/rflink.markdown @@ -17,7 +17,7 @@ ha_codeowners: ha_integration_type: integration --- -The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example, the [Nodo RFLink Gateway](https://www.nodo-shop.nl/en/21-rflink-). RFLink Gateway is an Arduino Mega firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). +The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example, the [Nodo RFLink Gateway](https://www.nodo-shop.nl/21-rflink-). RFLink Gateway is an Arduino Mega firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). The 433 MHz spectrum is used by many manufacturers mostly using their own protocol/standard and includes devices like: light switches, blinds, weather stations, alarms and various other sensors. @@ -101,7 +101,7 @@ Tested with Wifi serial bridge [esp-link V2.2.3](https://github.com/jeelabs/esp-
-Due to different logic levels, a voltage level shifter is required between the 3.3V NodeMCU and 5V Arduino MEGA 2560 pins. The BSS138 bidirectional logic level converter has been tested for serial pins and the [link](https://www.aliexpress.com/item/8CH-IIC-I2C-Logic-Level-Converter-Bi-Directional-Module-DC-DC-5V-to-3-3V-Setp/32238089139.html) is recommended for the CC2500 transceiver (used for IKEA Ansluta and Philips Living Colors) +Due to different logic levels, a voltage level shifter is required between the 3.3V NodeMCU and 5V Arduino MEGA 2560 pins. The BSS138 bidirectional logic level converter has been tested for serial pins and the [link](https://aliexpress.com/item/32238089139.html) is recommended for the CC2500 transceiver (used for IKEA Ansluta and Philips Living Colors)
diff --git a/source/_integrations/sensor.rflink.markdown b/source/_integrations/sensor.rflink.markdown index 453e6e1333b..fb4dbc91cfd 100644 --- a/source/_integrations/sensor.rflink.markdown +++ b/source/_integrations/sensor.rflink.markdown @@ -9,7 +9,7 @@ ha_release: 0.38 ha_domain: rflink --- -The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/en/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). +The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example the [Nodo RFLink Gateway](https://www.nodo-shop.nl/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). ## Configuration diff --git a/source/_integrations/switch.rflink.markdown b/source/_integrations/switch.rflink.markdown index 29936fc2f8d..7316083e596 100644 --- a/source/_integrations/switch.rflink.markdown +++ b/source/_integrations/switch.rflink.markdown @@ -9,7 +9,7 @@ ha_release: 0.38 ha_domain: rflink --- -The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example, the [Nodo RFLink Gateway](https://www.nodo-shop.nl/en/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). +The `rflink` integration supports devices that use [RFLink gateway firmware](https://www.rflink.nl/download.php), for example, the [Nodo RFLink Gateway](https://www.nodo-shop.nl/21-rflink-). RFLink gateway is an Arduino firmware that allows two-way communication with a multitude of RF wireless devices using cheap hardware (Arduino + transceiver). First, you have to set up your [RFLink hub](/integrations/rflink/). diff --git a/source/_integrations/xiaomi_ble.markdown b/source/_integrations/xiaomi_ble.markdown index 16c85ee618c..d3bf2c56280 100644 --- a/source/_integrations/xiaomi_ble.markdown +++ b/source/_integrations/xiaomi_ble.markdown @@ -70,7 +70,7 @@ Flower Care firmware update steps: - Install the official "Flower Care" app by HHCC: - [Google Play](https://play.google.com/store/apps/details?id=com.huahuacaocao.flowercare) (requires location and storage permission) - - [Apple App Store](https://apps.apple.com/us/app/flower-care/id1095274672) + - [Apple App Store](https://apps.apple.com/app/flower-care/id1095274672) - Place the device with the app within 10cm of the plant sensor - Press the "+" button on the top right in the devices tab of the app - Add the plant sensor to the app and select an arbitrary plant