mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-24 01:37:23 +00:00
Include new Tado authentication method
This commit is contained in:
parent
bb07619b46
commit
557810616a
@ -40,16 +40,27 @@ There is currently support for the following device types within Home Assistant:
|
||||
- Weather - for information about the current weather at the location of your Tado home.
|
||||
- Switch - for controlling child lock on supported devices
|
||||
|
||||
## Unsupported device types
|
||||
|
||||
New Tado X devices are not supported by this integration, they have to be used through the [Matter integration](/integrations/matter).
|
||||
|
||||
{% include integrations/config_flow.md %}
|
||||
|
||||
The Tado thermostats are internet connected thermostats. There exists an unofficial API at [my.tado.com](https://my.tado.com/), which is used by their website and now by this component.
|
||||
|
||||
It currently supports presenting the current temperature, the setting temperature and the current operation mode. The operation mode can be set to manual, auto and off. If no user is at home anymore, all Tado zones show the away-state (Only with Tado assist mode). Manually switching between home-mode and away-mode is also supported. Manually switching to auto-mode is only supported with Tado assist mode. Any Tado climate card can be switched between these presence modes, this changes the setting for the entire home.
|
||||
|
||||
{% include integrations/config_flow.md %}
|
||||
|
||||
## Connect with Tado
|
||||
As of the **21th of March, 2025** Tado has changed the authentication method. This means a few extra steps need to be followed in order to login:
|
||||
|
||||
1. When you set up this integration, the integration will setup a "Device Code" and provide an URL to Tado's authentication server.
|
||||
2. Follow the URL and confirm the "Device Code" (normally it should be copied automatically).
|
||||
3. Follow the steps to login and authenticate your account.
|
||||
4. Once the authentication is completed, go back to Home Assistant. Wait a few seconds for the loading screen to finish. You are now connected with Tado!
|
||||
|
||||
### Migrate to new authentication method
|
||||
By default, the integration will detect when a re-authentication is needed for the new login method. It will prompt with a re-authenticate action. These are the same steps as explained in "Connect with Tado".
|
||||
|
||||
## Unsupported device types
|
||||
|
||||
New Tado X devices are not supported by this integration, they have to be used through the [Matter integration](/integrations/matter).
|
||||
|
||||
## Presence detection
|
||||
|
||||
The Tado device tracker is using the [Tado Smart Thermostat](https://www.tado.com/) and its support for person presence detection based on smartphone location by geofencing.
|
||||
|
Loading…
x
Reference in New Issue
Block a user