diff --git a/source/_integrations/zha.markdown b/source/_integrations/zha.markdown
index d741f935de0..690a515773a 100644
--- a/source/_integrations/zha.markdown
+++ b/source/_integrations/zha.markdown
@@ -55,6 +55,7 @@ ZHA integration uses a hardware independent Zigbee stack implementation with mod
   - [RaspBee II (a.k.a. RaspBee 2) Raspberry Pi Shield from dresden elektronik](https://www.dresden-elektronik.com/product/raspbee-II.html)
   - [RaspBee Raspberry Pi Shield from dresden elektronik](https://phoscon.de/raspbee)
 - EmberZNet based radios using the EZSP protocol (via the [bellows](https://github.com/zigpy/bellows) library for zigpy)
+  - [ITEAD Sonoff ZBBridge](https://www.itead.cc/smart-home/sonoff-zbbridge.html) (Note! This first have to be flashed with [Tasmota firmware and EmberZNet 6.5.x.x](https://www.digiblur.com/2020/07/how-to-use-sonoff-zigbee-bridge-with.html))
   - [Nortek GoControl QuickStick Combo Model HUSBZB-1 (Z-Wave & Zigbee USB Adapter)](https://www.nortekcontrol.com/products/2gig/husbzb-1-gocontrol-quickstick-combo/)
   - [Elelabs Zigbee USB Adapter](https://elelabs.com/products/elelabs_usb_adapter.html)
   - [Elelabs Zigbee Raspberry Pi Shield](https://elelabs.com/products/elelabs_zigbee_shield.html)
@@ -120,11 +121,12 @@ eg `/dev/serial/by-id/usb-Silicon_Labs_HubZ_Smart_Home_Controller_C0F003D3-if01-
 
 Press `Submit` The success dialog will appear or an error will be displayed in the popup. An error is likely if Home Assistant can't access the USB device or your device is not up to date. Refer to [Troubleshooting](#troubleshooting) below for more information.
 
-If you are use ZiGate, you have to use some special usb_path configuration:
+If you are use ZiGate or Sonoff ZBBridge you have to use some special usb_path configuration:
 
 - ZiGate USB TTL or DIN: `/dev/ttyUSB0` or `auto` to auto discover the zigate
 - PiZigate : `pizigate:/dev/serial0`
 - Wifi Zigate : `socket://[IP]:[PORT]` for example `socket://192.168.1.10:9999`
+- Sonoff ZBBridge : `socket://[IP]:[PORT]` for example `socket://192.168.1.11:8888`
 
 {% configuration %}
 database_path: