mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-23 09:17:06 +00:00
Update format and wording
This commit is contained in:
parent
897f003ab9
commit
5d84b6ca87
@ -9,16 +9,22 @@ sharing: true
|
||||
footer: true
|
||||
---
|
||||
|
||||
You may wish to modify the zwave settings ozw*.xml file in your .homeassistant root folder, or certain situations/devices may require it (i.e. Aeon Multisensor 6). To do this, utilize [Open-Zwave Control Panel](https://github.com/OpenZWave/open-zwave-control-panel). Alternatively, use [Domoticz](https://www.domoticz.com/), which incorporates the Open-Zwave Control Panel project into an easy to use Raspberry Pi image.
|
||||
You may wish to modify the Z-Wave settings in your `ozw*.xml` file stored in the `.homeassistant` directory, or certain situations/devices may require it (i.e. Aeon Multisensor 6). To do this, utilize [Open-Zwave Control Panel](https://github.com/OpenZWave/open-zwave-control-panel). Alternatively, use [Domoticz](https://www.domoticz.com/), which incorporates the Open-Zwave Control Panel project into an easy to use Raspberry Pi image.
|
||||
|
||||
The reasoning for using these tools is that your Zwave controller stores the values and data that are used to control the network. The XML file in the .homeassistant folder acts as a settings/values cache for the zwave network, so modifying it directly won't change the network values. The Open-Zwave Control Panel writes values directly to the network, and will provide you with an updated .xml file to overwrite in your .homeassistant folder. This is the most foolproof way to make modifications to your zwave devices.
|
||||
The reasoning for using these tools is that your Z-Wave controller stores the values and data that are used to control the network. The XML file in the `.homeassistant` folder acts as a settings/values cache for the Z-Wave network, so modifying it directly won't change the network values. The Open-Zwave Control Panel writes values directly to the network and will provide you with an updated `.xml` file to overwrite in your `.homeassistant` folder. This is the most foolproof way to make modifications to your Z-Wave devices.
|
||||
|
||||
Although totally normal for your ZWave stick (Aeon Aeotec Z-Stick Gen5 for example) to cycle through LEDs (Yellow, Blue and Red) while plugged into your Pi, it's also super annoying. If you want to turn off the cycling color, you can use the following commands from a terminal session to your Pi.
|
||||
Although totally normal for your Z-Wave stick (Aeon Aeotec Z-Stick Gen5 for example) to cycle through its LEDs (Yellow, Blue and Red) while plugged into your system. If you don like this behaviour then you could turn it off.
|
||||
|
||||
Turn off Disco lights
|
||||
Use the following commands from a terminal session to your Pi where your Z-Wave stick is connected as an example.
|
||||
|
||||
```echo -e -n "\x01\x08\x00\xF2\x51\x01\x00\x05\x01\x51" > /dev/serial/by-id/usb-0658_0200-if00```
|
||||
Turn off "Disco lights":
|
||||
|
||||
Turn on Disco lights
|
||||
```bash
|
||||
$ echo -e -n "\x01\x08\x00\xF2\x51\x01\x00\x05\x01\x51" > /dev/serial/by-id/usb-0658_0200-if00
|
||||
```
|
||||
|
||||
```echo -e -n "\x01\x08\x00\xF2\x51\x01\x01\x05\x01\x50" > /dev/serial/by-id/usb-0658_0200-if00```
|
||||
Turn on "Disco lights":
|
||||
|
||||
```bash
|
||||
$ echo -e -n "\x01\x08\x00\xF2\x51\x01\x01\x05\x01\x50" > /dev/serial/by-id/usb-0658_0200-if00
|
||||
```
|
||||
|
Loading…
x
Reference in New Issue
Block a user