diff --git a/source/_components/binary_sensor.bbb_gpio.markdown b/source/_components/binary_sensor.bbb_gpio.markdown
new file mode 100644
index 00000000000..ddb36695928
--- /dev/null
+++ b/source/_components/binary_sensor.bbb_gpio.markdown
@@ -0,0 +1,43 @@
+---
+layout: page
+title: "BeagleBone Black GPIO Binary Sensor"
+description: "Instructions how to integrate the GPIO sensor capability of a BeagleBone Black into Home Assistant."
+date: 2017-01-14 10:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: beaglebone-black.png
+ha_category: Binary Sensor
+ha_release: 0.37
+---
+
+The `bbb_gpio` binary sensor platform allows you to read sensor values of the GPIOs of your [BeagleBone Black](https://beagleboard.org/black).
+
+To use your BeagleBone Black's GPIO in your installation, add the following to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+binary_sensor:
+ - platform: bbb_gpio
+   pins:
+     P8_12:
+       name: Door
+     GPIO0_26:
+       name: Window
+       bouncetime: 100
+       invert_logic: true
+       pull_mode: UP
+```
+
+Configuration variables:
+
+- **pins** array (*Required*): Array of used pins.
+  - **pin_name** (*Required*): Pin numbers and corresponding names.
+    - **name** (*Required*): Friendly name to use for the frontend.
+    - **bouncetime** (*Optional*): Debounce time for reading input pin defined in miliseconds [ms]. Defaults to `50 ms`.
+    - **invert_logic** (*Optional*): If true, inverts the input logic to ACTIVE LOW. Default is `false` (ACTIVE HIGH).
+    - **pull_mode** (*Optional*): Type of internal pull resistor connected to input. Options are 'UP' - pull-up resistor and 'DOWN' - pull-down resistor. Defaults to `UP`.
+
+For more details about the GPIO layout, visit the [article](http://elinux.org/Beagleboard:BeagleBoneBlack) about the BeagleBone Black.
+