diff --git a/source/_integrations/light.template.markdown b/source/_integrations/light.template.markdown index 2d7e2482499..64bb2d0bc66 100644 --- a/source/_integrations/light.template.markdown +++ b/source/_integrations/light.template.markdown @@ -205,9 +205,9 @@ In this section you will find some real-life examples of how to use this light. ### Theater Volume Control This example shows a light that is actually a home theater's volume. This -component gives you the flexibility to provide whatever you'd like to send as +integration gives you the flexibility to provide whatever you'd like to send as the payload to the consumer including any scale conversions you may need to -make; the [Media Player component](/integrations/media_player/) needs a floating +make; the [Media Player integration](/integrations/media_player/) needs a floating point percentage value from `0.0` to `1.0`. {% raw %} diff --git a/source/_integrations/logbook.markdown b/source/_integrations/logbook.markdown index 3d0d711e922..d1b54d2c2d6 100644 --- a/source/_integrations/logbook.markdown +++ b/source/_integrations/logbook.markdown @@ -154,7 +154,7 @@ exclude them in `recorder` instead. ### Custom Entries It is possible to add custom entries to the logbook by using the script -component to fire an event. +integration to fire an event. ```yaml # Example configuration.yaml entry diff --git a/source/_integrations/logi_circle.markdown b/source/_integrations/logi_circle.markdown index 340b7766810..fadce1c5bd0 100644 --- a/source/_integrations/logi_circle.markdown +++ b/source/_integrations/logi_circle.markdown @@ -98,7 +98,7 @@ logi_circle: - streaming ``` -By default, all sensors available from your Logi Circle devices will be monitored. Leave `monitored_conditions` blank to disable all sensors for the Logi Circle component. Devices without an internal battery will not expose a `battery_level` sensor. +By default, all sensors available from your Logi Circle devices will be monitored. Leave `monitored_conditions` blank to disable all sensors for the Logi Circle integration. Devices without an internal battery will not expose a `battery_level` sensor. {% configuration %} sensor: diff --git a/source/_integrations/lutron_caseta.markdown b/source/_integrations/lutron_caseta.markdown index ab278dd3fba..5e23df3a031 100644 --- a/source/_integrations/lutron_caseta.markdown +++ b/source/_integrations/lutron_caseta.markdown @@ -45,7 +45,7 @@ Supports Bridges: - QSX Processor (HQP7) - RadioRA 3 All-in-One Processor (RR-PROC3) -For the RadioRA 2 and HomeWorks QS product lines, see the [Lutron component](/integrations/lutron/). +For the RadioRA 2 and HomeWorks QS product lines, see the [Lutron integration](/integrations/lutron/). The currently supported devices are: @@ -118,7 +118,7 @@ To get Lutron Caseta roller, honeycomb shades, lights, scene and switch working After setup, shades will appear in Home Assistant using an `entity_id` based on the name used in the Lutron mobile app. For example, a shade called 'Living Room Window' will appear in Home Assistant as `cover.living_room_window`. -For more information on working with shades in Home Assistant, see the [Covers component](/integrations/cover/). +For more information on working with shades in Home Assistant, see the [Covers integration](/integrations/cover/). Available services: `cover.open_cover`, `cover.close_cover`, `cover.stop_cover` and `cover.set_cover_position`. Cover `position` ranges from `0` for fully closed to `100` for fully open. @@ -128,7 +128,7 @@ After setup, dimmable lights including wall and plug-in dimmers will appear in H For non-dimmable lights or switched loads, see the switch section on this page. -For more information on working with lights in Home Assistant, see the [Lights component](/integrations/light/). +For more information on working with lights in Home Assistant, see the [Lights integration](/integrations/light/). ## Scene @@ -136,7 +136,7 @@ The Lutron Caseta scene platform allows you to control your Smart Bridge Scenes After setup, scenes will appear in Home Assistant using an `entity_id` based on the name used in the Lutron mobile app. For example, a scene called 'Entertain' will appear in Home Assistant as `scene.entertain`. -For more information on working with scenes in Home Assistant, see the [Scenes component](/integrations/scene/). +For more information on working with scenes in Home Assistant, see the [Scenes integration](/integrations/scene/). Scenes are not directly supported on RA3 and QSX models, however the button platform (see below) can be used to activate scenes for these systems. @@ -146,13 +146,13 @@ After setup, switches will appear in Home Assistant using an `entity_id` based o For dimmable lights including wall and plug-in dimmers, see the light section on this page. -For more information on working with switches in Home Assistant, see the [Switches component](/integrations/switch/). +For more information on working with switches in Home Assistant, see the [Switches integration](/integrations/switch/). ## Fan After setup, fans will appear in Home Assistant using an `entity_id` based on the name used in the Lutron mobile app. For example, a light switch called 'Master Bedroom Ceiling Fan' will appear in Home Assistant as `fan.master_bedroom_ceiling_fan`. -For more information on working with fans in Home Assistant, see the [Fans component](/components/fan/). +For more information on working with fans in Home Assistant, see the [Fans integration](/integrations/fan/). ## Sensor @@ -166,7 +166,7 @@ Lutron Caseta occupancy sensors support 4 different timeouts and 3 different sen Because Lutron Caseta devices automatically report state to Home Assistant (rather than relying on polling), occupancy status updates occur almost instantaneously. -For more information on working with binary sensors in Home Assistant, see the [Binary Sensors Component](/components/binary_sensor/) +For more information on working with binary sensors in Home Assistant, see the [Binary Sensors integration](/integrations/binary_sensor/) ## Button diff --git a/source/_integrations/lyric.markdown b/source/_integrations/lyric.markdown index 390bb30e636..52069813ff8 100644 --- a/source/_integrations/lyric.markdown +++ b/source/_integrations/lyric.markdown @@ -22,7 +22,7 @@ The Honeywell Lyric integration integrates the Lyric thermostat platform into Ho ## Setup -To set up this component, you first **must** set up a developer account with Honeywell: +To set up this integration, you first **must** set up a developer account with Honeywell: 1. Go to the [developer site](https://developer.honeywellhome.com) and register with an account. 1. Next, create a [new app](https://developer.honeywellhome.com/user/me/apps/add) via the `My Apps` section.