Add HA release

source/_components/alarm_control_panel.verisure.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: verisure.png
 ha_category: Alarm
+ha_release: 0.7.3
 ---
 
 

source/_components/arduino.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: arduino.png
 ha_category: DIY
 featured: true
+ha_release: pre 0.7
 ---
 
 The [Arduino](https://www.arduino.cc/) device family are microcontroller boards that are often based on the ATmega328 chip. They come with digital input/output pins (some can be used as PWM outputs), analog inputs, and a USB connection. The equipment depends on the [type](https://www.arduino.cc/en/Main/Products) of board. The most common ones are the Arduino Uno and the Arduino Leonardo with 14 digital input/output pins and 6 analog input pins.

source/_components/binary_sensor.http.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: http.png
 ha_category: Binary Sensor
+ha_release: pre 0.7
 ---
 
 The URL for a binary sensor looks like the example below:

source/_components/binary_sensor.rpi_gpio.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: raspberry-pi.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 

source/_components/camera.generic.markdown

@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Camera
+ha_release: pre 0.7
 ---
 
 

source/_components/device_tracker.asuswrt.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: asus.png
 ha_category: Presence Detection
+ha_release: pre 0.7
 ---
 
 

source/_components/device_tracker.owntracks.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: owntracks.png
 ha_category: Presence Detection
 featured: true
+ha_release: 0.7.4
 ---
 
 

source/_components/device_tracker.tplink.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: tp-link.png
 ha_category: Presence Detection
+ha_release: pre 0.7
 ---
 
 

source/_components/downloader.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: home-assistant.png
 ha_category: Other
+ha_release: pre 0.7
 ---
 
 The `downloader` component provides a service to download files. It will raise an error and not continue to set itself up when the download directory does not exist.

source/_components/isy994.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: universal_devices.png
 ha_category: Hub
+ha_release: pre 0.7
 ---
 
 The ISY994 is a home automation controller that is capable of controlling Insteon and X10 devices. The controller is also capable of controlling Z-Wave devices but that functionality has not yet been confirmed with Home Assistant.

source/_components/light.limitlessled.markdown

@@ -10,6 +10,7 @@ sharing: true
 footer: true
 ha_category: Light
 ha_iot_class: "Assumed State"
+ha_release: pre 0.7
 ---
 
 `limitlessled` can control your [LimitlessLED](http://www.limitlessled.com/) lights from within Home Assistant. The lights are also known as EasyBulb, AppLight, AppLamp, MiLight, LEDme, dekolight or iLight.

source/_components/media_player.itunes.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: itunes.png
 ha_category: Media Player
+ha_release: 0.7.3
 ---
 
 

source/_components/media_player.kodi.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: kodi.png
 ha_category: Media Player
 featured: true
+ha_release: pre 0.7
 ---
 
 

source/_components/media_player.mpd.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: mpd.png
 ha_category: Media Player
+ha_release: pre 0.7
 ---
 
 

source/_components/media_player.plex.markdown

@@ -10,10 +10,11 @@ footer: true
 logo: plex.png
 ha_category: Media Player
 featured: true
+ha_release: 0.7.4
 ---
 
 
-The Plex platform allows you to connect a [Plex Media Server](https://plex.tv) to Home Assistant. It will allow you to control media playback and see the current playing item. The preferred way to setup the Plex platform is by enabling the the [the discovery component](/components/discovery/) and requires GDM to be enabled.
+The `plex` platform allows you to connect a [Plex Media Server](https://plex.tv) to Home Assistant. It will allow you to control media playback and see the current playing item. The preferred way to setup the Plex platform is by enabling the the [the discovery component](/components/discovery/) and requires GDM to be enabled.
 
 If local authentication is enabled or multiple users are defined, HASS requires an authentication token to be entered in the webinterface. See [Finding your account token / X-Plex-Token](https://support.plex.tv/hc/en-us/articles/204059436).
 

source/_components/media_player.sonos.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: sonos.png
 ha_category: Media Player
 featured: true
+ha_release: 0.7.3
 ---
 
 

source/_components/media_player.squeezebox.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: logitech.png
 ha_category: Media Player
+ha_release: pre 0.7
 ---
 
 

source/_components/modbus.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Hub
+ha_release: pre 0.7
 ---
 
 

source/_components/mqtt.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: mqtt.png
 ha_category: Hub
 featured: true
+ha_release: pre 0.7
 ---
 
 MQTT (aka MQ Telemetry Transport) is a machine-to-machine or "Internet of Things" connectivity protocol on top of TCP/IP. It allows extremely lightweight publish/subscribe messaging transport.

source/_components/notify.instapush.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: instapush.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/notify.nma.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: nma.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/notify.pushover.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: pushover.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/notify.slack.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: slack.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/notify.smtp.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: smtp.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/notify.syslog.markdown

@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/notify.xmpp.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: xmpp.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---
 
 

source/_components/rfxtrx.markdown

@@ -8,8 +8,10 @@ comments: false
 sharing: true
 footer: true
 ha_category: Hub
+ha_release: pre 0.7
 ---
-The rfxtrx component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.
+
+The `rfxtrx` component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.
 
 To enable RFXtrx in your installation, add the following to your `configuration.yaml` file:
 

source/_components/sensor.arduino.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: arduino.png
 ha_category: DIY
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.bitcoin.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: bitcoin.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.efergy.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: efergy.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.forecast.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: forecast.png
 ha_category: Weather
 featured: true
+ha_release: pre 0.7
 ---
 
 The `forecast` platform uses the [Forecast.io](https://forecast.io/) web service as a source of meteorological data for your location. The location is based on the `longitude` and `latitude` coordinates configured in `configuration.yaml`.  The coordinates are auto-detected but to take advantage of the hyper-local weather reported by forecast.io, you can refine them down to your exact home address. GPS coordinates can be found by using Google Maps and clicking on your home.

source/_components/sensor.http.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: http.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 The URL for a sensor looks like the example below:

source/_components/sensor.modbus.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.openweathermap.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: openweathermap.png
 ha_category: Weather
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.rest.markdown

@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Sensor
+ha_release: 0.7.4
 ---
 
 

source/_components/sensor.sabnzbd.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: sabnzbd.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.swiss_public_transport.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 ha_category: Sensor
 ha_iot_class: "Local Polling"
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.systemmonitor.markdown

@@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 The `systemmonitor` sensor platform to allow you to monitor disk usage, memory usage, CPU usage, and running processes. This platform has superseded the process component which is now considered deprecated.

source/_components/sensor.time_date.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: home-assistant.png
 ha_category: Sensor
 ha_iot_class: "Local Push"
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.transmission.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: transmission.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---
 
 

source/_components/sensor.worldclock.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: home-assistant.png
 ha_category: Sensor
 ha_iot_class: "Local Push"
+ha_release: pre 0.7
 ---
 
 

source/_components/switch.arduino.markdown

@@ -9,10 +9,11 @@ sharing: true
 footer: true
 logo: arduino.png
 ha_category: DIY
+ha_release: pre 0.7
 ---
 
 
-The `arduino` switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3,5,6,9,10, and 11 on an Arduino Uno) is not supported yet.
+The `arduino` switch platform allows you to control the digital pins of your [Arduino](https://www.arduino.cc/) board. Support for switching pins is limited to high/on and low/off of the digital pins. PWM (pin 3, 5, 6, 9, 10, and 11 on an Arduino Uno) is not supported yet.
 
 To enable the Arduino pins with Home Assistant, add the following section to your `configuration.yaml` file:
 

source/_components/switch.command_line.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: command_line.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 

source/_components/switch.edimax.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: edimax.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 

source/_components/switch.hikvision.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: hikvision.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 

source/_components/switch.modbus.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 

source/_components/switch.rpi_gpio.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: raspberry-pi.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 

source/_components/switch.transmission.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: transmission.png
 ha_category: Switch
+ha_release: pre 0.7
 ---
 
 

source/_components/verisure.markdown

@@ -9,19 +9,18 @@ sharing: true
 footer: true
 logo: verisure.png
 ha_category: Hub
+ha_release: pre 0.7
 ---
 
-
-
 Home Assistant has support to integrate your [Verisure](https://www.verisure.com/) devices.
 
 We support:
 
- * Alarm
+ * [Alarm](/components/alarm_control_panel.verisure/)
- * Smartplugs
+ * [Smartplugs](/components/switch.verisure/)
- * Reading from thermometers and hygrometers integrated in various devices
+ * Reading from thermometers and hygrometers integrated in various [devices](/components/sensor.verisure/)
  * Mouse Detector
- * Locks 
+ * [Locks](/components/lock.verisure/)
 
 To integrate Verisure with Home Assistant, add the following section to your `configuration.yaml` file: