Add HA release

2025-07-21 16:27:19 +00:00 · 2016-05-07 13:58:27 +02:00 · 2016-05-07 13:58:27 +02:00 · 5f1cc30066
commit 5f1cc30066
parent 812cdc0973
49 changed files with 57 additions and 9 deletions
--- a/source/_components/alarm_control_panel.verisure.markdown
+++ b/source/_components/alarm_control_panel.verisure.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: verisure.png
 ha_category: Alarm
+ha_release: 0.7.3
 ---


--- a/source/_components/arduino.markdown
+++ b/source/_components/arduino.markdown
@ -10,6 +10,7 @@ footer: true
 logo: arduino.png
 ha_category: DIY
 featured: true
+ha_release: pre 0.7
 ---

 The [Arduino](https://www.arduino.cc/) device family are microcontroller boards that are often based on the ATmega328 chip. They come with digital input/output pins (some can be used as PWM outputs), analog inputs, and a USB connection. The equipment depends on the [type](https://www.arduino.cc/en/Main/Products) of board. The most common ones are the Arduino Uno and the Arduino Leonardo with 14 digital input/output pins and 6 analog input pins.
--- a/source/_components/binary_sensor.http.markdown
+++ b/source/_components/binary_sensor.http.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: http.png
 ha_category: Binary Sensor
+ha_release: pre 0.7
 ---

 The URL for a binary sensor looks like the example below:
--- a/source/_components/binary_sensor.rpi_gpio.markdown
+++ b/source/_components/binary_sensor.rpi_gpio.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: raspberry-pi.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---


--- a/source/_components/camera.generic.markdown
+++ b/source/_components/camera.generic.markdown
@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Camera
+ha_release: pre 0.7
 ---


--- a/source/_components/device_tracker.asuswrt.markdown
+++ b/source/_components/device_tracker.asuswrt.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: asus.png
 ha_category: Presence Detection
+ha_release: pre 0.7
 ---


--- a/source/_components/device_tracker.owntracks.markdown
+++ b/source/_components/device_tracker.owntracks.markdown
@ -10,6 +10,7 @@ footer: true
 logo: owntracks.png
 ha_category: Presence Detection
 featured: true
+ha_release: 0.7.4
 ---


--- a/source/_components/device_tracker.tplink.markdown
+++ b/source/_components/device_tracker.tplink.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: tp-link.png
 ha_category: Presence Detection
+ha_release: pre 0.7
 ---


--- a/source/_components/downloader.markdown
+++ b/source/_components/downloader.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: home-assistant.png
 ha_category: Other
+ha_release: pre 0.7
 ---

 The `downloader` component provides a service to download files. It will raise an error and not continue to set itself up when the download directory does not exist.
--- a/source/_components/isy994.markdown
+++ b/source/_components/isy994.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: universal_devices.png
 ha_category: Hub
+ha_release: pre 0.7
 ---

 The ISY994 is a home automation controller that is capable of controlling Insteon and X10 devices. The controller is also capable of controlling Z-Wave devices but that functionality has not yet been confirmed with Home Assistant.
--- a/source/_components/light.limitlessled.markdown
+++ b/source/_components/light.limitlessled.markdown
@ -10,6 +10,7 @@ sharing: true
 footer: true
 ha_category: Light
 ha_iot_class: "Assumed State"
+ha_release: pre 0.7
 ---

 `limitlessled` can control your [LimitlessLED](http://www.limitlessled.com/) lights from within Home Assistant. The lights are also known as EasyBulb, AppLight, AppLamp, MiLight, LEDme, dekolight or iLight.
--- a/source/_components/media_player.itunes.markdown
+++ b/source/_components/media_player.itunes.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: itunes.png
 ha_category: Media Player
+ha_release: 0.7.3
 ---


--- a/source/_components/media_player.kodi.markdown
+++ b/source/_components/media_player.kodi.markdown
@ -10,6 +10,7 @@ footer: true
 logo: kodi.png
 ha_category: Media Player
 featured: true
+ha_release: pre 0.7
 ---


--- a/source/_components/media_player.mpd.markdown
+++ b/source/_components/media_player.mpd.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: mpd.png
 ha_category: Media Player
+ha_release: pre 0.7
 ---


--- a/source/_components/media_player.plex.markdown
+++ b/source/_components/media_player.plex.markdown
@ -10,10 +10,11 @@ footer: true
 logo: plex.png
 ha_category: Media Player
 featured: true
+ha_release: 0.7.4
 ---


-The Plex platform allows you to connect a [Plex Media Server](https://plex.tv) to Home Assistant. It will allow you to control media playback and see the current playing item. The preferred way to setup the Plex platform is by enabling the the [the discovery component](/components/discovery/) and requires GDM to be enabled.
+The `plex` platform allows you to connect a [Plex Media Server](https://plex.tv) to Home Assistant. It will allow you to control media playback and see the current playing item. The preferred way to setup the Plex platform is by enabling the the [the discovery component](/components/discovery/) and requires GDM to be enabled.

 If local authentication is enabled or multiple users are defined, HASS requires an authentication token to be entered in the webinterface. See [Finding your account token / X-Plex-Token](https://support.plex.tv/hc/en-us/articles/204059436).

--- a/source/_components/media_player.sonos.markdown
+++ b/source/_components/media_player.sonos.markdown
@ -10,6 +10,7 @@ footer: true
 logo: sonos.png
 ha_category: Media Player
 featured: true
+ha_release: 0.7.3
 ---


--- a/source/_components/media_player.squeezebox.markdown
+++ b/source/_components/media_player.squeezebox.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: logitech.png
 ha_category: Media Player
+ha_release: pre 0.7
 ---


--- a/source/_components/modbus.markdown
+++ b/source/_components/modbus.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Hub
+ha_release: pre 0.7
 ---


--- a/source/_components/mqtt.markdown
+++ b/source/_components/mqtt.markdown
@ -10,6 +10,7 @@ footer: true
 logo: mqtt.png
 ha_category: Hub
 featured: true
+ha_release: pre 0.7
 ---

 MQTT (aka MQ Telemetry Transport) is a machine-to-machine or "Internet of Things" connectivity protocol on top of TCP/IP. It allows extremely lightweight publish/subscribe messaging transport.
--- a/source/_components/notify.instapush.markdown
+++ b/source/_components/notify.instapush.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: instapush.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/notify.nma.markdown
+++ b/source/_components/notify.nma.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: nma.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/notify.pushover.markdown
+++ b/source/_components/notify.pushover.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: pushover.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/notify.slack.markdown
+++ b/source/_components/notify.slack.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: slack.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/notify.smtp.markdown
+++ b/source/_components/notify.smtp.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: smtp.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/notify.syslog.markdown
+++ b/source/_components/notify.syslog.markdown
@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/notify.xmpp.markdown
+++ b/source/_components/notify.xmpp.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: xmpp.png
 ha_category: Notifications
+ha_release: pre 0.7
 ---


--- a/source/_components/rfxtrx.markdown
+++ b/source/_components/rfxtrx.markdown
@ -8,8 +8,10 @@ comments: false
 sharing: true
 footer: true
 ha_category: Hub
+ha_release: pre 0.7
 ---
-The rfxtrx component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.
+
+The `rfxtrx` component supports RFXtrx devices by [RFXCOM](http://www.rfxcom.com) which communicate in the frequency range of 433.92 MHz.

 To enable RFXtrx in your installation, add the following to your `configuration.yaml` file:

--- a/source/_components/sensor.arduino.markdown
+++ b/source/_components/sensor.arduino.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: arduino.png
 ha_category: DIY
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.bitcoin.markdown
+++ b/source/_components/sensor.bitcoin.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: bitcoin.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.efergy.markdown
+++ b/source/_components/sensor.efergy.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: efergy.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.forecast.markdown
+++ b/source/_components/sensor.forecast.markdown
@ -10,6 +10,7 @@ footer: true
 logo: forecast.png
 ha_category: Weather
 featured: true
+ha_release: pre 0.7
 ---

 The `forecast` platform uses the [Forecast.io](https://forecast.io/) web service as a source of meteorological data for your location. The location is based on the `longitude` and `latitude` coordinates configured in `configuration.yaml`.  The coordinates are auto-detected but to take advantage of the hyper-local weather reported by forecast.io, you can refine them down to your exact home address. GPS coordinates can be found by using Google Maps and clicking on your home.
--- a/source/_components/sensor.http.markdown
+++ b/source/_components/sensor.http.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: http.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---

 The URL for a sensor looks like the example below:
--- a/source/_components/sensor.modbus.markdown
+++ b/source/_components/sensor.modbus.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.openweathermap.markdown
+++ b/source/_components/sensor.openweathermap.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: openweathermap.png
 ha_category: Weather
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.rest.markdown
+++ b/source/_components/sensor.rest.markdown
@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Sensor
+ha_release: 0.7.4
 ---


--- a/source/_components/sensor.sabnzbd.markdown
+++ b/source/_components/sensor.sabnzbd.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: sabnzbd.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.swiss_public_transport.markdown
+++ b/source/_components/sensor.swiss_public_transport.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 ha_category: Sensor
 ha_iot_class: "Local Polling"
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.systemmonitor.markdown
+++ b/source/_components/sensor.systemmonitor.markdown
@ -8,6 +8,7 @@ comments: false
 sharing: true
 footer: true
 ha_category: Sensor
+ha_release: pre 0.7
 ---

 The `systemmonitor` sensor platform to allow you to monitor disk usage, memory usage, CPU usage, and running processes. This platform has superseded the process component which is now considered deprecated.
--- a/source/_components/sensor.time_date.markdown
+++ b/source/_components/sensor.time_date.markdown
@ -10,6 +10,7 @@ footer: true
 logo: home-assistant.png
 ha_category: Sensor
 ha_iot_class: "Local Push"
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.transmission.markdown
+++ b/source/_components/sensor.transmission.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: transmission.png
 ha_category: Sensor
+ha_release: pre 0.7
 ---


--- a/source/_components/sensor.worldclock.markdown
+++ b/source/_components/sensor.worldclock.markdown
@ -10,6 +10,7 @@ footer: true
 logo: home-assistant.png
 ha_category: Sensor
 ha_iot_class: "Local Push"
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.arduino.markdown
+++ b/source/_components/switch.arduino.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: arduino.png
 ha_category: DIY
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.command_line.markdown
+++ b/source/_components/switch.command_line.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: command_line.png
 ha_category: Switch
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.edimax.markdown
+++ b/source/_components/switch.edimax.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: edimax.png
 ha_category: Switch
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.hikvision.markdown
+++ b/source/_components/switch.hikvision.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: hikvision.png
 ha_category: Switch
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.modbus.markdown
+++ b/source/_components/switch.modbus.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: modbus.png
 ha_category: Switch
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.rpi_gpio.markdown
+++ b/source/_components/switch.rpi_gpio.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: raspberry-pi.png
 ha_category: Switch
+ha_release: pre 0.7
 ---


--- a/source/_components/switch.transmission.markdown
+++ b/source/_components/switch.transmission.markdown
@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: transmission.png
 ha_category: Switch
+ha_release: pre 0.7
 ---


--- a/source/_components/verisure.markdown
+++ b/source/_components/verisure.markdown
@ -9,19 +9,18 @@ sharing: true
 footer: true
 logo: verisure.png
 ha_category: Hub
+ha_release: pre 0.7
 ---

-
-
 Home Assistant has support to integrate your [Verisure](https://www.verisure.com/) devices.

 We support:

- * Alarm
- * Smartplugs
- * Reading from thermometers and hygrometers integrated in various devices
+ * [Alarm](/components/alarm_control_panel.verisure/)
+ * [Smartplugs](/components/switch.verisure/)
+ * Reading from thermometers and hygrometers integrated in various [devices](/components/sensor.verisure/)
 * Mouse Detector
- * Locks 
+ * [Locks](/components/lock.verisure/)

 To integrate Verisure with Home Assistant, add the following section to your `configuration.yaml` file: