diff --git a/source/_components/cover.knx.markdown b/source/_components/cover.knx.markdown index 7fac76a499c..5b0ef3369a7 100644 --- a/source/_components/cover.knx.markdown +++ b/source/_components/cover.knx.markdown @@ -8,7 +8,7 @@ comments: false sharing: true footer: true logo: knx.png -ha_category: DIY +ha_category: Cover ha_release: 0.48 ha_iot_class: "Local Polling" --- @@ -26,9 +26,12 @@ cover: stop_address: 9/0/1 ``` +- **name** (*Optional*): A name for this devices used within Home Assistant. - **updown_address** (*Required*): The KNX group address that is used to move the cover up and down. - **stop_address** (*Required*): The group address that is used to stop the cover. - **setposition_address** (*Optional*): The group address that is used to set the position. - **getposition_address** (*Optional*): The group address that is used to read the position. -- **name** (*Optional*): A name for this devices used within Home Assistant. - +- **setangle_address** (*Optional*): The group address that is used to set the tilt angle. +- **getangle_address** (*Optional*): The group address that is used to read the tilt angle. +- **invert_position** (*Optional*): Set this to true if your actuator report fully closed as 100% +- **invert_angle** (*Optional*): Set this to true if your actuator reports tilt fully closed as 100%