mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-24 09:46:59 +00:00
🚜 Merges/Redirect EnOcean component pages (#8319)
This commit is contained in:
Klaas Schoute
Fabian Affolter
parent
e79db724de
commit
6381470071
@ -1,76 +0,0 @@
|
||||
---
|
||||
layout: page
|
||||
title: "EnOcean Binary Sensor"
|
||||
description: "Instructions on how to set up EnOcean binary sensors within Home Assistant."
|
||||
date: 2016-05-25 23:49
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: enocean.png
|
||||
ha_category: Binary Sensor
|
||||
ha_release: 0.21
|
||||
ha_iot_class: "Local Push"
|
||||
---
|
||||
|
||||
This can typically be one of those batteryless wall switches.
|
||||
Tested with:
|
||||
|
||||
- Eltako FT55 which uses the EnOcean PTM 215 module
|
||||
- [TRIO2SYS Wall switches](http://www.trio2sys.fr/index.php/fr/produits-enocean-sans-fil-sans-pile-interoperable/emetteur-sans-fils-sans-pile-interoperable-enocean) which uses the EnOcean PTM210 DB module
|
||||
|
||||
All switches using theses modules are expected to work. Other devices will most likely not work without changing the Home Assistant code.
|
||||
|
||||
## {% linkable_title Configuration %}
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](/components/enocean/) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
binary_sensor:
|
||||
- platform: enocean
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is the 4 bytes long number written on the dimmer.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the switch in the frontend.
|
||||
required: false
|
||||
type: string
|
||||
default: EnOcean binary sensor
|
||||
device_class:
|
||||
description: The [type/class](/components/binary_sensor/) of the sensor to set the icon in the frontend.
|
||||
required: false
|
||||
type: device_class
|
||||
{% endconfiguration %}
|
||||
|
||||
EnOcean binary sensors only generate 'button_pressed' events. The event data has following four fields:
|
||||
|
||||
- **id**: The ID of the device (see configuration).
|
||||
- **pushed**: `1` for a button press, `0` for a button release.
|
||||
- **which**: Always `0` when using the single rocket. `0` or `1` when using the dual rocket switch.
|
||||
- **onoff**: `0` or `1` for either side of the rocket.
|
||||
|
||||
## {% linkable_title Automation example %}
|
||||
|
||||
Sample automation to switch lights on and off:
|
||||
|
||||
```yaml
|
||||
# Example automation to turn lights on/off on button release
|
||||
automation:
|
||||
- alias: hall light switches
|
||||
trigger:
|
||||
platform: event
|
||||
event_type: button_pressed
|
||||
event_data:
|
||||
id: [0xYY, 0xYY, 0xYY, 0xYY]
|
||||
pushed: 0
|
||||
action:
|
||||
service_template: "{% raw %}{% if trigger.event.data.onoff %} light.turn_on {% else %} light.turn_off {%endif %}{% endraw %}"
|
||||
data_template:
|
||||
entity_id: "{% raw %}{% if trigger.event.data.which == 1 %} light.hall_left {% else %} light.hall_right {%endif %}{% endraw %}"
|
||||
```
|
||||
@ -8,9 +8,19 @@ comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: enocean.png
|
||||
ha_category: Hub
|
||||
ha_category:
|
||||
- Hub
|
||||
- Binary Sensor
|
||||
- Sensor
|
||||
- Light
|
||||
- Switch
|
||||
ha_release: 0.21
|
||||
ha_iot_class: "Local Push"
|
||||
redirect_from:
|
||||
- /components/binary_sensor.enocean/
|
||||
- /components/sensor.enocean/
|
||||
- /components/light.enocean/
|
||||
- /components/switch.enocean/
|
||||
---
|
||||
|
||||
The [EnOcean](https://en.wikipedia.org/wiki/EnOcean) standard is supported by many different vendors. There are switches and sensors of many different kinds, and typically they employ energy harvesting to get power such that no batteries are necessary.
|
||||
@ -19,10 +29,10 @@ The `enocean` component adds support for some of these devices. You will need a
|
||||
|
||||
There is currently support for the following device types within Home Assistant:
|
||||
|
||||
- [Binary Sensor](/components/binary_sensor.enocean/) (wall switches)
|
||||
- [Sensor](/components/sensor.enocean/) (power meters)
|
||||
- [Light](/components/light.enocean/) (dimmers)
|
||||
- [Switch](/components/switch.enocean/)
|
||||
- Binary Sensor (wall switches)
|
||||
- Sensor (power meters)
|
||||
- Light (dimmers)
|
||||
- Switch
|
||||
|
||||
However, only a few devices have been confirmed to work. These are:
|
||||
|
||||
@ -47,3 +57,168 @@ device:
|
||||
required: true
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
|
||||
## {% linkable_title Binary Sensor %}
|
||||
|
||||
This can typically be one of those batteryless wall switches.
|
||||
Tested with:
|
||||
|
||||
- Eltako FT55 which uses the EnOcean PTM 215 module
|
||||
- [TRIO2SYS Wall switches](http://www.trio2sys.fr/index.php/fr/produits-enocean-sans-fil-sans-pile-interoperable/emetteur-sans-fils-sans-pile-interoperable-enocean) which uses the EnOcean PTM210 DB module
|
||||
|
||||
All switches using theses modules are expected to work. Other devices will most likely not work without changing the Home Assistant code.
|
||||
|
||||
## {% linkable_title Configuration %}
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](/components/enocean/) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
binary_sensor:
|
||||
- platform: enocean
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is the 4 bytes long number written on the dimmer.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the switch in the frontend.
|
||||
required: false
|
||||
type: string
|
||||
default: EnOcean binary sensor
|
||||
device_class:
|
||||
description: The [type/class](/components/binary_sensor/) of the sensor to set the icon in the frontend.
|
||||
required: false
|
||||
type: device_class
|
||||
{% endconfiguration %}
|
||||
|
||||
EnOcean binary sensors only generate 'button_pressed' events. The event data has following four fields:
|
||||
|
||||
- **id**: The ID of the device (see configuration).
|
||||
- **pushed**: `1` for a button press, `0` for a button release.
|
||||
- **which**: Always `0` when using the single rocket. `0` or `1` when using the dual rocket switch.
|
||||
- **onoff**: `0` or `1` for either side of the rocket.
|
||||
|
||||
## {% linkable_title Automation example %}
|
||||
|
||||
Sample automation to switch lights on and off:
|
||||
|
||||
```yaml
|
||||
# Example automation to turn lights on/off on button release
|
||||
automation:
|
||||
- alias: hall light switches
|
||||
trigger:
|
||||
platform: event
|
||||
event_type: button_pressed
|
||||
event_data:
|
||||
id: [0xYY, 0xYY, 0xYY, 0xYY]
|
||||
pushed: 0
|
||||
action:
|
||||
service_template: "{% raw %}{% if trigger.event.data.onoff %} light.turn_on {% else %} light.turn_off {%endif %}{% endraw %}"
|
||||
data_template:
|
||||
entity_id: "{% raw %}{% if trigger.event.data.which == 1 %} light.hall_left {% else %} light.hall_right {%endif %}{% endraw %}"
|
||||
```
|
||||
|
||||
## {% linkable_title Light %}
|
||||
|
||||
An EnOcean light can take many forms. Currently only one type has been tested: Eltako FUD61 dimmer.
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](/components/enocean/) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
light:
|
||||
- platform: enocean
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
sender_id: [0xFF,0xC6,0xEA,0x04]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is the 4 bytes long number written on the dimmer.
|
||||
required: true
|
||||
type: list
|
||||
sender_id:
|
||||
description: The Sender ID of the device. This is a 4 bytes long number.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the Ligh in the frontend.
|
||||
required: false
|
||||
default: EnOcean Light
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
|
||||
## {% linkable_title Sensor %}
|
||||
|
||||
The `enocean` sensor platform currently only allows reading out the power measured in a Permundo PSC234 switch.
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](../enocean) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
- platform: enocean
|
||||
name: Television
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is a 4 bytes long number.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the switch
|
||||
required: true
|
||||
default: EnOcean sensor
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
|
||||
## {% linkable_title Switch %}
|
||||
|
||||
An EnOcean switch can take many forms. Currently, only a few types have been tested: Permundo PSC234 and Nod On SIN-2-1-01.
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](/components/enocean/) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
switch:
|
||||
- platform: enocean
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is a 4 bytes long number.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the switch.
|
||||
required: false
|
||||
default: EnOcean Switch
|
||||
type: string
|
||||
channel:
|
||||
description: The number of the channel (typically 0 or 1) for the output channel to switch.
|
||||
required: false
|
||||
default: 0
|
||||
type: integer
|
||||
{% endconfiguration %}
|
||||
|
||||
```yaml
|
||||
# Example entries for a switch with 2 outputs (channels), e.g., the Nod On SIN-2-1-01
|
||||
switch nodon01_0:
|
||||
- platform: enocean
|
||||
id: [0x05,0x04,0x03,0x02]
|
||||
name: enocean_nodon01_0
|
||||
channel: 0
|
||||
|
||||
switch nodon01_1:
|
||||
- platform: enocean
|
||||
id: [0x05,0x04,0x03,0x02]
|
||||
name: enocean_nodon01_1
|
||||
channel: 1
|
||||
```
|
||||
|
||||
@ -1,43 +0,0 @@
|
||||
---
|
||||
layout: page
|
||||
title: "EnOcean Light"
|
||||
description: "Instructions on how to set up EnOcean lights within Home Assistant."
|
||||
date: 2016-05-25 23:49
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: enocean.png
|
||||
ha_category: Light
|
||||
ha_release: 0.21
|
||||
ha_iot_class: "Local Push"
|
||||
---
|
||||
|
||||
An EnOcean light can take many forms. Currently only one type has been tested: Eltako FUD61 dimmer.
|
||||
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](/components/enocean/) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
light:
|
||||
- platform: enocean
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
sender_id: [0xFF,0xC6,0xEA,0x04]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is the 4 bytes long number written on the dimmer.
|
||||
required: true
|
||||
type: list
|
||||
sender_id:
|
||||
description: The Sender ID of the device. This is a 4 bytes long number.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the Ligh in the frontend.
|
||||
required: false
|
||||
default: EnOcean Light
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
@ -1,39 +0,0 @@
|
||||
---
|
||||
layout: page
|
||||
title: "EnOcean Sensor"
|
||||
description: "Instructions on how to integrate TellStick sensors into Home Assistant."
|
||||
date: 2016-05-26 01:00
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: enocean.png
|
||||
ha_category: Sensor
|
||||
ha_release: 0.21
|
||||
ha_iot_class: "Local Push"
|
||||
---
|
||||
|
||||
|
||||
The `enocean` sensor platform currently only allows reading out the power measured in a Permundo PSC234 switch.
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](../enocean) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
sensor:
|
||||
- platform: enocean
|
||||
name: Television
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is a 4 bytes long number.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the switch
|
||||
required: true
|
||||
default: EnOcean sensor
|
||||
type: string
|
||||
{% endconfiguration %}
|
||||
@ -1,57 +0,0 @@
|
||||
---
|
||||
layout: page
|
||||
title: "EnOcean Switch"
|
||||
description: "Instructions on how to set up EnOcean switches within Home Assistant."
|
||||
date: 2016-05-25 23:49
|
||||
sidebar: true
|
||||
comments: false
|
||||
sharing: true
|
||||
footer: true
|
||||
logo: enocean.png
|
||||
ha_category: Switch
|
||||
ha_release: 0.21
|
||||
ha_iot_class: "Local Push"
|
||||
---
|
||||
|
||||
An EnOcean switch can take many forms. Currently, only a few types have been tested: Permundo PSC234 and Nod On SIN-2-1-01.
|
||||
|
||||
To use your EnOcean device, you first have to set up your [EnOcean hub](/components/enocean/) and then add the following to your `configuration.yaml` file:
|
||||
|
||||
```yaml
|
||||
# Example configuration.yaml entry
|
||||
switch:
|
||||
- platform: enocean
|
||||
id: [0x01,0x90,0x84,0x3C]
|
||||
```
|
||||
|
||||
{% configuration %}
|
||||
id:
|
||||
description: The ID of the device. This is a 4 bytes long number.
|
||||
required: true
|
||||
type: list
|
||||
name:
|
||||
description: An identifier for the switch.
|
||||
required: false
|
||||
default: EnOcean Switch
|
||||
type: string
|
||||
channel:
|
||||
description: The number of the channel (typically 0 or 1) for the output channel to switch.
|
||||
required: false
|
||||
default: 0
|
||||
type: integer
|
||||
{% endconfiguration %}
|
||||
|
||||
```yaml
|
||||
# Example entries for a switch with 2 outputs (channels), e.g., the Nod On SIN-2-1-01
|
||||
switch nodon01_0:
|
||||
- platform: enocean
|
||||
id: [0x05,0x04,0x03,0x02]
|
||||
name: enocean_nodon01_0
|
||||
channel: 0
|
||||
|
||||
switch nodon01_1:
|
||||
- platform: enocean
|
||||
id: [0x05,0x04,0x03,0x02]
|
||||
name: enocean_nodon01_1
|
||||
channel: 1
|
||||
```
|
||||
Loading…
x
Reference in New Issue
Block a user