mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-23 17:27:19 +00:00
Add Ha release
This commit is contained in:
parent
77cfe71c9f
commit
653994ff47
@ -9,6 +9,7 @@ sharing: true
|
|||||||
footer: true
|
footer: true
|
||||||
logo: mqtt.png
|
logo: mqtt.png
|
||||||
ha_category: Alarm
|
ha_category: Alarm
|
||||||
|
ha_release: 0.7.4
|
||||||
---
|
---
|
||||||
|
|
||||||
The `mqtt` alarm panel platform enables the possibility to control MQTT capable alarm panels. The Alarm icon will change state after receiving a new state from `state_topic`. If these messages are published with *RETAIN* flag, the MQTT alarm panel will receive an instant state update after subscription and will start with the correct state. Otherwise, the initial state will be `unknown`.
|
The `mqtt` alarm panel platform enables the possibility to control MQTT capable alarm panels. The Alarm icon will change state after receiving a new state from `state_topic`. If these messages are published with *RETAIN* flag, the MQTT alarm panel will receive an instant state update after subscription and will start with the correct state. Otherwise, the initial state will be `unknown`.
|
||||||
|
@ -9,6 +9,7 @@ sharing: true
|
|||||||
footer: true
|
footer: true
|
||||||
logo: networx.png
|
logo: networx.png
|
||||||
ha_category: Alarm
|
ha_category: Alarm
|
||||||
|
ha_release: 0.13
|
||||||
---
|
---
|
||||||
|
|
||||||
The `nx584` platform provides integration with GE, Caddx, Interlogix (and other brands) alarm panels that support the NX584 interface module (or have it built in). Supported panels include NX4/6/8/8E. Actual integration is done through [pynx584](http://github.com/kk7ds/pynx584) which is required for this to work.
|
The `nx584` platform provides integration with GE, Caddx, Interlogix (and other brands) alarm panels that support the NX584 interface module (or have it built in). Supported panels include NX4/6/8/8E. Actual integration is done through [pynx584](http://github.com/kk7ds/pynx584) which is required for this to work.
|
||||||
|
@ -9,6 +9,7 @@ sharing: true
|
|||||||
footer: true
|
footer: true
|
||||||
logo: verisure.png
|
logo: verisure.png
|
||||||
ha_category: Alarm
|
ha_category: Alarm
|
||||||
|
ha_release: 0.7.3
|
||||||
---
|
---
|
||||||
|
|
||||||
|
|
||||||
|
@ -9,6 +9,7 @@ sharing: true
|
|||||||
footer: true
|
footer: true
|
||||||
logo: octoprint.png
|
logo: octoprint.png
|
||||||
ha_category: Binary Sensor
|
ha_category: Binary Sensor
|
||||||
|
ha_release: 0.19
|
||||||
---
|
---
|
||||||
|
|
||||||
|
|
||||||
|
@ -9,6 +9,7 @@ sharing: true
|
|||||||
footer: true
|
footer: true
|
||||||
logo: z-wave.png
|
logo: z-wave.png
|
||||||
ha_category: Locks
|
ha_category: Locks
|
||||||
|
ha_release: 0.19
|
||||||
---
|
---
|
||||||
|
|
||||||
To get your Z-Wave locks working with Home Assistant, follow the instructions for the general [Z-Wave component](/components/zwave/).
|
To get your Z-Wave locks working with Home Assistant, follow the instructions for the general [Z-Wave component](/components/zwave/).
|
||||||
|
@ -10,6 +10,7 @@ footer: true
|
|||||||
logo: octoprint.png
|
logo: octoprint.png
|
||||||
ha_category: Hub
|
ha_category: Hub
|
||||||
featured: true
|
featured: true
|
||||||
|
ha_release: 0.19
|
||||||
---
|
---
|
||||||
|
|
||||||
[OctoPrint](http://octoprint.org/) is a web interface for your 3D printer. This is the main component to integrate OctoPrint sensors, you will have to setup sensors and binary sensors separately.
|
[OctoPrint](http://octoprint.org/) is a web interface for your 3D printer. This is the main component to integrate OctoPrint sensors, you will have to setup sensors and binary sensors separately.
|
||||||
|
@ -9,6 +9,7 @@ sharing: true
|
|||||||
footer: true
|
footer: true
|
||||||
logo: octoprint.png
|
logo: octoprint.png
|
||||||
ha_category: Sensor
|
ha_category: Sensor
|
||||||
|
ha_release: 0.19
|
||||||
---
|
---
|
||||||
|
|
||||||
|
|
||||||
|
Loading…
x
Reference in New Issue
Block a user