Z-Wave controllers: add info on Z-Pi 7 on Yellow (#27027)

This commit is contained in:
c0ffeeca7 2023-04-17 09:40:22 +02:00 committed by GitHub
parent 002169069c
commit 65b53c74d5
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 9 additions and 0 deletions

View File

@ -120,3 +120,12 @@ You should also check the README for details on the overlays. You might find it
If you've installed the Z-Wave.Me Z-Way software. In order to use Z-Wave JS instead of Z-Way, you'll need to ensure you disable it before you install Home Assistant, or you won't be able to access the board. Do this with `sudo /etc/init.d/z-way-server stop; sudo update-rc.d z-way-server disable`. Alternatively, you could use the [Z-Wave.Me](/integrations/zwave_me) integration.
</div>
#### Aeotec Z-Pi 7 Raspberry Pi HAT/Shield on Home Assistant Yellow
1. Make sure the Aeotec Z-Pi 7 is properly seated on the Home Assistant Yellow.
![Aeotex Z-Pi 7 on Home Assistant Yellow](/images/docs/z-wave/zpi-7-yellow.jpg).
1. Carefully [close the case](https://yellow.home-assistant.io/guides/add-ssd-existing-installation/#reassembling-top-part) and power up Home Assistant Yellow.
1. Follow the procedure on [setting up a Z-Wave JS server](/integrations/zwave_js/#setting-up-a-z-wave-js-server).
1. In step 2, follow the manual setup steps to install the Z-Wave integration.
1. in Step 4, you will be prompted to choose a **Device path**. Choose **ttyAMA0**.

Binary file not shown.

After

Width:  |  Height:  |  Size: 82 KiB