🚜 Merges/Redirect Egardia component pages (#8526)

* 🚜 Merges/Redirect Egardia component pages

* ✏️ Tweak list

source/_components/alarm_control_panel.egardia.markdown

@@ -1,16 +0,0 @@
----
-layout: page
-title: "Egardia / Woonveilig Alarm Control Panel"
-description: "Instructions on how to integrate Egardia / Woonveilig into Home Assistant."
-date: 2016-07-02 22:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: egardia.png
-ha_release: 0.51
-ha_category: Alarm
----
-
-The `egardia` platform allows you to integrate your [Egardia](http://www.egardia.com)/[Woonveilig](http://www.woonveilig.nl) alarm control panel in Home Assistant.
-You will need to set up your [Egardia hub](/components/egardia/).

source/_components/binary_sensor.egardia.markdown

@@ -1,19 +0,0 @@
----
-layout: page
-title: "Egardia Binary Sensor"
-description: "Instructions on how to integrate Egardia / Woonveilig binary sensors into Home Assistant."
-date: 2018-03-02 09:00
-sidebar: true
-comments: false
-sharing: true
-footer: true
-logo: egardia.png
-ha_release: 0.65
-ha_category: Binary Sensor
-ha_iot_class: "Polling"
----
-
-The `egardia` platform allows you to get data from your [Egardia](http://www.egardia.com)/[Woonveilig](http://www.woonveilig.nl) binary sensors from within Home Assistant.
-Currently only door contacts are supported. IR sensors are not supported and will probably never be since their status cannot be read outside of the alarm control panel. Smoke sensors and others might be added but currently are not supported.
-
-You will need to set up your [Egardia hub](/components/egardia/).

source/_components/egardia.markdown

@@ -7,9 +7,16 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-ha_category: Hub
-ha_release: 0.65
 logo: egardia.png
+ha_category:
+  - Hub
+  - Alarm
+  - Binary Sensor
+ha_release: 0.65
+ha_iot_class: "Polling"
+redirect_from:
+  - /components/alarm_control_panel.egardia/
+  - /components/binary_sensor.egardia/
 ---
 
 The `egardia` platform enables the ability to control an [Egardia](http://egardia.com/)/[Woonveilig](http://woonveilig.nl) control panel. These alarm panels are known under different brand names across the world, including Woonveilig in the Netherlands. This was tested on the WL-1716, GATE-01, GATE-02 and GATE-03 versions of the Egardia/Woonveilig platform. Not only will you integrate your alarm control panel, supported sensors (door contacts at this moment) will be added automatically (hidden by default).
@@ -19,6 +26,7 @@ You will need to know the IP of your alarm panel on your local network. Test if
 ## {% linkable_title Basic configuration %}
 
 To enable the integration with your alarm panel, add the following lines to your `configuration.yaml` file:
+
  ```yaml
     # Example configuration.yaml entry
     egardia:
@@ -115,7 +123,10 @@ There seem to be multiple versions of software running on GATE-02 devices; we ha
        triggered: XXXXXXXXXXXXXXXX, XXXXXXXXXXXXXXXX, XXXXXXXXXXXXXXXX
        ignore: XXXXXXXXXXXXXXXX
    ```
-
 Note that for all code groups (*arm*,*disarm*, etc) multiple codes can be entered since each sensor triggers with a different code and each user of the system has its own arm and disarm codes. Also note that your system will do regular system checks which will be reported as well. Since Home Assistant provides no way of handling them properly, you can enter those codes as *ignore* (again, multiple codes can be used here). The egardia component will ignore these codes and continue returning the old status if it receives any of the codes that are listed as ignore. This is useful for example when you have armed your alarm at night: normally a system check will occur at least once during the night and if that code is not specified anywhere Home Assistant will set the status of the alarm to its default, which is unarmed. This is in fact wrong. Listing the code as ignore changes this behavior and Home Assistant will continue to show the status the alarm is in (disarm, arm, home, triggered) even when system checks occur.
-
 5. Test your setup and enjoy. The component will update if the alarm status changes, including triggers. You can use this to build your own automations and send notifications as you wish. *Note*: previous versions required a separate egardiaserver to be set up. This is no longer necessary and corresponding system services can be removed (using systemctl).
+
+## {% linkable_title Binary Sensor %}
+
+The `egardia` platform allows you to get data from your [Egardia](http://www.egardia.com)/[Woonveilig](http://www.woonveilig.nl) binary sensors from within Home Assistant.
+Currently only door contacts are supported. IR sensors are not supported and will probably never be since their status cannot be read outside of the alarm control panel. Smoke sensors and others might be added but currently are not supported.