Minimizing of the configuration sample (#1011)

source/_components/climate.ecobee.markdown

@@ -10,6 +10,7 @@ footer: true
 logo: ecobee.png
 ha_category: Climate
 ha_release: 0.9
+ha_iot_class: "Cloud Push"
 ---
 
 To get your Ecobee thermostats working with Home Assistant, follow the instructions for the general [Ecobee component](/components/ecobee/).

source/_components/climate.eq3btsmart.markdown

@@ -57,8 +57,15 @@ to the start function of /etc/init.d/hass-daemon.
 ```yaml
 # Example configuration.yaml entry
 climate:
-  platform: eq3btsmart
+  - platform: eq3btsmart
-  devices:
+    devices:
-    room1:
+      room1:
-      mac: '00:11:22:33:44:55'
+        mac: '00:11:22:33:44:55'
 ```
+
+Configuration variables:
+
+- **devices** array (*Required*): List of thermostats.
+  - **[device-name]** (*Required*): The name to use for the thermostat.
+    - **mac** (*Required*): MAC address of the thermostat.
+

source/_components/climate.generic_thermostat.markdown

@@ -9,6 +9,7 @@ sharing: true
 footer: true
 logo: heat-control.png
 ha_category: Climate
+ha_release: pre 0.7
 ---
 
 
@@ -17,29 +18,35 @@ The `generic_thermostat` climate platform is a thermostat implemented in Home As
 ```yaml
 # Example configuration.yaml entry
 climate:
-  platform: generic_thermostat
+  - platform: generic_thermostat
-  name: Study
+    name: Study
-  heater: switch.study_heater
+    heater: switch.study_heater
-  target_sensor: sensor.study_temperature
+    target_sensor: sensor.study_temperature
-  min_temp: 15
-  max_temp: 21
-  target_temp: 15
-  min_cycle_duration:
-  # At least one of these must be specified:
-     days: 2
-     hours: 1
-     minutes: 10
-     seconds: 5
-     milliseconds: 20
 ```
 
 Configuration variables:
 
 - **name** (*Required*): Name of thermostat
-- **heater** (*Required*: `entity_id` for heater switch, must be a toggle device.
+- **heater** (*Required*): `entity_id` for heater switch, must be a toggle device.
 - **target_sensor** (*Required*): `entity_id` for a temperature sensor, target_sensor.state must be temperature.
 - **min_temp** (*Optional*): Set minimum set point available (default: 7)
 - **max_temp** (*Optional*): Set maximum set point available (default: 35)
 - **target_temp** (*Optional*): Set intital target temperature. Failure to set this variable will result in target temperature being set to null on startup.
 - **ac_mode** (*Optional*): Set the switch specified in the *heater* option to be treated as a cooling device instead of a heating device.
 - **min_cycle_duration** (*Optional*): Set a minimum amount of time that the switch specified in the *heater* option must be in it's current state prior to being switched either off or on.
+
+A full configuration example looks like the one below. `min_cycle_duration` must contains at least one of the following entries: `days:`, `hours:`, `minutes:`, `seconds:` or `milliseconds:`.
+
+```yaml
+# Full example configuration.yaml entry
+climate:
+  - platform: generic_thermostat
+    name: Study
+    heater: switch.study_heater
+    target_sensor: sensor.study_temperature
+    min_temp: 15
+    max_temp: 21
+    target_temp: 17
+    min_cycle_duration:
+      seconds: 5
+```

source/_components/climate.honeywell.markdown

@@ -20,8 +20,6 @@ To set it up, add the following information to your `configuration.yaml` file:
 climate:
   platform: honeywell
   username: YOUR_USERNAME
-  password:  YOUR_PASSWORD
-  region: REGION
 ```
 
 Configuration variables:

source/_components/climate.knx.markdown

@@ -24,15 +24,14 @@ To use your KNX thermostats in your installation, add the following to your `con
 # Example configuration.yaml entry
 climate:
   - platform: knx
-    name: KNX Thermostat
     address : KNX_ADDRESS
     temperature_address: 0/1/1
     setpoint_address: 0/1/0
 ```
 
-- **name** (*Optional*): A name for this devices used within Home assistant
 - **address** (*Required*): The KNX group address that is used to turn on/off this actuator channel
 - **temperature_address** (*Required*): The group address that is used to communicate the current temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value), check [details](http://www.knx.org/fileadmin/template/documents/downloads_support_menu/KNX_tutor_seminar_page/Advanced_documentation/05_Interworking_E1209.pdf).
 - **setpoint_address** (*Required*): The group address that is used to set/read the target temperature. Data format must be datapoint type 9.001 DPT_Value_Temp (2-Octet float value). Make sure, you set the read-flag for the thermostat to allow Home Assistant to read the target temperature.
+- **name** (*Optional*): A name for this devices used within Home Assistant
 
 With the current version of the module, no advanced KNX thermostat functionalities (e.g. HVAC mode) are supported.

source/_components/climate.radiotherm.markdown

@@ -24,12 +24,9 @@ The underlaying library supports:
 To set it up, add the following information to your `configuration.yaml` file:
 
 ```yaml
+# Example configuration.yaml entry
 climate:
   platform: radiotherm
-  host:
-    - 192.168.99.137
-    - 192.168.99.202
-  hold_temp: True
 ```
 
 Configuration variables:
@@ -39,3 +36,12 @@ Configuration variables:
 
 Temperature settings from Home Assistant will be sent to thermostat and then hold at that temperature. Set to `False` if you set a thermostat schedule on the thermostat itself and just want Home Assistant to send temporary temperature changes.
 
+Multiple thermostats could be assigned by using `host:` if auto-detetion is not used.
+
+```yaml
+climate:
+  platform: radiotherm
+  host:
+    - 192.168.99.137
+    - 192.168.99.202
+```