Update light.knx.markdown

Since the pull request #12411 the color is supported in KNX Light.

This solves issue #5385 (KNX Light : documentation not accurate )
This commit is contained in:
Adrian Scillato 2018-05-18 11:59:19 -03:00 committed by GitHub
parent 3a5ba531b1
commit 6b1f723d29
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

View File

@ -36,6 +36,7 @@ Configuration variables:
- **brightness_address** (Optional): KNX group address for dimming light.
- **state_address** (*Optional*): separate KNX group address for retrieving the switch state of the light.
- **brightness_state_address** (*Optional*): separate KNX group address for retrieving the dimmed state of the light.
- **color_address** (*Optional*): separate KNX group address for setting the color of the light.
Some KNX devices can change their state internally without any messages on the KNX bus, e.g., if you configure a timer on a channel. The optional `state_address` can be used to inform Home Assistant about these state changes. If a KNX message is seen on the bus addressed to the given state address, this will overwrite the state of the switch object.
For switching/light actuators that are only controlled by a single group address and can't change their state internally, you don't have to configure the state address.