diff --git a/source/_integrations/harman_kardon_avr.markdown b/source/_integrations/harman_kardon_avr.markdown
index fb9b26078fc..f4c3077e287 100644
--- a/source/_integrations/harman_kardon_avr.markdown
+++ b/source/_integrations/harman_kardon_avr.markdown
@@ -2,7 +2,7 @@
 title: Harman Kardon AVR
 description: Instructions on how to integrate Harman Kardon AVR Network Receivers into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Polling
 ha_release: 0.85
 ha_domain: harman_kardon_avr
diff --git a/source/_integrations/hassio.markdown b/source/_integrations/hassio.markdown
index df69cb274b1..88bf658e686 100644
--- a/source/_integrations/hassio.markdown
+++ b/source/_integrations/hassio.markdown
@@ -2,7 +2,7 @@
 title: Home Assistant Supervisor
 description: Control Supervisor Add-ons and OS from Home Assistant
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Sensor
   - Update
 ha_iot_class: Local Polling
diff --git a/source/_integrations/hddtemp.markdown b/source/_integrations/hddtemp.markdown
index fa2a1851805..4f6bc851ef0 100644
--- a/source/_integrations/hddtemp.markdown
+++ b/source/_integrations/hddtemp.markdown
@@ -2,7 +2,7 @@
 title: hddtemp
 description: Instructions on how to integrate hard drive temperature information into Home Assistant.
 ha_category:
-  - System Monitor
+  - System monitor
 ha_release: 0.32
 ha_iot_class: Local Polling
 ha_domain: hddtemp
diff --git a/source/_integrations/heos.markdown b/source/_integrations/heos.markdown
index a0b73df97d4..cb12ee09b6a 100644
--- a/source/_integrations/heos.markdown
+++ b/source/_integrations/heos.markdown
@@ -2,7 +2,7 @@
 title: Denon HEOS
 description: Instructions on how to integrate Denon HEOS into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.92
 ha_iot_class: Local Push
 ha_config_flow: true
diff --git a/source/_integrations/hexaom.markdown b/source/_integrations/hexaom.markdown
index f8dc82274b1..91774307654 100644
--- a/source/_integrations/hexaom.markdown
+++ b/source/_integrations/hexaom.markdown
@@ -3,7 +3,7 @@ title: Hexaom Hexaconnect
 description: Connect and control your Hexaom Hexaconnect devices using the Overkiz integration
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -16,7 +16,7 @@ ha_category:
   - Sensor
   - Siren
   - Switch
-  - Water Heater
+  - Water heater
 ha_domain: hexaom
 ha_integration_type: virtual
 ha_supporting_domain: overkiz
diff --git a/source/_integrations/hi_kumo.markdown b/source/_integrations/hi_kumo.markdown
index e30c1cb547c..e7f1f05863b 100644
--- a/source/_integrations/hi_kumo.markdown
+++ b/source/_integrations/hi_kumo.markdown
@@ -3,7 +3,7 @@ title: Hitachi Hi Kumo
 description: Connect and control your Hitachi Hi Kumo devices using the Overkiz integration
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -16,7 +16,7 @@ ha_category:
   - Sensor
   - Siren
   - Switch
-  - Water Heater
+  - Water heater
 ha_domain: hi_kumo
 ha_integration_type: virtual
 ha_supporting_domain: overkiz
diff --git a/source/_integrations/hikvision.markdown b/source/_integrations/hikvision.markdown
index 73b267730d2..3740c932370 100644
--- a/source/_integrations/hikvision.markdown
+++ b/source/_integrations/hikvision.markdown
@@ -2,7 +2,7 @@
 title: Hikvision
 description: Instructions on how to set up Hikvision camera binary sensors within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
 ha_release: 0.35
 ha_iot_class: Local Push
 ha_codeowners:
diff --git a/source/_integrations/hitron_coda.markdown b/source/_integrations/hitron_coda.markdown
index 58e0518b8d3..e205d8dc511 100644
--- a/source/_integrations/hitron_coda.markdown
+++ b/source/_integrations/hitron_coda.markdown
@@ -2,7 +2,7 @@
 title: Rogers Hitron CODA
 description: Instructions on how to integrate Hitron CODA Routers into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_release: 0.58
 ha_domain: hitron_coda
 ha_iot_class: Local Polling
diff --git a/source/_integrations/hive.markdown b/source/_integrations/hive.markdown
index 0ee2da5df69..1835055ce6d 100644
--- a/source/_integrations/hive.markdown
+++ b/source/_integrations/hive.markdown
@@ -3,13 +3,13 @@ title: Hive
 description: Instructions on how to integrate Hive devices with Home Assistant.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Hub
   - Light
   - Sensor
   - Switch
-  - Water Heater
+  - Water heater
 ha_release: 0.59
 ha_iot_class: Cloud Polling
 ha_codeowners:
@@ -123,7 +123,7 @@ script:
 
 ## Platforms
 
-### Alarm Control Panel
+### Alarm control panel
 
 The `hive` alarm control panel integration integrates your Hive alarm into Home Assistant.
 
@@ -131,7 +131,7 @@ The platform supports the following Hive devices:
 
 - Hive Home Shield
 
-### Binary Sensor
+### Binary sensor
 
 The `hive` binary sensor integration integrates your Hive sensors into Home Assistant.
 
@@ -185,7 +185,7 @@ The platform supports the following Hive products:
 - Hive Active Plug
 - Hive Heat on Demand
 
-### Water Heater
+### Water heater
 
 The `hive` water heater platform integrates your Hive hot water into Home Assistant, enabling control of setting the **mode**.
 
diff --git a/source/_integrations/home_connect.markdown b/source/_integrations/home_connect.markdown
index 21cc2ee5d53..9bd0c1e78df 100644
--- a/source/_integrations/home_connect.markdown
+++ b/source/_integrations/home_connect.markdown
@@ -2,7 +2,7 @@
 title: Home Connect
 description: Instructions on how to set up the Home Connect integration within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Hub
   - Light
   - Sensor
diff --git a/source/_integrations/homekit.markdown b/source/_integrations/homekit.markdown
index 7a6dba3ec20..de40cf9a7c7 100644
--- a/source/_integrations/homekit.markdown
+++ b/source/_integrations/homekit.markdown
@@ -423,7 +423,7 @@ The following integrations are currently supported:
 | water_heater | WaterHeater | All `water_heater` devices. |
 | device_automation | DeviceTriggerAccessory | All devices that support triggers. |
 
-# Device Triggers
+# Device triggers
 
 Devices that support triggers can be added to the bridge by accessing options for the bridge in **{% my integrations title="Settings > Devices & Services" %}**. To use this feature, Advanced Mode must be enabled in your user profile.
 
diff --git a/source/_integrations/homekit_controller.markdown b/source/_integrations/homekit_controller.markdown
index f3c3363ea55..911968d75b5 100644
--- a/source/_integrations/homekit_controller.markdown
+++ b/source/_integrations/homekit_controller.markdown
@@ -3,7 +3,7 @@ title: HomeKit Device
 description: Instructions for how to integrate your HomeKit devices within Home Assistant.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Cover
   - Fan
@@ -185,18 +185,18 @@ This section describes how to add a HomeKit [compatible device](#supported-devic
 
 There is currently support for the following device types (also called *domains*) within Home Assistant. They are listed with their default types.
 
-- Alarm Control Panel (HomeKit security system)
+- Alarm control panel (HomeKit security system)
 - Climate (HomeKit thermostats and air conditioners)
 - Cover (HomeKit garage door openers, windows, or window coverings)
 - Light (HomeKit lights)
 - Lock (HomeKit lock)
 - Switch (HomeKit switches, outlets and valves)
-- Binary Sensor (HomeKit motion, contact, occupancy, carbon monoxide and smoke sensors)
+- Binary sensor (HomeKit motion, contact, occupancy, carbon monoxide and smoke sensors)
 - Sensor (HomeKit humidity, temperature, co2 and light level sensors)
 - Fan
-- Air Quality
+- Air quality
 - Humidifier (HomeKit humidifiers and dehumidifiers)
-- Automation Triggers (HomeKit 'stateless' accessories like buttons, remotes and doorbells)
+- Automation triggers (HomeKit 'stateless' accessories like buttons, remotes and doorbells)
 
 <div class='note'>
 
diff --git a/source/_integrations/homematic.markdown b/source/_integrations/homematic.markdown
index f1dd050a153..bcc2948f65c 100644
--- a/source/_integrations/homematic.markdown
+++ b/source/_integrations/homematic.markdown
@@ -2,7 +2,7 @@
 title: Homematic
 description: Instructions for integrating Homematic into Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Cover
   - Hub
@@ -34,7 +34,7 @@ If you are using Homegear with paired [Intertechno](https://intertechno.at/) dev
 
 There is currently support for the following device types within Home Assistant:
 
-- Binary Sensor
+- Binary sensor
 - Climate
 - Cover
 - Light
diff --git a/source/_integrations/homematicip_cloud.markdown b/source/_integrations/homematicip_cloud.markdown
index 35262f9b6bf..5da3de12d45 100644
--- a/source/_integrations/homematicip_cloud.markdown
+++ b/source/_integrations/homematicip_cloud.markdown
@@ -3,7 +3,7 @@ title: HomematicIP Cloud
 description: Instructions for integrating HomematicIP into Home Assistant.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -36,7 +36,7 @@ The [HomematicIP](https://www.homematic-ip.com/) integration platform is used as
 There is currently support for the following device types within Home Assistant:
 
 - Alarm
-- Binary Sensor
+- Binary sensor
 - Button
 - Climate
 - Cover
diff --git a/source/_integrations/homeseer.markdown b/source/_integrations/homeseer.markdown
index 4f772f83a56..9d999eddcaa 100644
--- a/source/_integrations/homeseer.markdown
+++ b/source/_integrations/homeseer.markdown
@@ -4,7 +4,7 @@ description: Connect and control your HomeSeer Z-Wave devices using the Z-Wave i
 ha_release: '2023.4'
 ha_iot_class: Local Push
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Light
   - Sensor
   - Switch
diff --git a/source/_integrations/horizon.markdown b/source/_integrations/horizon.markdown
index 351edd23674..ca43d588fdd 100644
--- a/source/_integrations/horizon.markdown
+++ b/source/_integrations/horizon.markdown
@@ -2,7 +2,7 @@
 title: Unitymedia Horizon HD Recorder
 description: Instructions how to integrate the Unitymedia Horizon HD Recorder into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Polling
 ha_release: 0.72
 ha_domain: horizon
diff --git a/source/_integrations/hp_ilo.markdown b/source/_integrations/hp_ilo.markdown
index 1f0cbe9c013..d25414cb672 100644
--- a/source/_integrations/hp_ilo.markdown
+++ b/source/_integrations/hp_ilo.markdown
@@ -2,7 +2,7 @@
 title: HP Integrated Lights-Out (ILO)
 description: How to integrate HP ILO (Integrated Lights-Out) sensors within Home Assistant.
 ha_category:
-  - System Monitor
+  - System monitor
 ha_release: 0.27
 ha_iot_class: Local Polling
 ha_domain: hp_ilo
diff --git a/source/_integrations/http.markdown b/source/_integrations/http.markdown
index 868622030f1..dcaff9ba899 100644
--- a/source/_integrations/http.markdown
+++ b/source/_integrations/http.markdown
@@ -16,7 +16,7 @@ The `http` integration serves all files and data required for the Home Assistant
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Sensor](#sensor)
 
 <div class='note'>
@@ -162,7 +162,7 @@ If you want to use Home Assistant to host or serve static files then create a di
 
 </div>
 
-## Binary Sensor
+## Binary sensor
 
 The HTTP binary sensor is dynamically created with the first request that is made to its URL. You don't have to define it in the configuration first.
 
@@ -289,4 +289,4 @@ $ curl -X GET -H "Authorization: Bearer LONG_LIVED_ACCESS_TOKEN" \
 }
 ```
 
-For more examples please visit the [HTTP Binary Sensor](#examples) page.
+For more examples please visit the [HTTP binary sensor](#examples) page.
diff --git a/source/_integrations/huawei_lte.markdown b/source/_integrations/huawei_lte.markdown
index 70332c549a0..f03caac2908 100644
--- a/source/_integrations/huawei_lte.markdown
+++ b/source/_integrations/huawei_lte.markdown
@@ -2,10 +2,10 @@
 title: Huawei LTE
 description: Instructions on how to integrate Huawei LTE router and modem devices with Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Network
   - Notifications
-  - Presence Detection
+  - Presence detection
   - Sensor
   - Switch
 ha_release: 0.79
diff --git a/source/_integrations/hydrawise.markdown b/source/_integrations/hydrawise.markdown
index ae3d633d1f0..1485c4ce9d6 100644
--- a/source/_integrations/hydrawise.markdown
+++ b/source/_integrations/hydrawise.markdown
@@ -2,7 +2,7 @@
 title: Hunter Hydrawise
 description: Instructions on how to integrate your Hunter Hydrawise Wi-Fi irrigation control system within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Irrigation
   - Sensor
   - Switch
@@ -24,7 +24,7 @@ The `hydrawise` integration allows you to integrate your [Hunter Hydrawise](http
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Sensor](#sensor)
 - [Switch](#switch)
 
diff --git a/source/_integrations/iaqualink.markdown b/source/_integrations/iaqualink.markdown
index db0b459dfc2..9a832875b36 100644
--- a/source/_integrations/iaqualink.markdown
+++ b/source/_integrations/iaqualink.markdown
@@ -2,7 +2,7 @@
 title: Jandy iAqualink
 description: Instructions on how to configure Jandy iAqualink integration.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Light
   - Sensor
@@ -26,7 +26,7 @@ ha_integration_type: integration
 
 There is currently support for the following device types within Home Assistant:
 
-- Binary Sensor
+- Binary sensor
 - Climate
 - Light
 - Sensor
diff --git a/source/_integrations/ibeacon.markdown b/source/_integrations/ibeacon.markdown
index 0ad3e5ec633..dc3f54b77e0 100644
--- a/source/_integrations/ibeacon.markdown
+++ b/source/_integrations/ibeacon.markdown
@@ -2,8 +2,8 @@
 title: iBeacon Tracker
 description: Instructions on how to integrate iBeacon devices into Home Assistant.
 ha_category:
-  - Device Tracker
-  - Presence Detection
+  - Device tracker
+  - Presence detection
   - Sensor
 ha_release: '2022.10'
 ha_iot_class: Local Push
diff --git a/source/_integrations/icloud.markdown b/source/_integrations/icloud.markdown
index aeb9bd5b80b..5dfe2d2cd89 100644
--- a/source/_integrations/icloud.markdown
+++ b/source/_integrations/icloud.markdown
@@ -2,7 +2,7 @@
 title: Apple iCloud
 description: Instructions on how to use iCloud to track devices in Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
   - Sensor
 ha_iot_class: Cloud Polling
 ha_release: '0.10'
@@ -21,7 +21,7 @@ The `icloud` integration allows you to detect presence using the [iCloud](https:
 
 There is currently support for the following platforms within Home Assistant:
 
-- [Device Tracker](#device-tracker)
+- [Device tracker](#device-tracker)
 - [Sensor](#sensor)
 
 It does require that your devices are registered with the [Find My](https://www.apple.com/icloud/find-my/) service.
@@ -46,7 +46,7 @@ Go into your Home Assistant configuration `.storage` folder and delete the `iclo
 
 ## Platforms
 
-### Device Tracker
+### Device tracker
 
 The iCloud integration will track available devices on your iCloud account.
 
diff --git a/source/_integrations/ihc.markdown b/source/_integrations/ihc.markdown
index 3046294ccfb..c4f0a6eb05d 100644
--- a/source/_integrations/ihc.markdown
+++ b/source/_integrations/ihc.markdown
@@ -2,7 +2,7 @@
 title: IHC Controller
 description: Instructions on how to integrate the IHC integrations with Home Assistant
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Hub
   - Light
   - Sensor
@@ -22,7 +22,7 @@ IHC Controller integration for Home Assistant allows you to connect the LK IHC c
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Sensor](#sensor)
 - [Light](#light)
 - [Switch](#switch)
diff --git a/source/_integrations/image_processing.markdown b/source/_integrations/image_processing.markdown
index fb4a055e030..6c5a31e50bf 100644
--- a/source/_integrations/image_processing.markdown
+++ b/source/_integrations/image_processing.markdown
@@ -1,8 +1,8 @@
 ---
-title: Image Processing
+title: Image processing
 description: Instructions on how to setup image processing with Home Assistant.
 ha_category:
-  - Image Processing
+  - Image processing
 ha_release: 0.36
 ha_domain: image_processing
 ha_quality_scale: internal
diff --git a/source/_integrations/incomfort.markdown b/source/_integrations/incomfort.markdown
index 8c5077094ad..8eb1cff3fb8 100644
--- a/source/_integrations/incomfort.markdown
+++ b/source/_integrations/incomfort.markdown
@@ -2,10 +2,10 @@
 title: Intergas InComfort/Intouch Lan2RF gateway
 description: Instructions on how to integrate an Intergas Lan2RF gateway with Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Sensor
-  - Water Heater
+  - Water heater
 ha_release: 0.93
 ha_iot_class: Local Polling
 ha_codeowners:
@@ -25,11 +25,11 @@ It uses the [incomfort](https://pypi.org/project/incomfort-client/) client libra
 
 ### Boiler
 
-The boiler is represented as a **Water Heater** device. It will report the boiler's `state` and `current_temperature`. The gateway does not expose any means to directly control the boiler or change its configuration.
+The boiler is represented as a **Water heater** device. It will report the boiler's `state` and `current_temperature`. The gateway does not expose any means to directly control the boiler or change its configuration.
 
 Note that the `current_temperature` will switch between the CV (circulating volume) and Tap temperatures according to the current operating mode of the boiler.  If the boiler is neither pumping nor tapping, it will be reported as the higher of the two.
 
-In addition, there is a **Sensor** for each of CV pressure, CV temperature, and Tap temperature, and a **Binary Sensor** that will be `on` if there is a fault with the boiler (the fault code will be a state attribute).
+In addition, there is a **Sensor** for each of CV pressure, CV temperature, and Tap temperature, and a **Binary sensor** that will be `on` if there is a fault with the boiler (the fault code will be a state attribute).
 
 ### Rooms
 
diff --git a/source/_integrations/insteon.markdown b/source/_integrations/insteon.markdown
index ce459b1eea8..b815aba3616 100644
--- a/source/_integrations/insteon.markdown
+++ b/source/_integrations/insteon.markdown
@@ -2,7 +2,7 @@
 title: Insteon
 description: Instructions on how to set up an Insteon Modem (PLM or Hub) locally within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Cover
   - Fan
   - Hub
diff --git a/source/_integrations/intellifire.markdown b/source/_integrations/intellifire.markdown
index f1cdd9e5e4a..a8e4a5a5c5e 100644
--- a/source/_integrations/intellifire.markdown
+++ b/source/_integrations/intellifire.markdown
@@ -2,7 +2,7 @@
 title: IntelliFire
 description: Instructions on the IntelliFire Fireplace integration for Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Fan
   - Light
@@ -70,9 +70,9 @@ The integration uses a Number entity to control flame height. Valid flame height
 
 ### Sensor Types
 
-The following sensors are available as either a **Binary Sensor** when dealing with on/off.
+The following sensors are available as a **binary sensor** when dealing with on/off.
 
-### Binary Sensors
+### Binary sensors
 
 - **Flame Sensor**: Whether the fire is on.
 - **Pilot Light Sensor**: Whether the pilot light is turned on.
diff --git a/source/_integrations/iperf3.markdown b/source/_integrations/iperf3.markdown
index 09eceab51ad..026f3e972c4 100644
--- a/source/_integrations/iperf3.markdown
+++ b/source/_integrations/iperf3.markdown
@@ -3,7 +3,7 @@ title: Iperf3
 description: How to use Iperf3 within Home Assistant to measure your network bandwidth.
 ha_category:
   - Sensor
-  - System Monitor
+  - System monitor
 ha_release: 0.71
 ha_iot_class: Local Polling
 ha_codeowners:
diff --git a/source/_integrations/ipp.md b/source/_integrations/ipp.md
index 034db3750fe..ffbcdb21318 100644
--- a/source/_integrations/ipp.md
+++ b/source/_integrations/ipp.md
@@ -2,7 +2,7 @@
 title: Internet Printing Protocol (IPP)
 description: Instructions on how to integrate printers that support the Internet Printing Protocol (IPP) into Home Assistant.
 ha_category:
-  - System Monitor
+  - System monitor
 ha_release: 0.108
 ha_iot_class: Local Polling
 ha_config_flow: true
diff --git a/source/_integrations/isy994.markdown b/source/_integrations/isy994.markdown
index 8a7b5a1c9cb..cf244056372 100644
--- a/source/_integrations/isy994.markdown
+++ b/source/_integrations/isy994.markdown
@@ -2,7 +2,7 @@
 title: Universal Devices ISY/IoX
 description: Instructions on how to setup an ISY controller within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -44,7 +44,7 @@ This integration supports the legacy ISY994 hardware family, as well as current
 
 There is currently support for the following platforms within Home Assistant:
 
-- Binary Sensor
+- Binary sensor
 - Button
 - Climate
 - Cover
@@ -75,9 +75,9 @@ There are several options available to further customize what is imported from t
 
 ### Sensors
 
-An Insteon door/window sensor will show up as a single Binary Sensor rather than two discrete devices like it does in the ISY Admin Console. Note that when in "Two Nodes" mode, the sensor will have an UNKNOWN state until the sensor changes for the first time since the last Home Assistant reboot. If you do not use Insteon scenes that are controlled directly from the door sensor, you may prefer to set the sensor to "One Node" mode using the ISY Admin Panel.
+An Insteon door/window sensor will show up as a single binary sensor rather than two discrete devices like it does in the ISY Admin Console. Note that when in "Two Nodes" mode, the sensor will have an UNKNOWN state until the sensor changes for the first time since the last Home Assistant reboot. If you do not use Insteon scenes that are controlled directly from the door sensor, you may prefer to set the sensor to "One Node" mode using the ISY Admin Panel.
 
-Each Insteon leak sensor will also show up as a single Binary Sensor as opposed to the two nodes seen in the ISY Admin Console. The name of the device will be based on what the parent node is named in the ISY, which is typically the one with "-Dry" at the end of the name. This may be confusing, because "On" means wet in Home Assistant. You can rename this node in Home Assistant to be more clear, see the [Customization section](/docs/configuration/customizing-devices/) of your configuration.
+Each Insteon leak sensor will also show up as a single binary sensor as opposed to the two nodes seen in the ISY Admin Console. The name of the device will be based on what the parent node is named in the ISY, which is typically the one with "-Dry" at the end of the name. This may be confusing, because "On" means wet in Home Assistant. You can rename this node in Home Assistant to be more clear, see the [Customization section](/docs/configuration/customizing-devices/) of your configuration.
 
 If your leak or door/window sensor supports heartbeats, a new binary_sensor device will be added to Home Assistant to represent the battery state. The sensor will stay "Off" so long as the daily heartbeats occur. If a heartbeat is missed, the sensor will flip to "On". The name of this device will be based on the heartbeat node in the ISY.
 
diff --git a/source/_integrations/itunes.markdown b/source/_integrations/itunes.markdown
index 3da8a0addd0..c3713cbf822 100644
--- a/source/_integrations/itunes.markdown
+++ b/source/_integrations/itunes.markdown
@@ -2,7 +2,7 @@
 title: Apple iTunes
 description: Instructions on how to integrate iTunes into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_release: 0.7.3
 ha_iot_class: Local Polling
 ha_domain: itunes
diff --git a/source/_integrations/jellyfin.markdown b/source/_integrations/jellyfin.markdown
index c005d05ca52..c28a2fd8fc5 100644
--- a/source/_integrations/jellyfin.markdown
+++ b/source/_integrations/jellyfin.markdown
@@ -2,8 +2,8 @@
 title: Jellyfin
 description: Instructions on how to integrate the Jellyfin integration into Home Assistant.
 ha_category:
-  - Media Player
-  - Media Source
+  - Media player
+  - Media source
   - Sensor
 ha_release: '2021.12'
 ha_iot_class: Local Polling
@@ -19,8 +19,8 @@ ha_platforms:
 ha_integration_type: service
 ---
 
-The Jellyfin integration exposes a [Jellyfin](https://jellyfin.org/) server as a Media Source in Home Assistant.
-Support is currently limited to music, movie and tvshow libraries only. Other libraries will not appear in the Media Browser. This integration has been tested with Jellyfin server version 10.6.4 and later.
+The Jellyfin integration exposes a [Jellyfin](https://jellyfin.org/) server as a media source in Home Assistant.
+Support is currently limited to music, movie and TV show libraries only. Other libraries will not appear in the media browser. This integration has been tested with Jellyfin server version 10.6.4 and later.
 
 Additionally, this integration sets up every media session connected to the Jellyfin
 server as a media player in Home Assistant to provide media controls for each session.
diff --git a/source/_integrations/kaleidescape.markdown b/source/_integrations/kaleidescape.markdown
index 739fd538733..f0919231401 100644
--- a/source/_integrations/kaleidescape.markdown
+++ b/source/_integrations/kaleidescape.markdown
@@ -2,7 +2,7 @@
 title: Kaleidescape
 description: Instructions on how to integrate Kaleidescape into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
   - Remote
   - Sensor
 ha_release: '2022.4'
@@ -34,9 +34,9 @@ This integration is intended for the automation of Kaleidescape players with a m
 
 {% include integrations/config_flow.md %}
 
-## Media Player
+## Media player
 
-The Kaleidescape media player platform will create a [Media Player](/integrations/media_player/) entity for the device. This entity will display the currently playing media and playback controls.
+The Kaleidescape media player platform will create a [media player](/integrations/media_player/) entity for the device. This entity will display the currently playing media and playback controls.
 
 ## Remote
 
diff --git a/source/_integrations/keba.markdown b/source/_integrations/keba.markdown
index 2cde4e5dad6..02128a9cb18 100644
--- a/source/_integrations/keba.markdown
+++ b/source/_integrations/keba.markdown
@@ -2,7 +2,7 @@
 title: Keba Charging Station
 description: Instructions on how to setup your Keba charging station with Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Lock
   - Notifications
   - Sensor
@@ -23,7 +23,7 @@ The `keba` integrates your Keba charging station/BMW Wallbox into your Home Assi
 
 This integration provides the following platforms:
 
-- Binary Sensors: Online state, plug state, Charging state and failsafe mode state.
+- Binary sensors: Online state, plug state, charging state and failsafe mode state.
 - Lock: Authorization (like with the RFID card).
 - Sensors: current set by the user, target energy set by the user, charging power, charged energy of the current session and total energy charged.
 - Services: authorize, deauthorize, set energy target, set the maximum allowed current and manually update the states. More details can be found [here](/integrations/keba/#services).
diff --git a/source/_integrations/keenetic_ndms2.markdown b/source/_integrations/keenetic_ndms2.markdown
index 643fcad6ada..87c00786a4f 100644
--- a/source/_integrations/keenetic_ndms2.markdown
+++ b/source/_integrations/keenetic_ndms2.markdown
@@ -2,7 +2,7 @@
 title: Keenetic NDMS2 Router
 description: Instructions on how to integrate Keenetic NDMS2 Routers into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_iot_class: Local Polling
 ha_release: 0.54
 ha_codeowners:
diff --git a/source/_integrations/kef.markdown b/source/_integrations/kef.markdown
index 53b3360e082..27644471ecf 100644
--- a/source/_integrations/kef.markdown
+++ b/source/_integrations/kef.markdown
@@ -2,7 +2,7 @@
 title: KEF
 description: Instructions on how to integrate KEF Speakers into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Polling
 ha_release: 0.104
 ha_codeowners:
diff --git a/source/_integrations/knx.markdown b/source/_integrations/knx.markdown
index 2f8cd67fd97..1bbaca3d697 100644
--- a/source/_integrations/knx.markdown
+++ b/source/_integrations/knx.markdown
@@ -3,7 +3,7 @@ title: KNX
 description: Instructions on how to integrate KNX components with Home Assistant.
 featured: true
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
@@ -56,7 +56,7 @@ The integration requires a local KNX/IP interface or router. Through this, it wi
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Button](#button)
 - [Climate](#climate)
 - [Cover](#cover)
diff --git a/source/_integrations/kodi.markdown b/source/_integrations/kodi.markdown
index 5276b49996b..2998e7e6120 100644
--- a/source/_integrations/kodi.markdown
+++ b/source/_integrations/kodi.markdown
@@ -2,8 +2,8 @@
 title: Kodi
 description: Instructions on how to integrate Kodi into Home Assistant.
 ha_category:
-  - Media Player
-  - Media Source
+  - Media player
+  - Media source
   - Notifications
 ha_release: pre 0.7
 ha_iot_class: Local Push
@@ -24,7 +24,7 @@ The preferred way to set up the Kodi platform is through discovery, which requir
 
 There is currently support for the following device types within Home Assistant:
 
-- [Media Player](#configuration)
+- [Media player](#configuration)
 - [Notifications](#notifications)
 
 {% include integrations/config_flow.md %}
@@ -39,7 +39,7 @@ If you do not remove it, your configuration will be imported with the following
 
 You can customize your turn on and off actions through automations. Simply use the relevant Kodi device triggers and your automation will be called to perform the `turn_on` or `turn_off` sequence; see the [Kodi turn on/off samples](#kodi-turn-onoff-samples) section for scripts that can be used.
 
-These automations can be configured through the UI (see [Device Triggers](/docs/automation/trigger/#device-triggers) for automations).  If you prefer YAML, you'll need to get the device ID from the UI automation editor.  Automations would be of the form:
+These automations can be configured through the UI (see [device triggers](/docs/automation/trigger/#device-triggers) for automations).  If you prefer YAML, you'll need to get the device ID from the UI automation editor.  Automations would be of the form:
 
 ```yaml
 automation:
diff --git a/source/_integrations/konnected.markdown b/source/_integrations/konnected.markdown
index 7111f8cb749..717107ad37d 100644
--- a/source/_integrations/konnected.markdown
+++ b/source/_integrations/konnected.markdown
@@ -3,7 +3,7 @@ title: Konnected.io
 description: Connect wired alarm sensors and siren using the NodeMCU based Konnected Alarm Panel
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Sensor
   - Switch
 ha_iot_class: Local Push
@@ -38,7 +38,7 @@ Always ensure your panel is running the [latest firmware](https://help.konnected
 
 The integration currently supports the following device types in Home Assistant:
 
-- Binary Sensor: Wired door and window sensors, motion detectors, glass-break detectors, leak sensors, smoke & CO detectors or any open/close switch.
+- Binary sensor: Wired door and window sensors, motion detectors, glass-break detectors, leak sensors, smoke & CO detectors or any open/close switch.
 - Switch: Actuate a siren, strobe, buzzer or relay module.
 - Sensor: Periodic measurements from DHT temperature/humidity sensors and DS18B20 temperature sensors.
 
@@ -75,9 +75,9 @@ The settings for each panel can be accessed by selecting the entry in **Settings
 The settings UI starts by having you configure the general behavior of each zone. You need to specify `Disabled`, `Binary Sensor`, `Digital Sensor`, or `Switchable Output` for each zone.  After that, you'll be prompted, for each zone that is not disabled, to configure details of the zones' behavior. All zones will allow entry of a Name. Additional fields depend on how you configured the general behavior of the zone.  
 **Note some zones do not support all behaviors. The UI will reflect specific options available to each zone.**
 
-##### Binary Sensor:
+##### Binary sensor:
 
-**Binary Sensor Type:** The type of sensor connected to the zone.
+**Binary sensor type:** The type of sensor connected to the zone.
 
 **Name (optional)** The friendly name for the entity associated with the zone.
 
@@ -115,7 +115,7 @@ Once all zones are configured you'll be presented with the configuration for add
 
 **Override API host URL (optional):** The host info to use if you checked **Override default Home Assistant API host panel URL** in the step above. This is ignored if **Override default Home Assistant API host panel URL** is unchecked.
 
-### YAML Configuration
+### YAML configuration
 
 If you prefer you can utilize a `konnected` section in the `configuration.yaml` file that specifies the Konnected devices on the network and the sensors or actuators attached to them. If using `configuration.yaml` the configuration will be one-time imported when going through the Configuration Flow for the panel. **Note that you must still complete the UI based setup before the integration will be configured and entities created/accessible.**
 
diff --git a/source/_integrations/laundrify.markdown b/source/_integrations/laundrify.markdown
index 17efc18d679..ed0637eed1a 100644
--- a/source/_integrations/laundrify.markdown
+++ b/source/_integrations/laundrify.markdown
@@ -2,7 +2,7 @@
 title: laundrify
 description: Instructions on how to integrate laundrify within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
 ha_release: 2022.6
 ha_iot_class: Cloud Polling
 ha_domain: laundrify
@@ -18,7 +18,7 @@ Monitor the status of your washing machine or dryer within Home Assistant using
 
 The following device types are currently supported by the integration:
 
-- Binary Sensor
+- Binary sensor
 
 ## Generate an Auth Code
 
diff --git a/source/_integrations/lcn.markdown b/source/_integrations/lcn.markdown
index 73a37be7814..499f22f59c6 100644
--- a/source/_integrations/lcn.markdown
+++ b/source/_integrations/lcn.markdown
@@ -2,7 +2,7 @@
 title: LCN
 description: Instructions on how to integrate LCN components with Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Cover
   - Hub
@@ -33,7 +33,7 @@ With this setup sending and receiving commands to and from LCN modules is possib
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Climate](#climate)
 - [Cover](#cover)
 - [Light](#light)
diff --git a/source/_integrations/ld2410_ble.markdown b/source/_integrations/ld2410_ble.markdown
index 6d18b46a17a..b72511848d7 100644
--- a/source/_integrations/ld2410_ble.markdown
+++ b/source/_integrations/ld2410_ble.markdown
@@ -2,7 +2,7 @@
 title: LD2410 BLE
 description: Instructions on how to integrate LD2410 BLE devices into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
   - Sensor
 ha_bluetooth: true
 ha_release: 2023.2
diff --git a/source/_integrations/legrand.markdown b/source/_integrations/legrand.markdown
index 4676b3c62ef..a2d56087012 100644
--- a/source/_integrations/legrand.markdown
+++ b/source/_integrations/legrand.markdown
@@ -8,7 +8,7 @@ ha_category:
   - Environment
   - Hub
   - Light
-  - Media Source
+  - Media source
   - Sensor
   - Switch
   - Weather
diff --git a/source/_integrations/leviton_z_wave.markdown b/source/_integrations/leviton_z_wave.markdown
index 9089eae67a7..f166b500e8f 100644
--- a/source/_integrations/leviton_z_wave.markdown
+++ b/source/_integrations/leviton_z_wave.markdown
@@ -7,7 +7,7 @@ ha_iot_class: Local Push
 ha_codeowners:
   - '@home-assistant/z-wave'
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Climate
   - Cover
diff --git a/source/_integrations/lg_netcast.markdown b/source/_integrations/lg_netcast.markdown
index ecbf7264662..bf1dfe8f381 100644
--- a/source/_integrations/lg_netcast.markdown
+++ b/source/_integrations/lg_netcast.markdown
@@ -2,7 +2,7 @@
 title: LG Netcast
 description: Instructions on how to integrate a LG TV (Netcast 3.0 & 4.0) within Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Polling
 ha_release: '0.20'
 ha_domain: lg_netcast
diff --git a/source/_integrations/lg_soundbar.markdown b/source/_integrations/lg_soundbar.markdown
index 79477b0bf88..c19b9a46cb4 100644
--- a/source/_integrations/lg_soundbar.markdown
+++ b/source/_integrations/lg_soundbar.markdown
@@ -2,7 +2,7 @@
 title: LG Soundbars
 description: Instructions on how to integrate LG Soundbars into Home Assistant.
 ha_category:
-  - Media Player
+  - Media player
 ha_iot_class: Local Polling
 ha_release: 0.81
 ha_domain: lg_soundbar
diff --git a/source/_integrations/life360.markdown b/source/_integrations/life360.markdown
index f7f5c29e309..04fdab8a16e 100644
--- a/source/_integrations/life360.markdown
+++ b/source/_integrations/life360.markdown
@@ -4,7 +4,7 @@ description: Instructions how to use Life360 to track devices in Home Assistant.
 ha_release: 0.95
 ha_config_flow: true
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_iot_class: Cloud Polling
 ha_codeowners:
   - '@pnbruckner'
diff --git a/source/_integrations/light.template.markdown b/source/_integrations/light.template.markdown
index bdc4014e779..1ef91fcbdf5 100644
--- a/source/_integrations/light.template.markdown
+++ b/source/_integrations/light.template.markdown
@@ -193,7 +193,7 @@ In this section you will find some real-life examples of how to use this light.
 This example shows a light that is actually a home theater's volume. This
 integration gives you the flexibility to provide whatever you'd like to send as
 the payload to the consumer including any scale conversions you may need to
-make; the [Media Player integration](/integrations/media_player/) needs a floating
+make; the [media player integration](/integrations/media_player/) needs a floating
 point percentage value from `0.0` to `1.0`.
 
 {% raw %}
diff --git a/source/_integrations/linksys_smart.markdown b/source/_integrations/linksys_smart.markdown
index e2795a7fb04..465069da04f 100644
--- a/source/_integrations/linksys_smart.markdown
+++ b/source/_integrations/linksys_smart.markdown
@@ -2,7 +2,7 @@
 title: Linksys Smart Wi-Fi
 description: Instructions on how to integrate Linksys Smart Wi-Fi Router into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_iot_class: Local Polling
 ha_release: 0.48
 ha_domain: linksys_smart
diff --git a/source/_integrations/linode.markdown b/source/_integrations/linode.markdown
index 8e629711c05..0ff266fe5bc 100644
--- a/source/_integrations/linode.markdown
+++ b/source/_integrations/linode.markdown
@@ -2,9 +2,9 @@
 title: Linode
 description: Instructions on how to set up Linode within Home Assistant.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Switch
-  - System Monitor
+  - System monitor
 ha_release: 0.57
 ha_iot_class: Cloud Polling
 ha_domain: linode
@@ -18,7 +18,7 @@ The `linode` integration allows you to access the information about your [Linode
 
 There is currently support for the following device types within Home Assistant:
 
-- [Binary Sensor](#binary-sensor)
+- [Binary sensor](#binary-sensor)
 - [Switch](#switch)
 
 ## Setup
diff --git a/source/_integrations/linux_battery.markdown b/source/_integrations/linux_battery.markdown
index d344206c792..a14d1133f54 100644
--- a/source/_integrations/linux_battery.markdown
+++ b/source/_integrations/linux_battery.markdown
@@ -2,7 +2,7 @@
 title: Linux Battery
 description: Instructions on how to integrate Linux Battery information into Home Assistant.
 ha_category:
-  - System Monitor
+  - System monitor
 ha_release: 0.28
 ha_iot_class: Local Polling
 ha_codeowners:
diff --git a/source/_integrations/livisi.markdown b/source/_integrations/livisi.markdown
index cd7cff330bd..6ec35438dd4 100644
--- a/source/_integrations/livisi.markdown
+++ b/source/_integrations/livisi.markdown
@@ -2,7 +2,7 @@
 title: LIVISI Smart Home
 description: Access and control your LIVISI Smart Home Controller (SHC) and its connected RWE/innogy devices.
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Climate
   - Switch
 ha_iot_class: Local Polling
diff --git a/source/_integrations/locative.md b/source/_integrations/locative.md
index f68023d902f..3f28d27707d 100644
--- a/source/_integrations/locative.md
+++ b/source/_integrations/locative.md
@@ -2,7 +2,7 @@
 title: "Locative"
 description: "Instructions on how to use Locative to track devices in Home Assistant."
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_release: 0.86
 ha_iot_class: Cloud Push
 ha_domain: locative
diff --git a/source/_integrations/lookin.markdown b/source/_integrations/lookin.markdown
index 5d222568e1e..935c0bbf21c 100644
--- a/source/_integrations/lookin.markdown
+++ b/source/_integrations/lookin.markdown
@@ -4,7 +4,7 @@ description: Instructions on how to integrate LOOKin devices into Home Assistant
 ha_category:
   - Climate
   - Light
-  - Media Player
+  - Media player
   - Sensor
 ha_release: 2021.11
 ha_iot_class: Local Push
diff --git a/source/_integrations/luci.markdown b/source/_integrations/luci.markdown
index d90afe8498c..2de65aa84f1 100644
--- a/source/_integrations/luci.markdown
+++ b/source/_integrations/luci.markdown
@@ -2,7 +2,7 @@
 title: OpenWrt (luci)
 description: Instructions on how to integrate OpenWrt routers into Home Assistant.
 ha_category:
-  - Presence Detection
+  - Presence detection
 ha_iot_class: Local Polling
 ha_release: pre 0.7
 ha_codeowners:
diff --git a/source/_integrations/lupusec.markdown b/source/_integrations/lupusec.markdown
index 66a76b57210..aaa54215431 100644
--- a/source/_integrations/lupusec.markdown
+++ b/source/_integrations/lupusec.markdown
@@ -3,7 +3,7 @@ title: Lupus Electronics LUPUSEC
 description: Instructions on integrating Lupusec home security with Home Assistant.
 ha_category:
   - Alarm
-  - Binary Sensor
+  - Binary sensor
   - Hub
   - Switch
 ha_release: 0.83
@@ -26,8 +26,8 @@ Supported units:
 
 The following devices are supported by the underlying `lupupy` Python library and integrated into Home Assistant.
 
-- **Alarm Control Panel**: Displays the alarm status and controls arming, disarming and home modus.
-- **Binary Sensor**: Displays the status of binary sensors. Currently only Door and window sensors are supported.
+- **Alarm control panel**: Displays the alarm status and controls arming, disarming and home modus.
+- **Binary sensor**: Displays the status of binary sensors. Currently only door and window sensors are supported.
 - **Switch**: Turn off and on your Lupus power switches.
 
 ## Configuration
diff --git a/source/_integrations/lutron_caseta.markdown b/source/_integrations/lutron_caseta.markdown
index 5e23df3a031..edd51b03d78 100644
--- a/source/_integrations/lutron_caseta.markdown
+++ b/source/_integrations/lutron_caseta.markdown
@@ -3,7 +3,7 @@ title: Lutron Caséta
 description: Instructions on how to use Lutron Caseta devices with Home Assistant.
 featured: true
 ha_category:
-  - Binary Sensor
+  - Binary sensor
   - Button
   - Cover
   - Fan
@@ -179,7 +179,7 @@ For more information on working with buttons in Home Assistant, see the [Buttons
 
 Pico and Shade remotes are supported on the Smart Bridge (L-BDG2-WH), Smart Bridge PRO (L-BDGPRO2-WH), and RA2 Select (RR-SEL-REP2-BL) models.
 
-Device Triggers are implemented for `press` and `release` of each button on the remotes via watching for `lutron_caseta_button_event` events in the format:
+Device triggers are implemented for `press` and `release` of each button on the remotes via watching for `lutron_caseta_button_event` events in the format:
 
 {% raw %}