Add ignore option to zwave customize configuration (#1238)

PR for home-assistant/home-assistant#3865
This commit is contained in:
Lukas 2016-10-14 22:44:55 +02:00 committed by Fabian Affolter
parent 5ebacef2f0
commit 73f2e229b0

View File

@ -75,7 +75,8 @@ Configuration variables:
- **autoheal** (*Optional*): Allows disabling auto Z-Wave heal at midnight. Defaults to True.
- **polling_interval** (*Optional*): The time period in milliseconds between polls of a nodes value. Be careful about using polling values below 30000 (30 seconds) as polling can flood the zwave network and cause problems.
- **customize** (*Optional*): This attribute contains node-specific override values:
- **polling_intensity** (*Optional*): Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2-every other time, etc). If not specified then your device will not be polled.
- **polling_intensity** (*Optional*): Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2=every other time, etc). If not specified then your device will not be polled.
- **ignored** (*Optional*): Ignore this entitiy completely. It won't be shown in the Web Interface and no events are generated for it.
To find the path of your Z-Wave USB stick or module, run: