diff --git a/source/_components/sensor.nut.markdown b/source/_components/sensor.nut.markdown
index cae118607b4..278d1a7673e 100644
--- a/source/_components/sensor.nut.markdown
+++ b/source/_components/sensor.nut.markdown
@@ -65,46 +65,51 @@ sensor:
     type: list
 {% endconfiguration %}
 
-### {% linkable_title Example  %}
+### {% linkable_title Example %}
 
 Given the following example output from NUT (your variables may differ):
 
 ```yaml
-'ups.timer.reboot': '0'
-'battery.voltage': '27.0'
-'ups.firmware.aux': 'L3 -P '
-'ups.mfr': 'American Power Conversion'
-'battery.runtime.low': '120'
-'ups.delay.shutdown': '20'
-'ups.load': '19'
-'ups.realpower.nominal': '600'
-'battery.charge.warning': '50'
-'battery.charge.low': '10'
-'ups.vendorid': '051d'
-'ups.timer.shutdown': '-1'
-'ups.test.result': 'No test initiated'
-'ups.firmware': '868.L3 -P.D'
-'battery.mfr.date': '2015/05/08'
-'ups.serial': '3B1519X19994  '
-'ups.productid': '0002'
-'battery.runtime': '2552'
-'battery.date': '2001/09/25'
-'battery.voltage.nominal': '24.0'
-'battery.type': 'PbAc'
-'ups.mfr.date': '2015/05/08'
-'ups.status': 'OL'
-'ups.model': 'Back-UPS RS1000G'
-'ups.beeper.status': 'disabled'
-'battery.charge': '100'
-'input.sensitivity': 'medium'
-'input.transfer.low': '88'
-'input.transfer.high': '147'
-'input.voltage': '121.0'
-'input.voltage.nominal': '120'
-'input.transfer.reason': 'input voltage out of range'
+$ upsc ups_name@192.168.11.5
+ups.timer.reboot: 0
+battery.voltage: 27.0
+ups.firmware.aux: L3 -P
+ups.mfr: American Power Conversion
+battery.runtime.low: 120
+ups.delay.shutdown: 20
+ups.load: 19
+ups.realpower.nominal: 600
+battery.charge.warning: 50
+battery.charge.low: 10
+ups.vendorid: 051d
+ups.timer.shutdown: -1
+ups.test.result: No test initiated
+ups.firmware: 868.L3 -P.D
+battery.mfr.date: 2015/05/08
+ups.serial: 3B1519X19994
+ups.productid: 0002
+battery.runtime: 2552
+battery.date: 2001/09/25
+battery.voltage.nominal: 24.0
+battery.type: PbAc
+ups.mfr.date: 2015/05/08
+ups.status: OL
+ups.model: Back-UPS RS1000G
+ups.beeper.status: disabled
+battery.charge: 100
+input.sensitivity: medium
+input.transfer.low: 88
+input.transfer.high: 147
+input.voltage: 121.0
+input.voltage.nominal: 120
+input.transfer.reason: input voltage out of range
+output.current: 1.10
+output.frequency: 60.20
+output.voltage: 121.50
+output.voltage.nominal: 120
 ```
 
-Use the values from the left hand column. Support is included for most values with 'ups', 'battery', and 'input' prefixes.
+Use the values from the left hand column. Support is included for most values with 'ups', 'battery', 'input' and 'output' prefixes.
 
 ```yaml
 sensor: