UniFi device tracker part of config entry (#9847)

* Change

* Additional changes

* Declare what host and site are required for

* Clarify that old device tracker configuration will still be imported and set up

source/_components/unifi.markdown

@@ -8,6 +8,7 @@ ha_category:
   - Switch
 ha_release: 0.81
 ha_iot_class: Local Polling
+ha_qa_scale: platinum
 redirect_from:
   - /components/device_tracker.unifi/
   - /components/switch.unifi/
@@ -20,74 +21,38 @@ There is currently support for the following device types within Home Assistant:
 - [Presence Detection](#presence-detection)
 - [Switch](#switch)
 
-Currently this implementation only exposes POE control for networked devices. Device tracker implementation is not using the same code base.
-
 ## Configuration
 
-Home Assistant offers UniFi integration through **Configuration** -> **Integrations** -> **UniFi Controller**.
+Home Assistant offers UniFi integration through **Configuration** -> **Integrations** -> **UniFi Controller**. For legacy support old device_tracker configurations are imported and set up as new integrations.
 
-Enter `host address`, `user name` and `password` and then continue to select which `site` you want to connect to Home Assistant. The user must have administrator privileges.
+Enter `host address`, `user name` and `password` and then continue to select which `site` you want to connect to Home Assistant. The user needs administrator privileges in order to control POE switches.
 
-## Debugging integration
+### Extra configuration for device tracker
 
-If you have problems with UniFi or the integration you can add debug prints to the log.
+You can augment the behavior of UniFi device tracker by adding
-
-```yaml
-logger:
-  default: info
-  logs:
-    aiounifi: debug
-    homeassistant.components.unifi: debug
-    homeassistant.components.switch.unifi: debug
-```
-
-## Presence detection
-
-This platform allows you to detect presence by looking at devices connected to a [Ubiquiti](http://ubnt.com/) [Unifi](https://www.ubnt.com/enterprise/#unifi) controller.
-
-To use this device tracker in your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry
-device_tracker:
+unifi:
-  - platform: unifi
+  controllers:
-    host: unifi
+    - host: unifi
-    username: username
+      site: My site
-    password: password
+      ssid_filter:
-    ssid_filter:
+        - 'HomeSSID'
-      - 'HomeSSID'
+          'IoTSSID'
-      - 'IoTSSID'
 ```
 
 {% configuration %}
-username:
-  description: A user on the controller
-  type: string
-  required: true
-password:
-  description: The password for the account
-  type: string
-  required: true
 host:
-  description: The hostname or IP address of your controller
+  description: Same address as relevant config entry, needed to identify config entry
-  default: localhost
   type: string
-  required: false
+  required: true
-port:
+  default: None
-  description: The port of your controller's web interface
+site:
-  default: 8443
+  description: Same site as relevant config entry, needed to identify config entry
-  type: integer
-  required: false
-site_id:
-  description: For multisite installations, you can specify `site_id` to specify which is used
   type: string
-  required: false
+  required: true
-  default: default
+  default: None
-verify_ssl:
-  description: Whether to do strict validation on SSL certificates of the Unifi controller. This can be true/false or the path to a locally trusted certificate to use for verification (i.e. "/path/to/custom_cert.pm")
-  type: boolean or filename
-  required: false
-  default: true
 detection_time:
   description: How long since the last seen time before the device is marked away, specified in seconds.
   type: integer
@@ -98,103 +63,46 @@ ssid_filter:
   type: list of strings
   required: false
   default: None
-monitored_conditions:
-  description: A list of extra attributes to pull from the Unifi controller.
-  type: list
-  required: false
-  default: None
-
 {% endconfiguration %}
 
-See the [device tracker integration page](/components/device_tracker/) for instructions how to configure the people to be tracked.
-
 ### Configuring Users
 
-The Unifi controller allows you to create multiple users on it besides the main administrator. It is recommended that you create a limited user that has `read-only` permissions for the Unifi device tracker.
+The UniFi controller allows you to create multiple users on it besides the main administrator. If all you want to use is the device tracker then it is recommended that you create a limited user that has `read-only` permissions for the Unifi device tracker. If you want POE control as well you would need to have 'admin' permissions.
 
 ### Conflicts with MQTT
 
-The Unifi controller can either be a dedicated hardware device (Unifi's cloud key), or as software any Linux system. If you run the Unifi controller on the same operating system as Home Assistant there may be conflicts in ports if you have the MQTT integration as well.
+The Unifi controller can either be a dedicated hardware device (UniFi's cloud key), or as software any Linux system. If you run the Unifi controller on the same operating system as Home Assistant there may be conflicts in ports if you have the MQTT integration as well.
 
 It is recommended that you run the Unifi controller in a dedicated virtual machine to avoid that situation.
 
-### Correctly specifying the Site ID
+## Presence detection
 
-For environments where there are multiple sites setup on the controller, or the default site is not being used you can use the `site_id` parameter to specify which site you would like to target.
+This platform allows you to detect presence by looking at devices connected to a [Ubiquiti](http://ubnt.com/) [UniFi](https://www.ubnt.com/enterprise/#unifi) controller.
-
-Please note that the value that is to be specificed here is not the name of the site as you would see it in controller interface, but a site ID value assigned from the software itself.
-
-To obtain this value for your configuration file, you can take it from the URL of your browser when on the controller webpage.
-
-For example, this is what would be seen in the URL bar when inside the dashboard page of a site:
-
-`https://127.0.0.1:8443/manage/s/ceb1m27d/dashboard`
-
-And your `site_id` value would be `ceb1m27d`.
 
 ### Troubleshooting and Time Synchronization
 
-Presence detection depends on accurate time configuration between Home Assistant and the Unifi controller.
+Presence detection depends on accurate time configuration between Home Assistant and the UniFi controller.
 
-If Home Assistant and the Unifi controller are running on separate machines or VMs ensure that all clocks are synchronized. Failing to have synchronized clocks will lead to Home Assistant failing to mark a device as home.
+If Home Assistant and the UniFi controller are running on separate machines or VMs ensure that all clocks are synchronized. Failing to have synchronized clocks will lead to Home Assistant failing to mark a device as home.
 
 [Related Issue](https://github.com/home-assistant/home-assistant/issues/10507)
 
-### Monitored Conditions
-
-The Unifi controller returns a number of additional attributes that can be used for tracking devices, including signal strength, rx/tx rates, and which AP it is connected to. The list of possible options may vary depending on your Unifi controller version and if a device is wired or wireless.
-
-Unifi Controller version 5.6.29 has the following options:
-
-- _id
-- _is_guest_by_uap
-- _last_seen_by_uap
-- _uptime_by_uap
-- ap_mac
-- assoc_time
-- authorized
-- bssid
-- bytes-r
-- ccq
-- channel
-- essid
-- first_seen
-- hostname
-- idletime
-- ip
-- is_11r
-- is_guest
-- is_wired
-- last_seen
-- latest_assoc_time
-- mac
-- name
-- noise
-- noted
-- oui
-- powersave_enabled
-- qos_policy_applied
-- radio
-- radio_proto
-- rssi
-- rx_bytes
-- rx_bytes-r
-- rx_packets
-- rx_rate
-- signal
-- site_id
-- tx_bytes
-- tx_bytes-r
-- tx_packets
-- tx_power
-- tx_rate
-- uptime
-- user_id
-- usergroup_id
-- vlan
-
 ## Switch
 
 Switches are network devices that are powered by POE switches from Ubuiqitis UniFi line of networking gear.
 
 Note that POE control actually configures the network port of the switch which the device is connected to.
+
+## Debugging integration
+
+If you have problems with UniFi or the integration you can add debug prints to the log.
+
+```yaml
+logger:
+  default: info
+  logs:
+    aiounifi: debug
+    homeassistant.components.unifi: debug
+    homeassistant.components.device_tracker.unifi: debug
+    homeassistant.components.switch.unifi: debug
+```