Bunch of YAML styling improvements (#16372)

source/_cookbook/automation_first_light.markdown

@@ -24,7 +24,7 @@ automation:
   - alias: Enable First Morning Trigger
     trigger:
       - platform: time
-        at: '05:00:00'
+        at: "05:00:00"
     action:
       service: homeassistant.turn_on
       entity_id: input_boolean.trigger_first_morning
@@ -47,12 +47,12 @@ automation:
     trigger:
       platform: state
       entity_id: binary_sensor.livingroom_motion
-      to: 'on'
+      to: "on"
     # only complete the automation if we're still waiting for the first motion
     condition:
         condition: state
         entity_id: input_boolean.trigger_first_morning
-        state: 'on'
+        state: "on"
 
     action:
       # turn off the "waiting" boolean regardless of whether lights will turn on

source/_cookbook/automation_flashing_lights.markdown

@@ -13,42 +13,42 @@ For flashing regular lights in case an alarm is triggered.
 # AlmSnd1 - switch for a buzzer
 
 automation:
-- alias: 'Alarm_PIR_Room1'
+- alias: "Alarm_PIR_Room1"
   trigger:
     platform: state
     entity_id: binary_sensor.PIR1
-    to: 'on'
+    to: "on"
   condition:
     - condition: state
       entity_id: switch.AlmAct1
-      state: 'on'
+      state: "on"
     - condition: state
       entity_id: script.alarm_room1
-      state: 'off'
+      state: "off"
   action:
     # start alarm on movement if alarm activated
     # and the alarm is not triggered
     service: script.turn_on
     entity_id: script.alarm_room1
 
-- alias: 'flash_room1_start'
+- alias: "flash_room1_start"
   trigger:
     platform: state
     entity_id: switch.AlmSnd1
-    to: 'on'
+    to: "on"
   action:
     service: script.turn_on
     entity_id: script.flash_room1
 
-- alias: 'flash_room1_stop'
+- alias: "flash_room1_stop"
   trigger:
     platform: state
     entity_id: switch.REL1
-    to: 'off'
+    to: "off"
   condition:
     condition: state
     entity_id: switch.AlmSnd1
-    state: 'off'
+    state: "off"
   action:
     service: script.turn_off
     entity_id: script.flash_room1
@@ -68,7 +68,7 @@ script:
       - alias: email_Room1
         service: notify.email
         data:
-          message: 'Movement alarm in Room1'
+          message: "Movement alarm in Room1"
       - delay:
           # time interval for alarm sound and light flashing
           seconds: 60

source/_cookbook/automation_for_rainy_days.markdown

@@ -10,18 +10,18 @@ Turn on a light in the living room when it starts raining, someone is home, and
 
 ```yaml
 automation:
-  - alias: 'Rainy Day'
+  - alias: "Rainy Day"
     trigger:
       - platform: state
         entity_id: sensor.precip_intensity
-        to: 'rain'
+        to: "rain"
     condition:
       - condition: state
         entity_id: all
-        state: 'home'
+        state: "home"
       - condition: time
-        after: '14:00'
+        after: "14:00"
-        before: '23:00'
+        before: "23:00"
     action:
       service: light.turn_on
       entity_id: light.couch_lamp
@@ -30,15 +30,15 @@ automation:
 And then of course turn off the lamp when it stops raining but only if it's within an hour before sunset.
 
 ```yaml
-  - alias: 'Rain is over'
+  - alias: "Rain is over"
     trigger:
       - platform: state
         entity_id: sensor.precip_intensity
-        to: 'None'
+        to: "None"
     condition:
       - condition: sun
-        after: 'sunset'
+        after: "sunset"
-        after_offset: '-01:00:00'
+        after_offset: "-01:00:00"
     action:
       service: light.turn_off
       entity_id: light.couch_lamp

source/_cookbook/automation_sun.markdown

@@ -44,24 +44,24 @@ Send notifications through [PushBullet](/integrations/pushbullet) when the sun s
 
 ```yaml
 automation:
-  - alias: 'Send notification when sun rises'
+  - alias: "Send notification when sun rises"
     trigger:
       platform: sun
       event: sunrise
-      offset: '+00:00:00'
+      offset: "+00:00:00"
     action:
       service: notify.pushbullet
       data:
-        message: 'The sun is up.'
+        message: "The sun is up."
-  - alias: 'Send notification when sun sets'
+  - alias: "Send notification when sun sets"
     trigger:
       platform: sun
       event: sunset
-      offset: '+00:00:00'
+      offset: "+00:00:00"
     action:
       service: notify.pushbullet
       data:
-        message: 'The sun is down.'
+        message: "The sun is down."
 ```
 
 #### Automations for lights and blinds based on solar elevation
@@ -69,7 +69,7 @@ automation:
 Solar elevation automations can cope with offsets from sunset / sunrise as the seasons change better than using a time based offsets.
 
 ```yaml
-- alias: 'Turn a few lights on when the sun gets dim'
+- alias: "Turn a few lights on when the sun gets dim"
   trigger:
     platform: numeric_state
     entity_id: sun.sun
@@ -79,7 +79,7 @@ Solar elevation automations can cope with offsets from sunset / sunrise as the s
     service: scene.turn_on
     entity_id: scene.background_lights
 
-- alias: 'Turn more lights on as the sun gets dimmer'
+- alias: "Turn more lights on as the sun gets dimmer"
   trigger:
     platform: numeric_state
     entity_id: sun.sun
@@ -89,7 +89,7 @@ Solar elevation automations can cope with offsets from sunset / sunrise as the s
     service: scene.turn_on
     entity_id: scene.more_lights
 
-- alias: 'Close blind at dusk'
+- alias: "Close blind at dusk"
   trigger:
     platform: numeric_state
     entity_id: sun.sun

source/_cookbook/automation_telegram_presence_alert.markdown

@@ -23,10 +23,10 @@ automation:
   trigger:
     platform: state
     entity_id: device_tracker.device_name_here
-    from: 'not_home'
+    from: "not_home"
-    to: 'home'
+    to: "home"
   action:
     service: notify.Telegram
     data:
-      message: 'Person is now home'
+      message: "Person is now home"
 ```

source/_cookbook/automation_using_timeinterval_inputboolean.markdown

@@ -17,14 +17,14 @@ input_boolean:
 
 automation:
 # Changes Hue light every two minutes to random color if input boolean is set to on
-- alias: 'Set LivingColors to random color'
+- alias: "Set LivingColors to random color"
   trigger:
     platform: time_pattern
-    minutes: '/2'
+    minutes: "/2"
   condition:
     condition: state
     entity_id: input_boolean.loop_livingcolors
-    state: 'on'
+    state: "on"
   action:
     service: light.turn_on
     entity_id: light.woonkamer_livingcolors

source/_cookbook/dim_and_brighten_lights.markdown

@@ -13,8 +13,8 @@ For the controller this was written for scene ID 13 was sent when the up button
 ```yaml
 automation: 
 
-  - alias: 'Make the lights go bright'
+  - alias: "Make the lights go bright"
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       - platform: event
         event_type: zwave.scene_activated
@@ -29,8 +29,8 @@ automation:
             direction: up
             light: light.YOUR_LIGHT
 
-  - alias: 'Make the lights go dim'
+  - alias: "Make the lights go dim"
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       - platform: event
         event_type: zwave.scene_activated
@@ -45,8 +45,8 @@ automation:
             direction: down
             light: light.YOUR_LIGHT
 
-  - alias: 'Stop the light just there'
+  - alias: "Stop the light just there"
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       - platform: event
         event_type: zwave.scene_activated
@@ -73,28 +73,28 @@ To allow flexibility all four variables are controlled by [Input Number](/integr
 ```yaml
 input_number:
   light_step:
-    name: 'Step the lights this much'
+    name: "Step the lights this much"
     initial: 20
     min: 1
     max: 64
     step: 1
 
   light_minimum:
-    name: 'No dimmer than this'
+    name: "No dimmer than this"
     initial: 5
     min: 1
     max: 255
     step: 1
 
   light_maximum:
-    name: 'No brighter than this'
+    name: "No brighter than this"
     initial: 255
     min: 50
     max: 255
     step: 1
 
   light_delay_ms:
-    name: 'Step the lights this often (ms)'
+    name: "Step the lights this often (ms)"
     initial: 500
     min: 100
     max: 5000

source/_cookbook/dim_lights_when_playing_media.markdown

@@ -45,12 +45,12 @@ automation:
     trigger:
       - platform: state
         entity_id: media_player.htpc
-        from: 'playing'
+        from: "playing"
-        to: 'idle'
+        to: "idle"
     condition:
       - condition: state
         entity_id: sun.sun
-        state: 'below_horizon'
+        state: "below_horizon"
     action:
         service: scene.turn_on
         entity_id: scene.livingroom_normal
@@ -59,12 +59,12 @@ automation:
     trigger:
       - platform: state
         entity_id: media_player.htpc
-        to: 'playing'
+        to: "playing"
-        from: 'idle'
+        from: "idle"
     condition:
       - condition: state
         entity_id: sun.sun
-        state: 'below_horizon'
+        state: "below_horizon"
     action:
         service: scene.turn_on
         entity_id: scene.livingroom_dim

source/_cookbook/foscam_away_mode_PTZ.markdown

@@ -19,7 +19,7 @@ switch:
  switches:
    #Switch for Foscam Motion Detection
    foscam_motion:
-     command_on: 'curl -k --tls-max 1.2 "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&usr=admin&pwd=password"'
+     command_on: "curl -k --tls-max 1.2 "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=1&usr=admin&pwd=password""
      command_off: 'curl -k --tls-max 1.2 "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=setMotionDetectConfig&isEnable=0&usr=admin&pwd=password"'
      command_state: 'curl -k --silent --tls-max 1.2 "https://ipaddress:443/cgi-bin/CGIProxy.fcgi?cmd=getMotionDetectConfig&usr=admin&pwd=password" | grep "isEnable" | cut -b 15'
      value_template: '{% raw %}{{ value == "1" }}{% endraw %}'
@@ -64,14 +64,14 @@ automation:
     trigger:
       platform: state
       entity_id: group.family
-      from: 'home'
+      from: "home"
     action:
       service: script.foscam_on
   - alias: Set Foscam to Home Mode when I arrive Home
     trigger:
       platform: state
       entity_id: group.family
-      to: 'home'
+      to: "home"
     action:
       service: script.foscam_off
 ```

source/_cookbook/notify.mqtt.markdown

@@ -50,7 +50,7 @@ automation:
   trigger:
     platform: state
     entity_id: device_tracker.me
-    to: 'home'
+    to: "home"
   action:
     service: script.notify_mqtt
     data:

source/_cookbook/notify_if__new_ha_release.markdown

@@ -19,12 +19,12 @@ automation:
     trigger:
       - platform: state
         entity_id: binary_sensor.updater
-        from: 'off'
+        from: "off"
-        to: 'on'
+        to: "on"
     action:
       - service: notify.jabber
         data:
-          message: 'There is a new Home Assistant release available.'
+          message: "There is a new Home Assistant release available."
 ```
 
 You can use [templates](/topics/templating/) to include the release number of Home Assistant if you prefer. The following example sends a notification via [Pushbullet](/integrations/pushbullet) with the Home Assistant version in the message.
@@ -32,7 +32,7 @@ You can use [templates](/topics/templating/) to include the release number of Ho
 ```yaml
 notify:
   - platform: pushbullet
-    api_key: 'YOUR_KEY_HERE'
+    api_key: "YOUR_KEY_HERE"
     name: pushbullet
 
 automation:
@@ -40,13 +40,13 @@ automation:
     trigger:
       - platform: state
         entity_id: binary_sensor.updater
-        from: 'off'
+        from: "off"
-        to: 'on'
+        to: "on"
     action:
       - service: notify.pushbullet
         data: 
-          title: 'New Home Assistant Release'
+          title: "New Home Assistant Release"
-          target: 'YOUR_TARGET_HERE' #See Pushbullet integration for usage
+          target: "YOUR_TARGET_HERE" #See Pushbullet integration for usage
           message: "Home Assistant {% raw %} {{ state_attr('binary_sensor.updater', 'newest_version') }} {% endraw %} is now available."
 ```
 

source/_cookbook/perform_actions_based_on_input_select.markdown

@@ -160,5 +160,5 @@ automation:
             {% else %}{% endraw %}
               none{% raw %}
             {% endif %}{% endraw %}
-          media_content_type: 'music'
+          media_content_type: "music"
 ```

source/_cookbook/restart_ha_if_wemo_switch_is_not_detected.markdown

@@ -51,7 +51,7 @@ script:
           minutes: 15
       - service: notify.pushbullet
         data:
-          message: 'WeMo not found, restarting HA'
+          message: "WeMo not found, restarting HA"
       - service: switch.turn_on
         data:
           entity_id: switch.killhass
@@ -61,32 +61,32 @@ automation:
   trigger:
     platform: state
     entity_id: device_tracker.wemo
-    from: 'not_home'
+    from: "not_home"
-    to: 'home'
+    to: "home"
   condition:
     - condition: template
       value_template: {% raw %}'{% if states.switch.wemo %}false{% else %}true{% endif %}'{% endraw %}
     - condition: state
       entity_id: script.restarthawemo
-      state: 'off'
+      state: "off"
   action:
     service: homeassistant.turn_on
     entity_id: script.restarthawemo
-- alias: 'Stop HA'
+- alias: "Stop HA"
   trigger:
     - platform: state
       entity_id: switch.KillHass
-      to: 'on'
+      to: "on"
   action:
     service: homeassistant.stop
-  - alias: 'Stop restarting HA is WeMo is found'
+  - alias: "Stop restarting HA is WeMo is found"
   trigger:
     platform: template
     value_template: {% raw %}'{% if states.switch.wemo %}true{% else %}false{% endif %}'{% endraw %}
   condition:
     condition: state
     entity_id: script.restarthawemo
-    state: 'on'
+    state: "on"
   action:
     service: homeassistant.turn_off
     entity_id: script.restarthawemo

source/_cookbook/send_a_reminder.markdown

@@ -24,9 +24,9 @@ automation:
   - alias: Send message at a given time
     trigger:
       platform: time
-      at: '12:15:00'
+      at: "12:15:00"
     action:
       service: notify.jabber
       data:
-        message: 'Time for lunch'
+        message: "Time for lunch"
 ```

source/_cookbook/sonos_say.markdown

@@ -36,7 +36,7 @@ script:
 We call this now with:
 ```yaml
 automation:
-  - alias: 'test'
+  - alias: "test"
     trigger:
       - platform: state
         entity_id: input_boolean.mytest
@@ -45,8 +45,8 @@ automation:
         data:
           sonos_entity: media_player.office
           volume: 0.5
-          message: 'Your husband coming home!'
+          message: "Your husband coming home!"
-          delay: '00:00:05'
+          delay: "00:00:05"
 ```
 Note that this example uses the `voicerss` text-to-speech platform. There are many platforms that can be used. The one installed by default with Home Assistant is Google TTS. This appears in your `configuration.yaml` file as:
 

source/_cookbook/track_battery_level.markdown

@@ -20,7 +20,7 @@ sensor:
     sensors:
       battery_iphone:
         friendly_name: iPhone Battery
-        unit_of_measurement: '%'
+        unit_of_measurement: "%"
         value_template: >-
             {%- if state_attr('device_tracker.iphone', 'battery') %}
                 {{ state_attr('device_tracker.iphone', 'battery')|round }}
@@ -44,7 +44,7 @@ sensor:
     sensors:
       battery_phone:
         friendly_name: AndroidPhone Battery
-        unit_of_measurement: '%'
+        unit_of_measurement: "%"
         value_template: >-
             {%- if state_attr('device_tracker.xxxxx', 'battery_level') %}
                 {{ state_attr('device_tracker.xxxxx', 'battery_level')|round }}
@@ -71,7 +71,7 @@ sensor:
     state_topic: "owntracks/username/deviceid"
     name: "Battery Tablet"
     unit_of_measurement: "%"
-    value_template: '{{ value_json.batt }}'
+    value_template: "{{ value_json.batt }}"
     device_class: battery
 ```
 
@@ -90,7 +90,7 @@ sensor:
     sensors:
       your_battery_sensor_name:
         value_template: "{{ state_attr('device_tracker.deviceid', 'battery_level') }}"
-        unit_of_measurement: '%'
+        unit_of_measurement: "%"
 ```
 
 {% endraw %}

source/_cookbook/turn_on_light_for_10_minutes_when_motion_detected.markdown

@@ -14,7 +14,7 @@ automation:
   trigger:
     platform: state
     entity_id: sensor.motion_sensor
-    to: 'on'
+    to: "on"
   action:
     service: light.turn_on
     entity_id: light.kitchen_light
@@ -23,7 +23,7 @@ automation:
   trigger:
     platform: state
     entity_id: sensor.motion_sensor
-    to: 'off'
+    to: "off"
     for:
       minutes: 10
   action:
@@ -39,7 +39,7 @@ automation:
   trigger:
   - platform: state
     entity_id: sensor.motion_sensor, binary_sensor.front_door, binary_sensor.doorbell
-    to: 'on'
+    to: "on"
   action:
   - service: light.turn_on
     data:
@@ -65,7 +65,7 @@ automation:
 
 timer:
   hallway:
-    duration: '00:10:00'
+    duration: "00:10:00"
 ```
 
 You can also restrict lights from turning on based on time of day and implement transitions for fading lights on and off.
@@ -75,11 +75,11 @@ You can also restrict lights from turning on based on time of day and implement
   trigger:
     platform: state
     entity_id: binary_sensor.ecolink_pir_motion_sensor_sensor
-    to: 'on'
+    to: "on"
   condition: 
     condition: time
-    after: '07:30'
+    after: "07:30"
-    before: '23:30'
+    before: "23:30"
   action:
     service: homeassistant.turn_on
     entity_id: group.office_lights
@@ -91,7 +91,7 @@ You can also restrict lights from turning on based on time of day and implement
   trigger:
     - platform: state
       entity_id: binary_sensor.ecolink_pir_motion_sensor_sensor
-      to: 'off'
+      to: "off"
       for:
         minutes: 15
   action:

source/_docs/automation/action.markdown

@@ -34,11 +34,11 @@ automation 2:
     # Actions are scripts so can also be a list of actions
     - service: "{{ notification_service }}"
       data:
-        message: Beautiful sunset!
+        message: "Beautiful sunset!"
     - delay: 0:35
     - service: notify.notify
       data:
-        message: Oh wow you really missed something great.
+        message: "Oh wow you really missed something great."
 ```
 
 Conditions can also be part of an action. You can combine multiple service calls and conditions in a single action, and they will be processed in the order you put them in. If the result of a condition is false, the action will stop there so any service calls after that condition will not be executed.
@@ -49,17 +49,20 @@ automation:
   trigger:
     platform: state
     entity_id: sensor.office_occupancy
-    to: 'on'
+    to: "on" 
   action:
     - service: notify.notify
       data:
         message: Testing conditional actions
     - condition: or
       conditions:
-        - condition: template
+        - condition: numeric_state
-          value_template: '{% raw %}{{ state_attr('sun.sun', 'elevation') < 4 }}{% endraw %}'
+          entity_id: sun.sun
-        - condition: template
+          attribute: elevation
-          value_template: '{% raw %}{{ states('sensor.office_illuminance') < 10 }}{% endraw %}'
+          below: 4
-    - service: scene.turn_on
+        - condition: state
+          entity_id: sensor.office_illuminance
+          below: 10
+   - service: scene.turn_on
       entity_id: scene.office_at_evening
 ```

source/_docs/automation/yaml.markdown

@@ -46,7 +46,7 @@ automation my_lights:
       # with a '-'' to enter multiple
       - condition: state
         entity_id: all
-        state: 'home'
+        state: "home"
       - condition: time
         after: '16:00:00'
         before: '23:00:00'

source/_docs/configuration/customizing-devices.markdown

@@ -108,7 +108,7 @@ homeassistant:
     light:
       icon: mdi:home
     automation:
-      initial_state: 'on'
+      initial_state: "on"
   # Customize entities matching a pattern
   customize_glob:
     "light.kitchen_*":

source/_docs/scripts.markdown

@@ -18,7 +18,7 @@ script:
           entity_id: light.ceiling
       - service: notify.notify
         data:
-          message: 'Turned on the ceiling light!'
+          message: "Turned on the ceiling light!"
 ```
 
 - [Call a Service](#call-a-service)
@@ -68,7 +68,9 @@ The variables command allows you to set/override variables that will be accessib
 
 ```yaml
 - variables:
-    entities: light.kitchen, light.living_room
+    entities: 
+      - light.kitchen
+      - light.living_room
     brightness: 100
 - alias: Control lights
   service: light.turn_on
@@ -87,7 +89,7 @@ While executing a script you can add a condition to stop further execution. When
 # If paulus is home, continue to execute the script below these lines
 - condition: state
   entity_id: device_tracker.paulus
-  state: 'home'
+  state: "home"
 ```
 
 ## Delay
@@ -95,6 +97,7 @@ While executing a script you can add a condition to stop further execution. When
 Delays are useful for temporarily suspending your script and start it at a later moment. We support different syntaxes for a delay as shown below.
 
 {% raw %}
+
 ```yaml
 # Seconds
 # Waits 5 seconds
@@ -120,15 +123,18 @@ Delays are useful for temporarily suspending your script and start it at a later
 - delay:
     minutes: 1
 ```
+
 {% endraw %}
 
 All forms accept templates.
 
 {% raw %}
+
 ```yaml
 # Waits however many minutes input_number.minute_delay is set to
 - delay: "{{ states('input_number.minute_delay') | multiply(60) | int }}"
 ```
+
 {% endraw %}
 
 ## Wait
@@ -145,15 +151,18 @@ The template is re-evaluated whenever an entity ID that it references changes st
 
 {% raw %}
 ```yaml
+
 # Wait until media player have stop the playing
 - wait_template: "{{ is_state('media_player.floor', 'stop') }}"
 ```
+
 {% endraw %}
 
 ### Wait for Trigger
 
 This action can use the same triggers that are available in an automation's `trigger` section. See [Automation Trigger](/docs/automation/trigger). The script will continue whenever any of the triggers fires.
 {% raw %}
+
 ```yaml
 # Wait for a custom event or light to turn on and stay on for 10 sec
 - wait_for_trigger:
@@ -164,6 +173,7 @@ This action can use the same triggers that are available in an automation's `tri
       to: 'on'
       for: 10
 ```
+
 {% endraw %}
 
 ### Wait Timeout
@@ -171,17 +181,20 @@ This action can use the same triggers that are available in an automation's `tri
 With both types of waits it is possible to set a timeout after which the script will continue its execution if the condition/event is not satisfied. Timeout has the same syntax as `delay`, and like `delay`, also accepts templates.
 
 {% raw %}
+
 ```yaml
 # Wait for sensor to change to 'on' up to 1 minute before continuing to execute.
 - wait_template: "{{ is_state('binary_sensor.entrance', 'on') }}"
   timeout: '00:01:00'
 ```
+
 {% endraw %}
 
 You can also get the script to abort after the timeout by using optional `continue_on_timeout: false`.
 
 {% raw %}
 ```yaml
+
 # Wait for IFTTT event or abort after specified timeout.
 - wait_for_trigger:
     - platform: event
@@ -192,6 +205,7 @@ You can also get the script to abort after the timeout by using optional `contin
     minutes: "{{ timeout_minutes }}"
   continue_on_timeout: false
 ```
+
 {% endraw %}
 
 Without `continue_on_timeout: false` the script will always continue since the default for `continue_on_timeout` is `true`.
@@ -209,14 +223,13 @@ Variable | Description
 This can be used to take different actions based on whether or not the condition was met, or to use more than one wait sequentially while implementing a single timeout overall.
 
 {% raw %}
+
 ```yaml
 # Take different actions depending on if condition was met.
 - wait_template: "{{ is_state('binary_sensor.door', 'on') }}"
   timeout: 10
 - choose:
-    - conditions:
+    - conditions: "{{ not wait.completed }}"
-        - condition: template
-          value_template: "{{ not wait.completed }}"
       sequence:
         - service: script.door_did_not_open
   default:
@@ -234,7 +247,7 @@ This can be used to take different actions based on whether or not the condition
 - wait_for_trigger:
     - platform: state
       entity_id: binary_sensor.door_2
-      to: 'on'
+      to: "on"
       for: 2
   timeout: "{{ wait.remaining }}"
   continue_on_timeout: false
@@ -260,35 +273,36 @@ You can also use event_data to fire an event with custom data. This could be use
 an event trigger.
 
 {% raw %}
+
 ```yaml
 - event: MY_EVENT
   event_data:
     name: myEvent
     customData: "{{ myCustomVariable }}"
 ```
+
 {% endraw %}
 
 ### Raise and Consume Custom Events
 
 The following automation shows how to raise a custom event called `event_light_state_changed` with `entity_id` as the event data. The action part could be inside a script or an automation.
 
-{% raw %}
 ```yaml
 - alias: Fire Event
   trigger:
     - platform: state
       entity_id: switch.kitchen
-      to: 'on'
+      to: "on"
   action:
     - event: event_light_state_changed
       event_data:
-        state: 'on'
+        state: "on"
 ```
-{% endraw %}
 
 The following automation shows how to capture the custom event `event_light_state_changed`, and retrieve corresponding `entity_id` that was passed as the event data.
 
 {% raw %}
+
 ```yaml
 - alias: Capture Event
   trigger:
@@ -299,6 +313,7 @@ The following automation shows how to capture the custom event `event_light_stat
       data:
         message: "kitchen light is turned {{ trigger.event.data.state }}"
 ```
+
 {% endraw %}
 
 ## Repeat a Group of Actions
@@ -312,6 +327,7 @@ This form accepts a count value. The value may be specified by a template, in wh
 the template is rendered when the repeat step is reached.
 
 {% raw %}
+
 ```yaml
 script:
   flash_light:
@@ -334,6 +350,7 @@ script:
           light: hallway
           count: 3
 ```
+
 {% endraw %}
 
 ### While Loop
@@ -353,7 +370,7 @@ script:
           while:
             - condition: state
               entity_id: input_boolean.do_something
-              state: 'on'
+              state: "on"
             # Don't do it too many times
             - condition: template
               value_template: "{{ repeat.index <= 20 }}"
@@ -393,7 +410,7 @@ automation:
     condition:
       - condition: state
         entity_id: binary_sensor.something
-        state: 'off'
+        state: "off"
     mode: single
     action:
       - alias: Repeat the sequence UNTIL the conditions are true
@@ -408,7 +425,7 @@ automation:
             # Did it work?
             - condition: state
               entity_id: binary_sensor.something
-              state: 'on'
+              state: "on"
 ```
 
 {% endraw %}

source/_docs/scripts/conditions.markdown

@@ -17,7 +17,7 @@ condition:
   conditions:
     - condition: state
       entity_id: 'device_tracker.paulus'
-      state: 'home'
+      state: "home"
     - condition: numeric_state
       entity_id: 'sensor.temperature'
       below: 20
@@ -31,7 +31,7 @@ The following configuration works the same as the one listed above:
 condition:
   - condition: state
     entity_id: 'device_tracker.paulus'
-    state: 'home'
+    state: "home"
   - condition: numeric_state
     entity_id: 'sensor.temperature'
     below: 20
@@ -49,7 +49,7 @@ condition:
   conditions:
     - condition: state
       entity_id: 'device_tracker.paulus'
-      state: 'home'
+      state: "home"
     - condition: numeric_state
       entity_id: 'sensor.temperature'
       below: 20
@@ -66,12 +66,12 @@ condition:
   conditions:
     - condition: state
       entity_id: 'device_tracker.paulus'
-      state: 'home'
+      state: "home"
     - condition: or
       conditions:
         - condition: state
           entity_id: sensor.weather_precip
-          state: 'rain'
+          state: "rain"
         - condition: numeric_state
           entity_id: 'sensor.temperature'
           below: 20
@@ -87,7 +87,7 @@ condition:
   conditions:
     - condition: state
       entity_id: device_tracker.paulus
-      state: 'home'
+      state: "home"
     - condition: state
       entity_id: alarm_control_panel.home_alarm
       state: disarmed
@@ -167,7 +167,7 @@ Tests if an entity is a specified state.
 condition:
   condition: state
   entity_id: device_tracker.paulus
-  state: 'not_home'
+  state: "not_home"
   # optional: trigger only if state was this for last X time.
   for:
     hours: 1
@@ -184,7 +184,7 @@ condition:
   entity_id:
     - light.kitchen
     - light.living_room
-  state: 'on'
+  state: "on"
 ```
 
 Testing if an entity is matching a set of possible conditions;
@@ -245,14 +245,14 @@ The sun state can be used to test if the sun has set or risen.
 condition:
   condition: state  # 'day' condition: from sunrise until sunset
   entity_id: sun.sun
-  state: 'above_horizon'
+  state: "above_horizon"
 ```
 
 ```yaml
 condition:
   condition: state  # from sunset until sunrise
   entity_id: sun.sun
-  state: 'below_horizon'
+  state: "below_horizon"
 ```
 
 ### Sun elevation condition
@@ -532,13 +532,13 @@ condition:
     below: 1
   - condition: state
     entity_id: light.living_room
-    state: 'off'
+    state: "off"
   - condition: time
     before: '23:00:00'
     after: '14:00:00'
   - condition: state
     entity_id: script.light_turned_off_5min
-    state: 'off'
+    state: "off"
 ```
 
 {% endraw %}

source/_integrations/alarm_control_panel.template.markdown

@@ -47,7 +47,7 @@ alarm_control_panel:
         disarm:
           - condition: state
             entity_id: device_tracker.paulus
-            state: 'home'
+            state: "home"
           - service: alarm_control_panel.alarm_arm_home
             data:
               entity_id: alarm_control_panel.real_alarm

source/_integrations/alert.markdown

@@ -38,7 +38,7 @@ alert:
     name: Garage is open
     done_message: Garage is closed
     entity_id: input_boolean.garage_door
-    state: 'on'
+    state: "on"
     repeat: 30
     can_acknowledge: true
     skip_first: true
@@ -137,7 +137,7 @@ alert:
   freshwater_temp_alert:
     name: "Warning: I have detected a problem with the freshwater tank temperature"
     entity_id: binary_sensor.freshwater_temperature_status
-    state: 'on'
+    state: "on"
     repeat: 5
     can_acknowledge: true
     skip_first: false
@@ -194,7 +194,7 @@ alert:
   garage_door:
     name: Garage is open
     entity_id: input_boolean.garage_door
-    state: 'on'   # Optional, 'on' is the default value
+    state: "on"   # Optional, 'on' is the default value
     repeat:
       - 15
       - 30
@@ -228,7 +228,7 @@ alert:
   office_plant:
     name: Plant in office needs help
     entity_id: plant.plant_office
-    state: 'problem'
+    state: "problem"
     repeat: 30
     can_acknowledge: true
     skip_first: true
@@ -254,7 +254,7 @@ alert:
   garage_door:
     name: Garage is open
     entity_id: input_boolean.garage_door
-    state: 'on'   # Optional, 'on' is the default value
+    state: "on"   # Optional, 'on' is the default value
     repeat:
       - 15
       - 30

source/_integrations/arlo.markdown

@@ -54,7 +54,7 @@ The Arlo integration also provides a camera service to enable/disable the motion
 ```yaml
 #automation.yaml
 - alias: Enable Arlo upon HA start'
-  initial_state: 'on'
+  initial_state: "on"
   trigger:
     platform: homeassistant
     event: start

source/_integrations/bayesian.markdown

@@ -28,7 +28,7 @@ binary_sensor:
         prob_given_true: 0.6
         prob_given_false: 0.2
         platform: 'state'
-        to_state: 'on'
+        to_state: "on"
 ```
 
 {% configuration %}
@@ -99,20 +99,20 @@ binary_sensor:
       entity_id: 'sensor.living_room_motion'
       prob_given_true: 0.4
       prob_given_false: 0.2
-      to_state: 'off'
+      to_state: "off"
     - platform: 'state'
       entity_id: 'sensor.basement_motion'
       prob_given_true: 0.5
       prob_given_false: 0.4
-      to_state: 'off'
+      to_state: "off"
     - platform: 'state'
       entity_id: 'sensor.bedroom_motion'
       prob_given_true: 0.5
-      to_state: 'on'
+      to_state: "on"
     - platform: 'state'
       entity_id: 'sun.sun'
       prob_given_true: 0.7
-      to_state: 'below_horizon'
+      to_state: "below_horizon"
 ```
 
 Next up an example which targets the `numeric_state` observation platform,

source/_integrations/binary_sensor.xiaomi_aqara.markdown

@@ -108,7 +108,7 @@ The requirement is that you have setup the [`xiaomi aqara` integration](/integra
   condition:
     - condition: state
       entity_id: group.family
-      state: 'not_home'
+      state: "not_home"
   action:
     - service: notify.notify_person
       data:

source/_integrations/caldav.markdown

@@ -171,5 +171,5 @@ calendar:
   condition:
   - condition: state
     entity_id: calendar.work_holiday
-    state: 'off'
+    state: "off"
 ```

source/_integrations/deconz.markdown

@@ -186,7 +186,7 @@ Requesting support for additional devices requires the device model (can be acqu
 ```yaml
 automation:
   - alias: 'Toggle lamp from dimmer'
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       platform: event
       event_type: deconz_event
@@ -198,7 +198,7 @@ automation:
       entity_id: light.lamp
 
   - alias: 'Increase brightness of lamp from dimmer'
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       platform: event
       event_type: deconz_event
@@ -214,7 +214,7 @@ automation:
             {{ [bri+30, 249] | min }}
 
   - alias: 'Decrease brightness of lamp from dimmer'
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       platform: event
       event_type: deconz_event
@@ -230,7 +230,7 @@ automation:
             {{ [bri-30, 0] | max }}
 
   - alias: 'Turn lamp on when turning cube clockwise'
-    initial_state: 'on'
+    initial_state: "on"
     trigger:
       platform: event
       event_type: deconz_event

source/_integrations/google_travel_time.markdown

@@ -139,7 +139,7 @@ You can also use the `homeassistant.update_entity` service to update the sensor
 ```yaml
 - id: update_morning_commute_sensor
   alias: "Commute - Update morning commute sensor"
-  initial_state: 'on'
+  initial_state: "on"
   trigger:
     - platform: time_pattern
       minutes: '/2'

source/_integrations/here_travel_time.markdown

@@ -157,7 +157,7 @@ You can also use the `homeassistant.update_entity` service to update the sensor
 automation:
 - id: update_morning_commute_sensor
   alias: "Commute - Update morning commute sensor"
-  initial_state: 'on'
+  initial_state: "on"
   trigger:
     - platform: time_pattern
       minutes: '/2'

source/_integrations/history_stats.markdown

@@ -32,7 +32,7 @@ sensor:
   - platform: history_stats
     name: Lamp ON today
     entity_id: light.my_lamp
-    state: 'on'
+    state: "on"
     type: time
     start: '{{ now().replace(hour=0, minute=0, second=0) }}'
     end: '{{ now() }}'

source/_integrations/input_boolean.markdown

@@ -79,7 +79,7 @@ automation:
   condition:
     condition: state
     entity_id: input_boolean.notify_home
-    state: 'on'
+    state: "on"
   action:
     service: notify.pushbullet
     data:

source/_integrations/insteon.markdown

@@ -129,7 +129,7 @@ automation:
     condition:
       - condition: state
         entity_id: light.some_light
-        state: 'off'
+        state: "off"
     action:
       - service: light.turn_on
         entity_id: light.some_light
@@ -145,7 +145,7 @@ automation:
     condition:
       - condition: state
         entity_id: light.some_light
-        state: 'off'
+        state: "off"
     action:
       - service: light.turn_on
         entity_id: light.some_light
@@ -390,7 +390,7 @@ automation:
     condition:
       - condition: state
         entity_id: light.some_light
-        state: 'off'
+        state: "off"
     action:
       - service: light.turn_on
         entity_id: light.some_light
@@ -406,7 +406,7 @@ automation:
     condition:
       - condition: state
         entity_id: light.some_light
-        state: 'off'
+        state: "off"
     action:
       - service: light.turn_on
         entity_id: light.some_light

source/_integrations/kira.markdown

@@ -204,7 +204,7 @@ Example automation using these IR codes to toggle a Sonoff plug.
 
 ```yaml
 # Example kira_sensor
-- id: '1583339338363'
+- id: "1583339338363"
   alias: Panasonic On
   description: Turn on sonoff s20 relay
   trigger:
@@ -217,8 +217,8 @@ Example automation using these IR codes to toggle a Sonoff plug.
     domain: switch
     entity_id: switch.plug2_relay
     type: turn_on
-- id: '1584035716024'
+- id: "1584035716024"
-  alias: 'Panaxonic Off '
+  alias: "Panaxonic Off "
   description: Turn off sonoff s20 relay
   trigger:
   - entity_id: sensor.kira_wireless

source/_integrations/knx.markdown

@@ -72,7 +72,7 @@ Alternatively, if you want to use the [XKNX](https://xknx.io/) library abstracti
 
 ```yaml
 knx:
-  config_file: '/path/to/xknx.yaml'
+  config_file: "/path/to/xknx.yaml"
 ```
 
 {% configuration %}
@@ -107,9 +107,9 @@ If the auto detection of the KNX/IP device does not work, you can specify IP and
 ```yaml
 knx:
   tunneling:
-    host: '192.168.2.23'
+    host: "192.168.2.23"
     port: 3671
-    local_ip: '192.168.2.109'
+    local_ip: "192.168.2.109"
 ```
 
 {% configuration %}
@@ -132,7 +132,7 @@ Explicit connection to a KNX/IP routing device:
 ```yaml
 knx:
   routing:
-     local_ip: '192.168.2.109'
+     local_ip: "192.168.2.109"
 ```
 
 {% configuration %}
@@ -197,28 +197,28 @@ KNX integration is able to expose entity states or attributes to KNX bus. The in
 # Example configuration.yaml entry
 knx:
   expose:
-    - type: 'temperature'
+    - type: "temperature"
-      entity_id: 'sensor.owm_temperature'
+      entity_id: "sensor.owm_temperature"
-      address: '0/0/2'
+      address: "0/0/2"
-    - type: 'string'
+    - type: "string"
-      address: '0/6/4'
+      address: "0/6/4"
       entity_id: "sensor.owm_weather"
-    - type: 'binary'
+    - type: "binary"
-      entity_id: 'binary_sensor.kitchen_window'
+      entity_id: "binary_sensor.kitchen_window"
-      address: '0/6/5'
+      address: "0/6/5"
-    - type: 'binary'
+    - type: "binary"
-      entity_id: 'light.office'
+      entity_id: "light.office"
-      address: '0/3/0'
+      address: "0/3/0"
       default: false
-    - type: 'percentU8'
+    - type: "percentU8"
-      entity_id: 'light.office'
+      entity_id: "light.office"
-      attribute: 'brightness'
+      attribute: "brightness"
       default: 0
-      address: '0/3/1'
+      address: "0/3/1"
-    - type: 'time'
+    - type: "time"
-      address: '0/0/1'
+      address: "0/0/1"
-    - type: 'datetime'
+    - type: "datetime"
-      address: '0/0/23'
+      address: "0/0/23"
 ```
 
 {% configuration %}
@@ -261,7 +261,7 @@ To use your binary sensors please add the relevant configuration to your top lev
 knx:
   binary_sensor:
     - name: sensor1
-      state_address: '6/0/2'
+      state_address: "6/0/2"
 ```
 
 {% configuration %}
@@ -321,7 +321,7 @@ automation:
     condition: 
       - condition: state
         entity_id: binary_sensor.cover_abstell
-        state: 'on'
+        state: "on"
     action:
       - entity_id: light.hue_color_lamp_1
         service: light.turn_on
@@ -334,7 +334,7 @@ automation:
     condition:
       - condition: state
         entity_id: binary_sensor.cover_abstell
-        state: 'on'
+        state: "on"
     action:
       - entity_id: light.hue_bloom_1
         service: homeassistant.turn_on
@@ -374,12 +374,12 @@ To use your KNX thermostats in your installation, add the following lines to you
 knx:
   climate:
     - name: HASS-Kitchen.Temperature
-      temperature_address: '5/1/1'
+      temperature_address: "5/1/1"
-      setpoint_shift_address: '5/1/2'
+      setpoint_shift_address: "5/1/2"
-      setpoint_shift_state_address: '5/1/3'
+      setpoint_shift_state_address: "5/1/3"
-      target_temperature_state_address: '5/1/4'
+      target_temperature_state_address: "5/1/4"
-      operation_mode_address: '5/1/5'
+      operation_mode_address: "5/1/5"
-      operation_mode_state_address: '5/1/6'
+      operation_mode_state_address: "5/1/6"
 ```
 
 Alternatively, if your device has dedicated binary group addresses for frost/night/comfort mode:
@@ -389,14 +389,14 @@ Alternatively, if your device has dedicated binary group addresses for frost/nig
 knx:
   climate:
     - name: HASS-Kitchen.Temperature
-      temperature_address: '5/1/1'
+      temperature_address: "5/1/1"
-      setpoint_shift_address: '5/1/2'
+      setpoint_shift_address: "5/1/2"
-      setpoint_shift_state_address: '5/1/3'
+      setpoint_shift_state_address: "5/1/3"
-      target_temperature_state_address: '5/1/4'
+      target_temperature_state_address: "5/1/4"
-      operation_mode_frost_protection_address: '5/1/5'
+      operation_mode_frost_protection_address: "5/1/5"
-      operation_mode_night_address: '5/1/6'
+      operation_mode_night_address: "5/1/6"
-      operation_mode_comfort_address: '5/1/7'
+      operation_mode_comfort_address: "5/1/7"
-      operation_mode_state_address: '5/1/8'
+      operation_mode_state_address: "5/1/8"
 ```
 
 If your device doesn't support setpoint_shift calculations (i.e., if you don't provide a `setpoint_shift_address` value) please set the `min_temp` and `max_temp`
@@ -407,14 +407,14 @@ attributes of the climate device to avoid issues with exceeding valid temperatur
 knx:
   climate:
     - name: HASS-Kitchen.Temperature
-      temperature_address: '5/1/2'
+      temperature_address: "5/1/2"
-      target_temperature_address: '5/1/4'
+      target_temperature_address: "5/1/4"
-      target_temperature_state_address: '5/1/1'
+      target_temperature_state_address: "5/1/1"
-      operation_mode_frost_protection_address: '5/1/5'
+      operation_mode_frost_protection_address: "5/1/5"
-      operation_mode_night_address: '5/1/6'
+      operation_mode_night_address: "5/1/6"
-      operation_mode_comfort_address: '5/1/7'
+      operation_mode_comfort_address: "5/1/7"
-      operation_mode_state_address: '5/1/8'
+      operation_mode_state_address: "5/1/8"
-      operation_mode_standby_address: '5/1/9'
+      operation_mode_standby_address: "5/1/9"
       min_temp: 7.0
       max_temp: 32.0
 ```
@@ -431,13 +431,13 @@ Example:
 knx:
   climate:
     - name: HASS-Kitchen.Temperature
-      temperature_address: '5/1/1'
+      temperature_address: "5/1/1"
-      setpoint_shift_address: '5/1/2'
+      setpoint_shift_address: "5/1/2"
-      setpoint_shift_state_address: '5/1/3'
+      setpoint_shift_state_address: "5/1/3"
-      setpoint_shift_mode: 'DPT9002'
+      setpoint_shift_mode: "DPT9002"
-      target_temperature_state_address: '5/1/4'
+      target_temperature_state_address: "5/1/4"
-      operation_mode_address: '5/1/5'
+      operation_mode_address: "5/1/5"
-      operation_mode_state_address: '5/1/6'
+      operation_mode_state_address: "5/1/6"
 ```
 
 `operation_mode_frost_protection_address` / `operation_mode_night_address` / `operation_mode_comfort_address` / `operation_mode_standby_address` are not necessary if `operation_mode_address` is specified.
@@ -601,11 +601,11 @@ To use your KNX covers in your installation, add the following lines to your top
 knx:
   cover:
     - name: "Kitchen.Shutter"
-      move_long_address: '3/0/0'
+      move_long_address: "3/0/0"
-      move_short_address: '3/0/1'
+      move_short_address: "3/0/1"
-      stop_address: '3/0/4'
+      stop_address: "3/0/4"
-      position_address: '3/0/3'
+      position_address: "3/0/3"
-      position_state_address: '3/0/2'
+      position_state_address: "3/0/2"
       travelling_time_down: 51
       travelling_time_up: 61
 ```
@@ -687,8 +687,8 @@ To use your KNX light in your installation, add the following lines to your top
 # Example configuration.yaml entry
 knx:
   light:
-    - name: 'kitchen'
+    - name: "kitchen"
-      address: '1/0/9'
+      address: "1/0/9"
 ```
 
 {% configuration %}
@@ -766,36 +766,36 @@ knx:
   light:
     # dimmable light
     - name: Bedroom-Light-1
-      address: '1/0/9'
+      address: "1/0/9"
-      state_address: '1/1/9'
+      state_address: "1/1/9"
-      brightness_address: '1/2/9'
+      brightness_address: "1/2/9"
-      brightness_state_address: '1/3/9'
+      brightness_state_address: "1/3/9"
     #
     # RGB light
     - name: Bathroom-Light-1
-      address: '1/0/9'
+      address: "1/0/9"
-      state_address: '1/1/9'
+      state_address: "1/1/9"
-      brightness_address: '1/2/9'
+      brightness_address: "1/2/9"
-      brightness_state_address: '1/3/9'
+      brightness_state_address: "1/3/9"
-      color_address: '1/4/9'
+      color_address: "1/4/9"
-      color_state_address: '1/5/9'
+      color_state_address: "1/5/9"
     #
     # tunable white light
     - name: Office-Light-1
-      address: '1/0/21'
+      address: "1/0/21"
-      state_address: '1/1/21'
+      state_address: "1/1/21"
-      brightness_address: '1/2/21'
+      brightness_address: "1/2/21"
-      brightness_state_address: '1/3/21'
+      brightness_state_address: "1/3/21"
-      color_temperature_address: '1/4/21'
+      color_temperature_address: "1/4/21"
-      color_temperature_state_address: '1/5/21'
+      color_temperature_state_address: "1/5/21"
       color_temperature_mode: absolute
       min_kelvin: 2550
       max_kelvin: 6200
     #
     # actuator without dedicated state communication object
     - name: Cellar-Light-1
-      address: '1/0/5'
+      address: "1/0/5"
-      state_address: '1/0/5'
+      state_address: "1/0/5"
 ```
 
 ## Notify
@@ -810,7 +810,7 @@ To use your KNX switch in your installation, add the following lines to your top
 knx:
   notify:
     - name: Alarm
-      address: '5/1/10'
+      address: "5/1/10"
 ```
 
 {% configuration %}
@@ -872,7 +872,7 @@ To use your KNX sensor in your installation, add the following lines to your top
 knx:
   sensor:
     - name: Heating.Valve1
-      state_address: '2/0/0'
+      state_address: "2/0/0"
 ```
 
 In order to actively read the sensor data from the bus all 30 minutes you can add the following lines to your `configuration.yaml`:
@@ -882,7 +882,7 @@ In order to actively read the sensor data from the bus all 30 minutes you can ad
 knx:
   sensor:
     - name: Heating.Valve1
-      state_address: '2/0/0'
+      state_address: "2/0/0"
       sync_state: every 30
 ```
 
@@ -1058,13 +1058,13 @@ always_callback:
 knx:
   sensor:
     - name: Heating.Valve1
-      state_address: '2/0/0'
+      state_address: "2/0/0"
       sync_state: init
-      type: 'percent'
+      type: "percent"
     - name: Kitchen.Temperature
-      state_address: '6/2/1'
+      state_address: "6/2/1"
       sync_state: every 60
-      type: 'temperature'
+      type: "temperature"
 ```
 
 ## Switch
@@ -1079,7 +1079,7 @@ To use your KNX switch in your installation, add the following lines to your top
 knx:
   switch:
     - name: Kitchen.Coffee
-      address: '1/1/6'
+      address: "1/1/6"
 ```
 
 {% configuration %}

source/_integrations/konnected.markdown

@@ -261,19 +261,19 @@ konnected:
       binary_sensors:
         - zone: 1
           type: door
-          name: 'Front Door'
+          name: "Front Door"
         - zone: 2
           type: smoke
-          name: 'Bedroom Smoke Detector'
+          name: "Bedroom Smoke Detector"
           inverse: true
         - zone: 3
           type: motion
-          name: 'Test Motion'
+          name: "Test Motion"
       switches:
         - zone: out
           name: siren
         - zone: 5
-          name: 'Beep Beep'
+          name: "Beep Beep"
           momentary: 65
           pause: 55
           repeat: 4

source/_integrations/lametric.markdown

@@ -115,18 +115,18 @@ To add a notification sound, icon, cycles, or priority override, it has to be do
   trigger:
     platform: state
     entity_id: device_tracker.son_mobile
-    from: 'not_home'
+    from: "not_home"
-    to: 'school'
+    to: "school"
   action:
     service: notify.lametric
     data:
       message: "Son has arrived at school!"
       data:
-        sound: 'notification'
+        sound: "notification"
-        icon: 'i51'
+        icon: "i51"
         cycles: 0
-        priority: 'critical'
+        priority: "critical"
-        icon_type: 'none'
+        icon_type: "none"
 ```
 
 ### Only notify specific device
@@ -140,8 +140,8 @@ If you have more than one La Metric device, you can specify which will receive t
       message: "Son has arrived at school!"
       target: "Office LaMetric"
       data:
-        sound: 'notification'
+        sound: "notification"
-        icon: 'i51'
+        icon: "i51"
  ```
 
  If target is not specified, all LaMetric devices will be notified.

source/_integrations/lcn.markdown

@@ -183,7 +183,7 @@ climates:
       description: "Measurement unit ([VAR_UNIT](#variables-and-units))."
       required: false
       type: string
-      default: 'celsius'
+      default: "celsius"
     min_temp:
       description: "Minimum target temperature."
       required: false
@@ -302,7 +302,7 @@ sensors:
       description: "Measurement unit ([VAR_UNIT](#variables-and-units))."
       required: false
       type: string
-      default: 'native'
+      default: "native"
 
 switches:
   description: List of your switches.

source/_integrations/lifx.markdown

@@ -53,7 +53,7 @@ However, if you want to fully control a light effect, you have to use its dedica
 ```yaml
 script:
   colorloop_start:
-    alias: 'Start colorloop'
+    alias: "Start colorloop"
     sequence:
       - service: lifx.effect_colorloop
         data:

source/_integrations/media_player.markdown

@@ -118,9 +118,9 @@ entity_id: media_player.chromecast
 service: media_player.play_media
 data:
   media_content_type: music
-  media_content_id: 'https://fake-home-assistant.io.stream/aac'
+  media_content_id: "https://fake-home-assistant.io.stream/aac"
   extra:
-    thumb: 'https://brands.home-assistant.io/_/homeassistant/logo.png'
+    thumb: "https://brands.home-assistant.io/_/homeassistant/logo.png"
     title: HomeAssitantRadio
 ```
 

source/_integrations/meteo_france.markdown

@@ -42,8 +42,8 @@ To add Météo-France to your installation, add the following to your `configura
 ```yaml
 # Example configuration.yaml entry for 2 cities
 meteo_france:
-  - city: '76000'
+  - city: "76000"
-  - city: 'Auch'
+  - city: "Auch"
 ```
 
 {% configuration %}

source/_integrations/meteoalarm.markdown

@@ -21,8 +21,8 @@ To enable this binary sensor, add the following lines to your `configuration.yam
 ```yaml
 binary_sensor:
   - platform: meteoalarm
-    country: 'NL'
+    country: "NL"
-    province: 'Groningen'
+    province: "Groningen"
 ```
 
 {% configuration %}
@@ -43,7 +43,7 @@ language:
   description: "The 2 letters of your language, please be aware that this is only possible in the current country. So 'ne' is only possible in Netherlands. Possible options are: bu, bs, ce, da, de, ee, en, es, ga, ca, su, fr, gr, he, hr, ma, is, it, li, la, sr, mk, ma, ne, no, po, pt, ro, cp, sv, sl, eu."
   required: false
   type: string
-  default: 'en'
+  default: "en"
 {% endconfiguration %}
 
 

source/_integrations/microsoft_face.markdown

@@ -67,7 +67,7 @@ via the Frontend, a script, or the REST API.
 ```yaml
 service: microsoft_face.create_group
 data:
-  name: 'Family'
+  name: "Family"
 ```
 
 - *microsoft_face.create_person*
@@ -77,7 +77,7 @@ data:
 service: microsoft_face.create_person
 data:
   group: family
-  name: 'Hans Maier'
+  name: "Hans Maier"
 ```
 
 You need to add an image of a person. You can add multiple images for every
@@ -90,7 +90,7 @@ send a local image to your Azure resource.
 service: microsoft_face.face_person
 data:
   group: family
-  name: 'Hans Maier'
+  name: "Hans Maier"
   camera_entity: camera.door
 ```
 

source/_integrations/miflora.markdown

@@ -57,7 +57,7 @@ To use your Mi Flora plant sensor in your installation, add the following to you
 # Example configuration.yaml entry
 sensor:
   - platform: miflora
-    mac: 'xx:xx:xx:xx:xx:xx'
+    mac: "xx:xx:xx:xx:xx:xx"
     monitored_conditions:
       - moisture
 ```
@@ -122,7 +122,7 @@ A full configuration example could look like the one below:
 # Example configuration.yaml entry
 sensor:
   - platform: miflora
-    mac: 'xx:xx:xx:xx:xx:xx'
+    mac: "xx:xx:xx:xx:xx:xx"
     name: Flower 1
     force_update: true
     median: 3

source/_integrations/minio.markdown

@@ -92,13 +92,13 @@ automation:
     event_data:
       event_type: created
   action:
-    - delay: '00:00:01'
+    - delay: "00:00:01"
     - service: minio.put
       data:
         file_path: "{{ trigger.event.data.path }}"
         bucket: "camera-image-object-detection"
         key: "input/{{ now().year }}/{{ (now().month | string).zfill(2) }}/{{ (now().day | string).zfill(2) }}/{{ trigger.event.data.file }}"
-    - delay: '00:00:01'
+    - delay: "00:00:01"
     - service: shell_command.remove_file
       data:
         file: "{{ trigger.event.data.path }}"

source/_integrations/mitemp_bt.markdown

@@ -49,7 +49,7 @@ To use your Mi Temperature and Humidity sensor in your installation, add the fol
 # Example configuration.yaml entry
 sensor:
   - platform: mitemp_bt
-    mac: 'xx:xx:xx:xx:xx:xx'
+    mac: "xx:xx:xx:xx:xx:xx"
     monitored_conditions:
       - temperature
 ```
@@ -118,7 +118,7 @@ A full configuration example could look like the one below:
 # Example configuration.yaml entry
 sensor:
   - platform: mitemp_bt
-    mac: 'xx:xx:xx:xx:xx:xx'
+    mac: "xx:xx:xx:xx:xx:xx"
     name: Kids Room Temp
     force_update: true
     median: 1

source/_integrations/modem_callerid.markdown

@@ -77,7 +77,7 @@ automation:
     action:
       service: notify.notify
       data:
-        message: 'Call from {{ state_attr('sensor.modem_callerid', 'cid_name') }} at {{ state_attr('sensor.modem_callerid', 'cid_number') }} '
+        message: "Call from {{ state_attr('sensor.modem_callerid', 'cid_name') }} at {{ state_attr('sensor.modem_callerid', 'cid_number') }} "
   - alias: Notify CallerID webui
     trigger:
       platform: state
@@ -87,7 +87,7 @@ automation:
       service: persistent_notification.create
       data:
         title: "Call from"
-        message: '{{ state_attr('sensor.modem_callerid', 'cid_time').strftime("%I:%M %p") }} {{ state_attr('sensor.modem_callerid', 'cid_name') }}  {{ state_attr('sensor.modem_callerid', 'cid_number') }} '
+        message: "{{ state_attr('sensor.modem_callerid', 'cid_time').strftime("%I:%M %p") }} {{ state_attr('sensor.modem_callerid', 'cid_name') }}  {{ state_attr('sensor.modem_callerid', 'cid_number') }} "
   - alias: Say CallerID
     trigger:
       platform: state
@@ -96,7 +96,7 @@ automation:
     action:
       service: tts.google_say
       data:
-        message: 'Call from {{ state_attr('sensor.modem_callerid', 'cid_name') }}'
+        message: "Call from {{ state_attr('sensor.modem_callerid', 'cid_name') }}"
 ```
 
 {% endraw %}

source/_integrations/mvglive.markdown

@@ -74,14 +74,14 @@ sensor:
      - station: Hauptbahnhof
        name: Hbf
        destinations: ['München Flughafen Terminal','Markt Schwaben']
-       products: 'S-Bahn'
+       products: "S-Bahn"
        timeoffset: 2
      - station: Sendlinger Tor
        lines: ['U2','U8']
        number: 5
      - station: Scheidplatz
        products: ['U-Bahn']
-       directions: '1'
+       directions: "1"
 ```
 
 The first sensor will return S-Bahn departures to Munich Airport or Markt Schwaben that are at least 2 minutes away.

source/_integrations/mysensors.markdown

@@ -20,7 +20,7 @@ Integrate your Serial, Ethernet (LAN) or MQTT MySensors Gateway by adding the fo
 # Example configuration.yaml entry
 mysensors:
   gateways:
-    - device: '/dev/ttyUSB0'
+    - device: "/dev/ttyUSB0"
 ```
 
 {% configuration %}
@@ -52,12 +52,12 @@ mysensors:
         description: Set the prefix of the MQTT topic for messages coming from the MySensors gateway in to Home Assistant.
         required: false
         type: string
-        default: ''
+        default: ""
       topic_out_prefix:
         description: Set the prefix of the MQTT topic for messages going from Home Assistant out to the MySensors gateway.
         required: false
         type: string
-        default: ''
+        default: ""
       nodes:
         description: A mapping of node ids to node settings, e.g.,  custom name.
         required: false
@@ -76,7 +76,7 @@ mysensors:
     description: Specifies the MySensors protocol version to use. Supports versions 1.4 to 2.3.
     required: false
     type: string
-    default: '1.4'
+    default: "1.4"
   optimistic:
     description: Enable or disable optimistic mode for actuators (switch/light). Set this to true if no state feedback from actuators is possible. Home Assistant will assume that the command succeeded and change state.
     required: false
@@ -116,28 +116,28 @@ The MQTT gateway requires MySensors version 2.0+ and only the MQTT client gatewa
 # Example configuration.yaml entry
 mysensors:
   gateways:
-    - device: '/dev/ttyUSB0'
+    - device: "/dev/ttyUSB0"
-      persistence_file: 'path/mysensors.json'
+      persistence_file: "path/mysensors.json"
       baud_rate: 38400
       nodes:
         1:
-          name: 'kitchen'
+          name: "kitchen"
         3:
-          name: 'living_room'
+          name: "living_room"
-    - device: '/dev/ttyACM0'
+    - device: "/dev/ttyACM0"
-      persistence_file: 'path/mysensors2.json'
+      persistence_file: "path/mysensors2.json"
       baud_rate: 115200
-    - device: '192.168.1.18'
+    - device: "192.168.1.18"
-      persistence_file: 'path/mysensors3.json'
+      persistence_file: "path/mysensors3.json"
       tcp_port: 5003
     - device: mqtt
-      persistence_file: 'path/mysensors4.json'
+      persistence_file: "path/mysensors4.json"
-      topic_in_prefix: 'mygateway1-out'
+      topic_in_prefix: "mygateway1-out"
-      topic_out_prefix: 'mygateway1-in'
+      topic_out_prefix: "mygateway1-in"
   optimistic: false
   persistence: true
   retain: true
-  version: '2.0'
+  version: "2.0"
 ```
 
 ### Presentation

source/_integrations/nad.markdown

@@ -93,6 +93,6 @@ media_player:
     min_volume: -60
     max_volume: -20
     sources:
-      1: 'Kodi'
+      1: "Kodi"
-      2: 'TV'
+      2: "TV"
 ```

source/_integrations/nederlandse_spoorwegen.markdown

@@ -29,10 +29,10 @@ sensor:
       from: Gn
       to: Mt
       via: Zl
-    - name: 'AlmereBuiten-Duivendrecht-the-08h06m-train'
+    - name: "AlmereBuiten-Duivendrecht-the-08h06m-train"
       from: Almb
       to: Dvd
-      time: '08:06:00'
+      time: "08:06:00"
 ```
 
 {% configuration %}

source/_integrations/ness_alarm.markdown

@@ -55,7 +55,7 @@ port:
 scan_interval:
   description: "Time interval between updates. Supported formats: `scan_interval: 'HH:MM:SS'`, `scan_interval: 'HH:MM'` and Time period dictionary (see example below)."
   required: false
-  default: '00:01:00'
+  default: "00:01:00"
   type: time
 infer_arming_state:
   description: Infer the disarmed arming state only via system status events. This works around a bug with some panels (`<v5.8`) which emit `update.status = []` when they are armed.

source/_integrations/netdata.markdown

@@ -130,15 +130,15 @@ resources:
 # Example configuration.yaml entry
 sensor:
   - platform: netdata
-    host: '192.168.1.2'
+    host: "192.168.1.2"
-    port: '19999'
+    port: "19999"
     name: SomeHostName
     resources: 
       system_load:
         data_group: system.load 
         element: load15
       core0_freq:
-        data_group: 'cpu.cpufreq'
+        data_group: "cpu.cpufreq"
-        element: 'cpu0'
+        element: "cpu0"
         icon: mdi:chip
 ```

source/_integrations/netgear_lte.markdown

@@ -193,11 +193,11 @@ automation:
     action:
       - service: conversation.process
         data:
-          text: '{{ trigger.event.data.message }}'
+          text: "{{ trigger.event.data.message }}"
       - service: netgear_lte.delete_sms
         data:
-          host: '{{ trigger.event.data.host }}'
+          host: "{{ trigger.event.data.host }}"
-          sms_id: '{{ trigger.event.data.sms_id }}'
+          sms_id: "{{ trigger.event.data.sms_id }}"
 ```
 
 {% endraw %}

source/_integrations/nightscout.markdown

@@ -35,16 +35,16 @@ The state is the last reading from Nightscout, and you can see other information
 ### Example Automation
 
 ```yaml
-- id: '1234567890123'
+- id: "1234567890123"
   alias: overnight_low_kitchen_lights
   description: Turn on the lights in the kitchen if my blood sugar drops low overnight
   trigger:
-  - below: '65'
+  - below: "65"
     entity_id: sensor.blood_glucose
     platform: numeric_state
   condition: time
-    after: '22:00:00'
+    after: "22:00:00"
-    before: '06:00:00'
+    before: "06:00:00"
   action:
   - service: light.turn_on
       data:

source/_integrations/nissan_leaf.markdown

@@ -83,7 +83,7 @@ You can use the `nissan_leaf.start_charge` service to send a request to the Niss
 ```yaml
 - service: nissan_leaf.start_charge
   data:
-    vin: '1HGBH41JXMN109186'             # replace
+    vin: "1HGBH41JXMN109186"             # replace
 ```
 
 ## Updating on-demand using Automation
@@ -92,19 +92,19 @@ You can also use the `nissan_leaf.update` service to request an on-demand update
 
 ```yaml
 - id: update_when_driver_not_home
-  alias: 'Update when driver not home'
+  alias: "Update when driver not home"
   initial_state: on
   trigger:
     - platform: time_pattern
-      minutes: '/30'
+      minutes: "/30"
   condition:
     - condition: state
       entity_id: device_tracker.drivername   # replace
-      state: 'not_home'
+      state: "not_home"
   action:
     - service: nissan_leaf.update
       data:
-        vin: '1HGBH41JXMN109186'             # replace
+        vin: "1HGBH41JXMN109186"             # replace
 ```
 
 ## Hints

source/_integrations/notify.mysensors.markdown

@@ -21,7 +21,7 @@ action:
   service: notify.mysensors
   data:
     message: Welcome home!
-    target: 'TextSensor 254 1'
+    target: "TextSensor 254 1"
 ```
 
 The following sensor types are supported:

source/_integrations/notify_events.markdown

@@ -80,15 +80,15 @@ Now you can use the `notify.events` service inside your Home Assistant to:
 ```yaml
 - service: notify.events
   data:
-    message: 'Backyard motion detected!'
+    message: "Backyard motion detected!"
     data:
-      level: 'warning'
+      level: "warning"
-      priority: 'high'
+      priority: "high"
       images:
-        - name: 'local_photo.jpg'
+        - name: "local_photo.jpg"
-          path: '/tmp/backyard_cam/motion.jpg'
+          path: "/tmp/backyard_cam/motion.jpg"
-        - name: 'remote_photo.jpg'
+        - name: "remote_photo.jpg"
-          url: 'https://i.ibb.co/Jt1845X/motion.jpg'
+          url: "https://i.ibb.co/Jt1845X/motion.jpg"
 ```
 
 ### Message optional parameters

source/_integrations/nsw_rural_fire_service_feed.markdown

@@ -87,7 +87,7 @@ Depending on your personal circumstances with regards to bush fire risk you may
 # Example configuration.yaml entry
 geo_location:
   - platform: nsw_rural_fire_service_feed
-    entity_namespace: 'nsw_fire_service_feed'
+    entity_namespace: "nsw_fire_service_feed"
     radius: 10
     categories:
       - 'Emergency Warning'

source/_integrations/oasa_telematics.markdown

@@ -20,7 +20,7 @@ Add a sensor to your `configuration.yaml` file as shown in the example:
 sensor:
   - platform: oasa_telematics
     route_id: YOUR_ROUTE_ID
-    stop_id: 'YOUR_STOP_ID'
+    stop_id: "YOUR_STOP_ID"
 ```
 
 The `route_id` can be obtained by looking up the "LineCode" of the route you want at this link: 
@@ -60,5 +60,5 @@ A more extensive example on how to use this sensor:
 sensor:
   - platform: oasa_telematics
     route_id: 1965
-    stop_id: '090006'
+    stop_id: "090006"
 ```

source/_integrations/onkyo.markdown

@@ -23,7 +23,7 @@ media_player:
     host: 192.168.1.2
     name: receiver
     sources:
-      pc: 'HTPC'
+      pc: "HTPC"
 ```
 
  If your receiver has second or third zone’s available, they are displayed as additional media players with the same functionality as the main zone.

source/_integrations/opengarage.markdown

@@ -97,7 +97,7 @@ sensor:
   platform: template
   sensors:
     garage_status:
-      friendly_name: 'Honda Door Status'
+      friendly_name: "Honda Door Status"
       value_template: '{% if states.cover.honda %}
           {% if states.cover.honda.attributes["door_state"] == "open" %}
             Open

source/_integrations/opensky.markdown

@@ -45,14 +45,14 @@ To receive notifications of the entering flights using the [Home Assistant Compa
 
 ```yaml
 automation:
-  - alias: 'Flight entry notification'
+  - alias: "Flight entry notification"
     trigger:
       platform: event
       event_type: opensky_entry
     action:
       service: notify.mobile_app_<device_name>
       data:
-        message: 'Flight entry of {{ trigger.event.data.callsign }}'
+        message: "Flight entry of {{ trigger.event.data.callsign }}"
 ```
 
 {% endraw %}

source/_integrations/openuv.markdown

@@ -94,7 +94,7 @@ automation:
   - alias: Update OpenUV every 30 minutes during the daytime
     trigger:
       platform: time_pattern
-      minutes: '/30'
+      minutes: "/30"
     condition:
       condition: and
       conditions:
@@ -115,11 +115,11 @@ automation:
   - alias: Update OpenUV every 20 minutes while the sun is at least 10 degrees above the horizon
     trigger:
       platform: time_pattern
-      minutes: '/20'
+      minutes: "/20"
     condition:
       condition: numeric_state
       entity_id: sun.sun
-      value_template: '{{ state.attributes.elevation }}'
+      value_template: "{{ state.attributes.elevation }}"
       above: 10
     action:
       service: openuv.update_uv_index_data
@@ -148,7 +148,7 @@ automation:
   - alias: Update OpenUV every hour (24 of 50 calls per day)
     trigger:
       platform: time_pattern
-      minutes: '/60'
+      minutes: "/60"
     action:
       service: openuv.update_data
 ```

source/_integrations/panel_iframe.markdown

@@ -23,14 +23,14 @@ To enable Panel iFrames in your installation, add the following to your `configu
 # Example configuration.yaml entry
 panel_iframe:
   router:
-    title: 'Router'
+    title: "Router"
-    url: 'http://192.168.1.1'
+    url: "http://192.168.1.1"
   fridge:
-    title: 'Fridge'
+    title: "Fridge"
-    url: 'http://192.168.1.5'
+    url: "http://192.168.1.5"
   otherapp:
-    title: 'Other App'
+    title: "Other App"
-    url: '/otherapp'
+    url: "/otherapp"
 ```
 
 {% configuration %}

source/_integrations/persistent_notification.markdown

@@ -70,7 +70,7 @@ action:
 This automation example shows a notification when the Z-Wave network is starting and removes it when the network is ready.
 
 ```yaml
-- alias: 'Z-Wave network is starting'
+- alias: "Z-Wave network is starting"
   trigger:
     - platform: event
       event_type: zwave.network_start
@@ -81,7 +81,7 @@ This automation example shows a notification when the Z-Wave network is starting
         message: "Z-Wave network is starting..."
         notification_id: zwave
 
-- alias: 'Z-Wave network is ready'
+- alias: "Z-Wave network is ready"
   trigger:
     - platform: event
       event_type: zwave.network_ready

source/_integrations/pi_hole.markdown

@@ -68,23 +68,23 @@ Single Pi-hole running via Home Assistant add-on:
 
 ```yaml
 pi_hole:
-  - host: 'localhost:4865'
+  - host: "localhost:4865"
 ```
 
 Multiple Pi-holes:
 
 ```yaml
 pi_hole:
-  - host: '192.168.0.2'
+  - host: "192.168.0.2"
-  - host: '192.168.0.3'
+  - host: "192.168.0.3"
-    name: 'Secondary Pi-hole'
+    name: "Secondary Pi-hole"
 ```
 
 Pi-hole with a self-signed certificate:
 
 ```yaml
 pi_hole:
-  - host: 'pi.hole'
+  - host: "pi.hole"
     ssl: true
     verify_ssl: false
 ```
@@ -93,7 +93,7 @@ Pi-hole with an `api_key` that allows it to be enabled or disabled:
 
 ```yaml
 pi_hole:
-  - host: 'pi.hole'
+  - host: "pi.hole"
     api_key: !secret pi_hole_api_key
 ```
 

source/_integrations/picotts.markdown

@@ -46,5 +46,5 @@ The configuration sample below shows how an entry can look like:
 # Example configuration.yaml entry
 tts:
   - platform: picotts
-    language: 'fr-FR'
+    language: "fr-FR"
 ```

source/_integrations/pilight.markdown

@@ -85,7 +85,7 @@ To enable a Pilight binary sensor in your installation, add the following to you
 # Example configuration.yaml entry
 binary_sensor:
   - platform: pilight
-    variable: 'state'
+    variable: "state"
 ```
 
 {% configuration %}
@@ -133,11 +133,11 @@ A full configuration example could look like this:
 # Example configuration.yaml entry
 binary_sensor:
   - platform: pilight
-    name: 'Motion'
+    name: "Motion"
-    variable: 'state'
+    variable: "state"
     payload:
       unitcode: 371399
-    payload_on: 'closed'
+    payload_on: "closed"
     disarm_after_trigger: true
     reset_delay_sec: 30
 ```
@@ -154,7 +154,7 @@ sensor:
   - platform: pilight
     variable: temperature
     payload:
-      uuid: '0000-b8-27-eb-f447d3'
+      uuid: "0000-b8-27-eb-f447d3"
 ```
 
 {% configuration %}
@@ -185,23 +185,23 @@ This section shows a real life example how to use values of a weather station.
 # Example configuration.yaml entry
 sensor:
   - platform: pilight
-    name: 'Temperature'
+    name: "Temperature"
-    variable: 'temperature'
+    variable: "temperature"
     payload:
       uuid: 0000-b8-27-eb-f1f72e
-    unit_of_measurement: '°C'
+    unit_of_measurement: "°C"
   - platform: pilight
-    name: 'Humidity'
+    name: "Humidity"
-    variable: 'humidity'
+    variable: "humidity"
     payload:
       uuid: 0000-b8-27-eb-f1f72e
-    unit_of_measurement: '%'
+    unit_of_measurement: "%"
   - platform: pilight
-    name: 'Battery'
+    name: "Battery"
-    variable: 'battery'
+    variable: "battery"
     payload:
       uuid: 0000-b8-27-eb-f1f72e
-    unit_of_measurement: '%'
+    unit_of_measurement: "%"
 ```
 
 ## Switch
@@ -298,13 +298,13 @@ switch:
           systemcode: 14462
           unit: 6
           id: 34
-          state: 'on'
+          state: "on"
         off_code_receive:
           protocol: daycom
           systemcode: 14462
           unit: 6
           id: 34
-          state: 'off'
+          state: "off"
 ```
 
 ## Light
@@ -349,12 +349,12 @@ light:
           protocol: kaku_dimmer
           id: 23298822
           unit: 10
-          state: 'on'
+          state: "on"
         off_code_receive:
           protocol: kaku_dimmer
           id: 23298822
           unit: 10
-          state: 'off'
+          state: "off"
 ```
 
 ## Troubleshooting

source/_integrations/plant.markdown

@@ -142,28 +142,28 @@ sensor:
   - platform: mqtt
     name: my_plant_moisture
     state_topic: my_plant_topic
-    value_template: '{{ value_json.moisture | int }}'
+    value_template: "{{ value_json.moisture | int }}"
-    unit_of_measurement: '%'
+    unit_of_measurement: "%"
   - platform: mqtt
     name: my_plant_battery
     state_topic: my_plant_topic
-    value_template: '{{ value_json.battery | int }}'
+    value_template: "{{ value_json.battery | int }}"
-    unit_of_measurement: '%'
+    unit_of_measurement: "%"
   - platform: mqtt
     name: my_plant_temperature
     state_topic: my_plant_topic
-    value_template: '{{ value_json.temperature | float }}'
+    value_template: "{{ value_json.temperature | float }}"
-    unit_of_measurement: '°C'
+    unit_of_measurement: "°C"
   - platform: mqtt
     name: my_plant_conductivity
     state_topic: my_plant_topic
-    value_template: '{{ value_json.conductivity | int }}'
+    value_template: "{{ value_json.conductivity | int }}"
-    unit_of_measurement: 'µS/cm'
+    unit_of_measurement: "µS/cm"
   - platform: mqtt
     name: my_plant_brightness
     state_topic: my_plant_topic
-    value_template: '{{ value_json.brightness | int }}'
+    value_template: "{{ value_json.brightness | int }}"
-    unit_of_measurement: 'Lux'
+    unit_of_measurement: "Lux"
 ```
 
 {% endraw %}

source/_integrations/plex.markdown

@@ -247,17 +247,17 @@ play_plex_on_tv:
     - service: media_player.select_source
       entity_id: media_player.smart_tv
       data:
-        source: 'Plex'
+        source: "Plex"
     - wait_template: "{{ is_state('media_player.smart_tv', 'On') }}"
-      timeout: '00:00:10'
+      timeout: "00:00:10"
     - service: plex.scan_for_clients
     - wait_template: "{{ not is_state('media_player.plex_smart_tv', 'unavailable') }}"
-      timeout: '00:00:10'
+      timeout: "00:00:10"
       continue_on_timeout: false
     - service: media_player.play_media
       data:
         entity_id: media_player.plex_smart_tv
-        media_content_id: '{"library_name": "Movies", "title": "Zoolander"}'
+        media_content_id: "{"library_name": "Movies", "title": "Zoolander"}"
         media_content_type: movie
 ```
 

source/_integrations/point.markdown

@@ -100,7 +100,7 @@ automation:
   trigger:
   - platform: state
     entity_id: binary_sensor.point_button_press  # Change this accordingly
-    to: 'on'
+    to: "on"
   action:
   - service: persistent_notification.create
     data:

source/_integrations/prometheus.markdown

@@ -157,7 +157,7 @@ You can then configure Prometheus to fetch metrics from Home Assistant by adding
 
 ```yaml
 # Example Prometheus scrape_configs entry
-  - job_name: 'hass'
+  - job_name: "hass"
     scrape_interval: 60s
     metrics_path: /api/prometheus
 
@@ -166,7 +166,7 @@ You can then configure Prometheus to fetch metrics from Home Assistant by adding
       api_password: ['PASSWORD']
 
     # Long-Lived Access Token
-    bearer_token: 'your.longlived.token'
+    bearer_token: "your.longlived.token"
 
     scheme: https
     static_configs:

source/_integrations/pvoutput.markdown

@@ -58,21 +58,21 @@ sensor:
   - platform: template
     sensors:
       power_consumption:
-              value_template: '{% if is_state_attr("sensor.pvoutput", "power_consumption", "NaN") %}0{% else %}{{ state_attr("sensor.pvoutput", "power_consumption") }}{% endif %}'
+              value_template: "{% if is_state_attr("sensor.pvoutput", "power_consumption", "NaN") %}0{% else %}{{ state_attr("sensor.pvoutput", "power_consumption") }}{% endif %}"
-        friendly_name: 'Using'
+        friendly_name: "Using"
-        unit_of_measurement: 'Watt'
+        unit_of_measurement: "Watt"
       energy_consumption:
         value_template: '{{ "%0.1f"|format(state_attr("sensor.pvoutput", "energy_consumption")|float/1000) }}'
-        friendly_name: 'Used'
+        friendly_name: "Used"
-        unit_of_measurement: 'kWh'
+        unit_of_measurement: "kWh"
       power_generation:
         value_template: '{% if is_state_attr("sensor.pvoutput", "power_generation", "NaN") %}0{% else %}{{ state_attr("sensor.pvoutput", "power_generation") }}{% endif %}'
-        friendly_name: 'Generating'
+        friendly_name: "Generating"
-        unit_of_measurement: 'Watt'
+        unit_of_measurement: "Watt"
       energy_generation:
         value_template: '{% if is_state_attr("sensor.pvoutput", "energy_generation", "NaN") %}0{% else %}{{ "%0.2f"|format(state_attr("sensor.pvoutput", "energy_generation")|float/1000) }}{% endif %}'
-        friendly_name: 'Generated'
+        friendly_name: "Generated"
-        unit_of_measurement: 'kWh'
+        unit_of_measurement: "kWh"
 ```
 
 {% endraw %}

source/_integrations/qbittorrent.markdown

@@ -24,7 +24,7 @@ To enable this sensor, add the following lines to your `configuration.yaml`:
 # Example configuration.yaml entry
 sensor:
   - platform: qbittorrent
-    url: 'http://<hostname>:<port>'
+    url: "http://<hostname>:<port>"
     username: YOUR_USERNAME
     password: YOUR_PASSWORD
 ```

source/_integrations/rainbird.markdown

@@ -123,7 +123,7 @@ automation:
   - alias: Turn irrigation on
     trigger:
       platform: time
-      at: '5:30:00'
+      at: "5:30:00"
     action:
       service: rainbird.start_irrigation
       entity_id: switch.sprinkler_1

source/_integrations/recswitch.markdown

@@ -24,8 +24,8 @@ To enable this switch, add the following lines to your `configuration.yaml`:
 # Example configuration.yaml entry
 switch:
   - platform: recswitch
-    host: 'IP_ADDRESS'
+    host: "IP_ADDRESS"
-    mac: 'MAC_ADDRESS'
+    mac: "MAC_ADDRESS"
 ```
 
 {% configuration %}

source/_integrations/rejseplanen.markdown

@@ -20,7 +20,7 @@ Add a sensor to your `configuration.yaml` file as shown in the example:
 # Example configuration.yaml entry
 sensor:
   - platform: rejseplanen
-    stop_id: 'YOUR_STOP_ID'
+    stop_id: "YOUR_STOP_ID"
 ```
 
 {% configuration %}
@@ -94,7 +94,7 @@ A working example on how to use this sensor with direction:
 # Example configuration.yaml entry with the correct use of direction.
 sensor:
   - platform: rejseplanen
-    stop_id: '713000702'
+    stop_id: "713000702"
     direction:
       - 'Bjergegårdsvej/Rylevej (Favrskov Kom)'
       - 'Skanderborg Busterminal (Skanderborg Kom)'
@@ -126,9 +126,9 @@ A more extensive example on how to use this sensor:
 # Example configuration.yaml entry
 sensor:
   - platform: rejseplanen
-    name: 'Elmegade 350S'
+    name: "Elmegade 350S"
-    stop_id: '000045740'
+    stop_id: "000045740"
-    route: 'Bus 350S'
+    route: "Bus 350S"
     direction:
       - 'Herlev St.'
       - 'Ballerup St.'

source/_integrations/rest.markdown

@@ -27,7 +27,7 @@ sensor:
   - platform: rest
     resource: http://IP_ADDRESS/ENDPOINT
     method: POST
-    payload: '{ "device" : "heater" }'
+    payload: "{ "device" : "heater" }"
 ```
 
 or a template based request:

source/_integrations/rest_command.markdown

@@ -19,7 +19,7 @@ To use this component, add the following lines to your `configuration.yaml` file
 # Example configuration.yaml entry
 rest_command:
   example_request:
-    url: 'http://example.com/'
+    url: "http://example.com/"
 ```
 
 {% configuration %}
@@ -105,7 +105,7 @@ rest_command:
     method: POST
     headers:
       authorization: !secret rest_headers_secret
-      accept: 'application/json, text/html'
+      accept: "application/json, text/html"
       user-agent: 'Mozilla/5.0 {{ useragent }}'
     payload: '{"profile":{"status_text": "{{ status }}","status_emoji": "{{ emoji }}"}}'
     content_type:  'application/json; charset=utf-8'
@@ -129,7 +129,7 @@ Call the new service from [developer tools](/docs/tools/dev-tools/) in the sideb
 
 ```yaml
 automation:
-- alias: 'Arrive at Work'
+- alias: "Arrive at Work"
   trigger:
     platform: zone
     entity_id: device_tracker.my_device

source/_integrations/script.markdown

@@ -210,7 +210,7 @@ script:
     sequence:
       - condition: state
         entity_id: switch.pushover_notifications
-        state: 'on'
+        state: "on"
       - service: notify.pushover
         data:
           title: "{% raw %}{{ title }}{% endraw %}"

source/_integrations/velbus.markdown

@@ -125,18 +125,18 @@ The actual linking can be realized by two automation rules. One rule to control
       conditions:
       - condition: state
         entity_id: light.led_push_button_10
-        state: 'on'
+        state: "on"
       - condition: state
         entity_id: light.living
-        state: 'off'
+        state: "off"
     - condition: and
       conditions:
       - condition: state
         entity_id: light.led_push_button_10
-        state: 'off'
+        state: "off"
       - condition: state
         entity_id: light.living
-        state: 'on'
+        state: "on"
   - entity_id: light.led_push_button_10
     service: light.toggle
 ```

source/_integrations/workday.markdown

@@ -138,7 +138,7 @@ automation:
   condition:
     condition: state
     entity_id: 'binary_sensor.workday_sensor'
-    state: 'on'
+    state: "on"
   action:
     service: switch.turn_on
     entity_id: switch.heater

source/_lovelace/picture-elements.markdown

@@ -591,9 +591,9 @@ elements:
   - type: conditional
     conditions:
       - entity: sensor.presence_daughter
-        state: 'home'
+        state: "home"
       - entity: sensor.presence_dad
-        state: 'not_home'
+        state: "not_home"
     elements:
       - type: state-icon
         entity: switch.tv