diff --git a/source/_integrations/weheat.markdown b/source/_integrations/weheat.markdown
new file mode 100644
index 00000000000..73c0e05f3f9
--- /dev/null
+++ b/source/_integrations/weheat.markdown
@@ -0,0 +1,48 @@
+---
+title: Weheat
+description: Instructions on setting up Weheat within Home Assistant.
+ha_category:
+  - Energy
+  - Climate
+  - Sensor
+ha_iot_class: Cloud Polling
+ha_release: "2024.10"
+ha_config_flow: true
+ha_codeowners:
+  - '@jesperraemaekers'
+  - '@kjell-van-straaten'
+ha_domain: weheat
+ha_platforms:
+  - sensor
+ha_integration_type: integration
+---
+
+The **Weheat** {% term integration %} allows you to display your [Weheat](https://www.weheat.nl/) devices through Home Assistant.
+
+## Prerequisites
+
+- You need a Weheat account, **username**, and **password**
+- When adding the integration in Home Assistant, you will be prompted to enter a **Name**, **Client ID**,  and **Client Secret**.
+  - The name is arbitrary, the ID and secret are provided in the [knowledge base](https://support.weheat.nl/s/article/Is-er-een-offici%C3%ABle-Home-Assistant-integratie).
+- During setup of the integration in Home Assistant, you will be redirected to the Weheat login provider. Log in using your **username** and **password**.
+  - After login, select **link account** to link your account.
+
+{% include integrations/config_flow.md %}
+
+## Entities
+
+### Sensors
+
+The Weheat integration provides the following sensors:
+
+- **Output power**: Thermal power added to the water in Watts
+- **Input power**: Electrical power in Watts
+- **COP**: The Coefficient of performance between the above two power measurements
+- **Water inlet temperature**: The heat pump water inlet temperature in °C
+- **Water outlet temperature**: The heat pump water outlet temperature in °C
+- **Central heating inlet temperature**: The central heating inlet temperature in °C
+- **Outside temperature**: Outside temperature in °C
+- **Electricity used**: Total electricity used in kWh
+- **State**: The current heat pump state
+- **DHW top temperature**: The domestic hot water temperature in the top of the vessel in °C (optional)
+- **DHW bottom temperature"**: The domestic hot water temperature in the bottom of the vessel in °C (optional)