mirror of
https://github.com/home-assistant/home-assistant.io.git
synced 2025-07-18 23:06:58 +00:00
Update zwave devices page (#10603)
S2 still not supported in OZW as of 10/2019 Update config github link to the OZW1.4 branch since HA is still on 1.4 and the master branch is for OZW1.6
This commit is contained in:
parent
107414ac13
commit
7d8944fe54
@ -33,9 +33,9 @@ The key improvements are:
|
||||
|
||||
### Z-Wave Security 2
|
||||
|
||||
From 2 April 2017 all newly approved Z-Wave devices will have to support the Security 2 (S2) framework. At the time of writing this (March 2018) OpenZWave does not support the S2 framework.
|
||||
From 2 April 2017 all newly approved Z-Wave devices will have to support the Security 2 (S2) framework. At the time of writing this (October 2019) OpenZWave does not support the S2 framework.
|
||||
|
||||
## Device power
|
||||
## Device Power
|
||||
|
||||
Your Z-Wave mesh network is built with the devices that are mains powered (whether directly, or via a USB adapter), these relay traffic for other nodes, building the network. These devices are always awake and you can query them, or send configuration changes, at any time.
|
||||
|
||||
@ -65,8 +65,8 @@ Polling needs to be enabled per device, you can control this through the *pollin
|
||||
|
||||
The Central Scene command class isn't yet supported in OpenZWave (there is [work in progress](https://github.com/OpenZWave/open-zwave/pull/1125) to provide it it), though Home Assistant has introduced some support with [change 9178](https://github.com/home-assistant/home-assistant/pull/9178) which was part of 0.53 and [documented here](/docs/z-wave/device-specific/#homeseer-switches).
|
||||
|
||||
## Is my device supported
|
||||
## Is my device supported?
|
||||
|
||||
You can check to see if OpenZWave supports your particular device by looking at the [OpenZWave github](https://github.com/OpenZWave/open-zwave/tree/master/config). Be aware that being listed here doesn't mean that it will be supported in Home Assistant, since the version of OpenZWave used by Home Assistant will often lag the github by a few months.
|
||||
You can check to see if OpenZWave supports your particular device by looking at the [OpenZWave 1.4 github](https://github.com/OpenZWave/open-zwave/tree/1.4/config). Be aware that being listed here doesn't mean that it will be supported in Home Assistant, since the version of OpenZWave used by Home Assistant will often lag the github by a few months.
|
||||
|
||||
Even if your device isn't listed there, it's likely that it will still work as expected as long as the device complies with the Z-Wave standards. The OpenZWave wiki describes how [you can add support](https://github.com/OpenZWave/open-zwave/wiki/Adding-Devices) for your device if it isn't listed.
|
||||
|
Loading…
x
Reference in New Issue
Block a user